Timers
|
102
|
Repeat Cycle Timer Relay - one delayed contact with individual on and off times. .05s to 60 Hours. Replaces RZ7-FSH3VU23 / 17121 Timer.
|
|
|
191
|
Multi-Function Din Rail Mounted Timer. 10 Timing Modes. 0.1 second to 10 day range. Peltec Timer. Used on PCU-ESP for third-party fan control.
|
|
|
J-TAG Programming Cable
|
J-Tag programming cable for STM processor. Needs Seggar J-link software (available on the internet for free)
|
|
|
RZ7-FSA4UU23
|
Time Delay Relay - one instantaneous contact and one delayed contact. .05s to 60 Hours.
Replaces D12DME11.
|
|
|
RZ7-FSE3GU23
|
Fleeting off-delay timer - one delayed contact, activates once control contact is off. .5 to 10 Minutes
|
|
|
|
88867135
|
Delay on break electronic timer (post purge), one changeover relay 8 amps @ 250 volt rated, 1 second to 100 hour range, 24v ac/dc or 120/240v ac, LED status indicator, requires 8 pin socket base (PF083A). Obsolete, use TIMER182.
|
|
|
Blower Delay Stop
|
Blower Delay Stop. Allows supply fan to run after the burner has shut off Factory set at 90 secs for indirect 30 secs for direct.
|
|
|
BRE7A6
|
Pre purge timer, 120v ac, 0-60 minute range (replaced BR17A6).
|
|
|
FM1D20E-120
|
Electronic 7 day Digital Time Clock to cycle heater on and off at selected times of the day, 120v operating voltage, Flush Mount.
|
|
|
PF083A
|
8 PIN socket non latching style timer base.
|
|
|
RZ7-FSA4UU23
|
Time Delay Relay - one instantaneous contact and one delayed contact. .05s to 60 Hours. Replaces D12DME11.
|
|
|
TIMER182
|
Delay on break (post purge)/delay on make electronic timer, two changeover relays rated at 2,00VA AC, 192W DC, 0.1 second to 10 minute range, 12-240V AC/DC (AC 50/60hz), green LED input indicator, red LED output indicator, DIN rail mount.
|
|
|
|
|