Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

TH-SIF15DD Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

CK48HF15FF01-50-115 0.75 1 115 V 8.7 0.5" 48Z 21 lbs 1360 HSSA

ODP (Open Drip Proof)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.
SIF1135DDMTRCVRBASE-FM	Motor Cover Base used on SIF11-15DD with face mounted motors (48 Frame).
KBWC-115K	Motor Speed Control, Solid State, Model KBWC-115K (H6321), 15 AMPS - 120 V.A.C. Factory set to reduce to 65VAC under motor load. (75 VAC with 100 Watt load)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
SIF11RTRD	Rotary Switch Plate for Square Inline Fan with 11" wheel.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HF15FF01-50-230 0.75 1 230 V 4.4 0.5" 48Z 21 lbs 1400 HSSA

ODP (Open Drip Proof)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.
SIF1135DDMTRCVRBASE-FM	Motor Cover Base used on SIF11-15DD with face mounted motors (48 Frame).
KBWC-25K-H6182	Motor Speed Control, Solid State, Model KBWC-25K (H6182), 5 AMPS - 230 V.A.C. @25°C. Factory set to reduce to 130 VAC under motor load. (150 VAC with 100 Watt load). Used On DU/DR 85 HFA.
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
SIF11RTRD	Rotary Switch Plate for Square Inline Fan with 11" wheel.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HF15FF01-60-115 0.75 1 115 V 9.8 0.5" 48Z 22 lbs 1625 HSSA

ODP (Open Drip Proof)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.
SIF1135DDMTRCVRBASE-FM	Motor Cover Base used on SIF11-15DD with face mounted motors (48 Frame).
KBWC-115K	Motor Speed Control, Solid State, Model KBWC-115K (H6321), 15 AMPS - 120 V.A.C. Factory set to reduce to 65VAC under motor load. (75 VAC with 100 Watt load)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
SIF11RTRD	Rotary Switch Plate for Square Inline Fan with 11" wheel.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HF15FF01-60-230 0.75 1 208-230 V 4-4.9 0.5" 48Z 21 lbs 1625 HSSA

ODP (Open Drip Proof)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.
SIF1135DDMTRCVRBASE-FM	Motor Cover Base used on SIF11-15DD with face mounted motors (48 Frame).
KBWC-25K-H6182	Motor Speed Control, Solid State, Model KBWC-25K (H6182), 5 AMPS - 230 V.A.C. @25°C. Factory set to reduce to 130 VAC under motor load. (150 VAC with 100 Watt load). Used On DU/DR 85 HFA.
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
SIF11RTRD	Rotary Switch Plate for Square Inline Fan with 11" wheel.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP0014 1 3 208-230/460 V 3.1-2.8/1.4 0.875" 143 35 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

00118OT3H143T-S 1 3 575 V 1.2 0.875" 143T 34 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP0014-50HZ 1 3 190/208-220/380/415 V 3.2/2.9-2.8/1.6/1.5 0.875" 143 35 lbs 1429 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP1/54-50HZ 1.5 3 190/208/380/415 V 4.7/4.4/2.3/2.3 0.875" 145 46 lbs 1426 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

00158OT3H145T-S 1.5 3 575 V 1.6 0.875" 145T 42 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP1/54 1.5 3 190/208-230/380/460 V 4.6/4.4-4/2.3/2 0.875" 145 46 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP0022 2 3 208-230/460 V 5.4-4.9/2.4 0.875" 145T 44 lbs 3600 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP0024 2 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

00218OT3H145T-S 2 3 575 V 2.1 0.875" 145T 39 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP0022-50 2 3 190/380 V 6.4/3.2 0.875" 145T 35 lbs 3000 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

DTP0032 3 3 208-230/460 V 8.6-7.8/3.9 0.875" 145T 35 lbs 3600 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
SIF1135DDMTRCVRBASE	Motor Cover Base used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRS	Motor Cover Side used on SIF11-15DD with base mounted motors.
SIF1135DDMTRCVRT	Motor Cover Top used on SIF11-15DD with base mounted motors.
SIF1135DDMTRSP	Motor Seat Plate for direct drive Square Inline Fan with 11", 13", or 15" wheels.
SIFRTRD	Rotary Switch Plate for Square Inline Fan with 11-20" wheel.

BMN48-560I1-ES-M52-CA-60-115 0.75 1 115 V 8.9 0.5" 48 12 lbs 1800 Telco Intercontinental Corp