Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

DR360HTH Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP0036 3 3 208-230/380/460 V 10.2-9.2/5.4/4.6 1.375" 213T 120 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP0056 5 3 208-230/380/415/460 V 15.8-14.3/8.4/8/7.2 1.375" 215T 123 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP7/56-50 7.5 3 190/220/380 V 22.3/19.3/11.2 1.625" 254T 170 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP7/56 7.5 3 208-230/460 V 22.3-20.2/10.1 1.625" 254T 170 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP0104 10 3 190/208-230/380/460 V 29.9/27-24.4/15/12.2 1.375" 215T 143 lbs 1755 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP0106 10 3 208-230/460 V 28.4-25.7/12.9 1.625" 256T 234 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

DTP0104-50 10 3 190/380/415 V 30/15/13.7 1.375" 215T 143 lbs 1436 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

XP0056 5 3 208-230/460 V 14.1-12.8/6.4 1.375" 215T 211 lbs 1150 Mimco/TECO

Explosion Proof

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00312ET3H213T-W22 3 3 575 V 3.5 1.375" 213T 163 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00309ET3E215T-W22 3 3 208-230/460 V 10.1-9.1/4.5 1.375" 215T 176 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00512ET3E215T-W22 5 3 208-230/460 V 15.2-13.7/6.9 1.375" 215T 172 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00709ET3E256T-W22-50 5 3 190/380 V 19.3/9.7 1.625" 256T 313 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

GP0056 5 3 208-230/460 V 15.6-14/7 1.375" 215T 164 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00509ET3E254T-W22 5 3 208-230/460 V 16.8-15.2/7.6 1.625" 254T 284 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
7803	Disconnect Switch - Three Pole, 3 Phs., 30 AMP, 600V. Switch Used For Fan Disconnect. Used on utility sets. Replaces 0140-3000. Switch is rated for the following. Three Phase, 3 Hp @120V, 7.5 Hp @ 240V, 10 Hp @ 480V, 20 Hp @ 600V
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00712ET3H254T-W22 7.5 3 575 V 7.6 1.625" 254T 316 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

00709ET3E256T-W22 7.5 3 208-230/460 V 24.5-22.2/11.1 1.625" 256T 313 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

NP7/56 7.5 3 208-230/460 V 21.1-19.1/9.6 1.625" 254T 267 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

GP0104 10 3 190/200-208-230/380/400/460 V 29.6/27.8-26.6-24/14.8/13.9/12 1.375" 215T 159 lbs 1755 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

01012ET3H256T-W22 10 3 575 V 10.3 1.625" 256T 325 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

GP0104-50 10 3 190/380 V 29.7/14.9 1.375" 215T 159 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800043 [10 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800026 [10 used]	A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc
800032 [18 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
800034 [21 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
F5020036 [1 used]	Baffle 25 1/4" Dia. Ins. Venturi X 9 15/16 Height, .080 x 54" 1100-0 Alum. For BDU36 / BDU36HP / BDCR36 (Spun) (-0 Drill 1.500 Hole) (-1 No Hole) (620170)
F8040036 [1 used]	Base Assembly For BDU36 / BDU36HP / BDCR36 (-0 Drill .875 Hole)(-1 No Hole)
SCR-36 [1 used]	Bird Screen - 1/2" x 1/2" Wire Screen for Belt Drive Upblast & Downblast Fans
92323A575 [4 used]	Bolt Whiz - Grade 5 Steel Serrated Flange Head Cap Screw, 1/2"-13 Thread, 1-1/2" Long, Fully Threaded.
F5170036 [1 used]	Bottom Skirt 42" Dia. Out. Bottom X 62 3/16" Dia. Out. Top X 14 5/8" Height, .090 x 72" 1100-0 Alum. For BDU36 / BDU36HP / BDCR36 (Spun) (-0) (-1)
LT 1/2 Conduit [3 used]	Conduit 1/2" Flexible - Non Metallic Gray, For Use With Non Metallic Liquid Tight Connectors.
F214BDCR [1 used]	Cooling Tube 3 1/2" Out. Dia. X 2.75" Long, .080 Wall Thk. Extruded Alum. For BDCR18, BDCR20, BDCR24, BDCR30 and BDCR36.
F2100001 [1 used]	Cooling Tube Grommet 3 1/2" Ins. Dia., 4 1/2" Out. Dia., 3/8" Thk., Black Silicone Rubber(620047)
800103 [2 used]	Cotter Pin Hammerlock Zinc 1/16 X 1/8 X 4 1/2, Steel
ETL-Label [1 used]	Label - ETL Information Label. Label located in job docs should be printed and shipped.
A-17 [6 used]	Ludwig A-17 Clip (Hood Retaining) 1" Width X 2 1/2" Height, Spring Steel - Exh.fans, Includes Mounting Hardware When Shipped As A Replacement Part. Old AX# A0005723.
F5150036-S [1 used]	Motor Cover 42" Dia. Ins. X 1" Height, .24GA Galv. BDU/HP/BDCR 36 - This part is designed to work with F2050036-S, 20 GA Galv shaft wrapper. The aluminum version motor cover F5150036 is obsolete, you will need to replace the shaft wrapper to F2050036-S.
F2090036DD [1 used]	Motor Plate 12 13/16" X 6 1/16" X 28 1/2", 12 Ga. Galv. Steel For DU/DR 300 and DU/DR 360. Mounts 3 phase 7.5 HP motors with 213T frames.
F2080036DDR [1 used]	Motor Plate Right Support 22 1/2" X 10 5/8" X 1 5/8", 12 Ga. Galv. Steel For DU/DR 300 and DU/DR 360.
F2090036DDSUP [1 used]	Motor Plate Support 12 3/4" X 17" X 11 7/8", 12 Ga. Galv. Steel For DU/DR 300 and DU/DR 360.
800113-D60 [7 used]	Motor/Blower Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 60
800031 [20 used]	Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
99904A104 [4 used]	Nut Whiz - Zinc-Plated Steel Serrated-Flange Hex Locknut 1/2"-13 Thread Size, 3/4" W, 29/64" O'all Height. Grade 5.
SB6-4-RIVET [15 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
800023B [30 used]	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
800114 [1 used]	Shaft Key USBI 5/16" X 5/16" X 2" Long, Steel
F2050036-S [1 used]	Shaft Wrapper 41 3/4" Dia. Out. X 15" Height. For BDU36 / BDU36HP / BDCR36
SKID-7272 [1 used]	Skid - 72" X 72" - Used For BDU/BDCR 36.
SSPI-08-06-RIVET [38 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
F5040036 [1 used]	Top plate / Motor Mount 41 5/8" Dia. Out. X 1" Height, 14 Ga. Galv. Steel x 43.5" For BDU36 / BDU36HP / BDCR36 (Spun) (-0 Drill .875 Hole) (-1 No Hole)
F8030036-M [10 used]	Vertical Brace Assy With PEM Nut. 1 1/2" X 22", 12 Ga. Galv. Steel For GV36 (A0025417).
800014 [20 used]	Washer Nylon 1/4 Dia. Ins. X 9/16 Dia. Out. X 1/16 Thk., Nylon (Color White)
F8010036P1-B [1 used]	Wheel Assembly 37 1/4" Dia. Top X 27 9/16" Dia. Ins. Bottom X 15 1/8" High. Uses 10" Ø B Hub with P1 Bushings. *Requires P1 type split taper bushing if ordered as a replacement part.
5/16-18 WHIZNUT [10 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.

