G10
|
10" forward curved, centrifugal blower. Permanently lubricated ball bearings. Galvanized finish. 3/4" x 19" Shaft. 0-4000 CFM. 2500 max. RPM. Used in heated and non-heated supply fans.
|
|
|
G12
|
12" forward curved, centrifugal blower. Permanently lubricated ball bearings. Galvanized finish. 1500-5000 CFM. 1" x 22" Shaft. 2140 max. RPM. Used in heated and non-heated supply fans.
|
|
|
G15-10
|
BLOWER 15" - Rubber mount bearing, 2000-6500 CFM, 1" Shaft 22" Long, 1077 MAX RPM, Replacement for A15-11A. Used in older CFA 15's
|
|
|
G15-PB
|
15" forward curved, centrifugal blower. Pillow Block ball bearings. Galvanized finish. 1" x 27-1/8" Shaft. 2000-7500 CFM. 1800 max. RPM. Used in heated and non-heated supply fans.
|
|
|
G18-PB
|
18" forward curved, centrifugal blower. Pillow Block ball bearings. Galvanized finish. 3500-12000 CFM. 1-3/16" x 34" Shaft. 1450 max. RPM. Used in heated and non-heated supply fans.
|
|
|
G7
|
7" forward curved, centrifugal blower. Permanently lubricated ball bearings. Galvanized finish. 400-2000 CFM. 3/4" x 14-3/16" Shaft. 3600 max. RPM. Used in heated and non-heated supply fans.
|
|
|
G7D
|
7" forward curved, centrifugal blower. Galvanized finish. 0-2000 CFM. 3600 max. RPM. Used in heated and non-heated supply fans. LH-RCD (Left Hub, Right Center Disk) 8 weldnuts. Replacement for Canarm G7DD. Requires G7DDMM motor mount. P/N G7D RH-LCD (A0019617) used for opposite controls.
|
|
|
G7D RH-LCD
|
7" forward curved, centrifugal blower. Galvanized finish. 0-2000 CFM. 3600 max. RPM. Used in heated and non-heated supply fans. 8 weldnuts. RH-LCD (Right Hub, Left Center Disk) used for opposite controls. Replacement for Canarm G7DD. Requires G7DDMM motor mount. P/N G7D Used for standard airflow.
|
|
|
RG10
|
BLOWER 10" - Galvanized finish, Ball bearing, 1000-4000 CFM, 3/4 MAX BHP, 3/4" Shaft, 2500 MAX RPM, used in industrial non-recirculating direct fired heaters. 10" Blower with feet
|
|
|
RG10M
|
BLOWER 10" - Galvanized finish, Ball bearing, 1000-4000 CFM, 3/4 MAX BHP, 3/4" Shaft, 2500 MAX RPM, used in industrial recirculating direct fired heaters. 10" Blower with feet, G10, 9005441
|
|
|
RG12
|
BLOWER 12" - Galvanized finish, Ball bearing, 1500-5000 CFM, 2 MAX BHP, 1" Shaft, 2140 MAX RPM, used in industrial non-recirculating direct fired heaters. 12" Blower with feet
|
|
|
RG12M
|
BLOWER 12" - Galvanized finish, Ball bearing, 1500-5000 CFM, 2 MAX BHP, 1" Shaft, 2140 MAX RPM, used in industrial recirculating direct fired heaters.12" Blower with feet, G12, 9005464
|
|
|
RG15-PB
|
BLOWER 15" - Galvanized finish, Pillow block ball bearing, 2000-7500 CFM, 5 MAX BHP, 1" Shaft, 1800 MAX RPM, used in industrial non-recirculating direct fired heaters. Includes (2) M100562I mounting braces.
|
|
|
RG15EW
|
BLOWER 15" - Galvanized finish, 2000-7500 CFM, 5 MAX BHP, 1" Shaft, 1800 MAX RPM, used in industrial non-recirculating direct fired heaters. Includes (2) M100562I mounting braces.
|
|
|
RG18-PB
|
18" forward curved, centrifugal blower. Pillow block ball bearings. Galvanized finish. 4000-12000 CFM. 1-3/16" Shaft. 1450 max. RPM. Used in heated and non-heated supply fans. With (2) B3BLBC brackets.
|
|
|
|
Forward Curved, Double Inlet Blowers (G-Series)