Curbs

Part
CRB42.5X12E	ROOF CURB - 42.50" Square X 12" High.
CRB42.5X14E	ROOF CURB - 42.50" Square X 14" High.
CRB42.5x20E	ROOF CURB - 42-1/2" sq. x 20" high.
CRB42.5x24E	ROOF CURB - 42-1/2" sq. x 24" high
CRB42.5x26E	ROOF CURB - 42-1/2" sq. x 26" high

Options

Part
I 39 BDD w/ 460V Motor	MOTORIZED BACKDRAFT DAMPER - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq. Actuator is 460V For the BDU36, BDCR36
Show parts
	MTR-611-460 [1 used]	460 v Motor Pack for I Series Backdraft Dampers
	I 39 BDD [1 used]	Gravity Backdraft Damper - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq.
I 39 BDD w/ 120/240V Motor	MOTORIZED BACKDRAFT DAMPER - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq. Actuator is 120/240V For the BDU36, BDCR36
Show parts
	MTR-611 [1 used]	120/240 v Motor Pack for I Series Backdraft Dampers
	I 39 BDD [1 used]	Gravity Backdraft Damper - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq.
I 39 BDD w/ 24V Motor	MOTORIZED BACKDRAFT DAMPER - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq. Actuator is 24V For the BDU36, BDCR36
Show parts
	MTR-611 24V [1 used]	24 V Motor Pack for I Series Backdraft Dampers
	I 39 BDD [1 used]	Gravity Backdraft Damper - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq.
FAN HEAT BAFFLE	Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
Show parts
	INSULATION/sq ft [3 used]	INSULATION (Price per Sq Foot)
HD-HBKIT-LOCKING	HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
	800034 [44 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [44 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	910XH [1 used]	HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. 10 GA Galvanized.
HD-HBKIT-LOCKING-EXT	HINGE KIT - Extended Heavy Duty Hinge kit with locking spring pin on either side for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
	800034 [54 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [54 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
MIAMI-DADE NOA-1 Aluminum Downblast 36	Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Downblast size 36. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Show parts
	F2370036 [1 used]	Angle Ring 1/8" X 1" X 1" Aluminum Angle, 61 5/16" Dia. Out. For BDU36 / BDU36HP / BDCR36 (620440A)
	800023B [10 used]	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
I 39 BDD	Gravity Backdraft Damper - with flange, damper is 39" sq., 2" deep, O.D. of flange is 41" sq.
Shaft Grounding Ring Option	Shaft Grounding Ring Option
EPO36-Enamel	Tan Enamel Coating For 36" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.
F21024-36VFDMT	VFD Mounting bracket for DU/DR 300 and 360.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.