Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Disconnect Switch - Three Pole, 1, 3 Phs., 30 AMP, 600V. Used on CASRE fans with disconnect arm. Switch is rated for the following. Nema 4x
Single Phase: 1 Hp @120V, 3 Hp @ 220-277V, 5 Hp @ 440-480V
Three Phase: 5 Hp @220-240V, 10 Hp @ 440-600V
Hubbell Cord Grip Connector 90 Degree Elbow, ½" NPSM .500"-.625" Cord Diameter. Used On CASRE.
The manufacturer reserves the right to use alternate motors from
alternate vendors that meet the operating requirements of the fan
but may have slightly different specifications.
Wheel Assembly 15 3/4" Dia. Top. X 11 5/8" Dia. Ins. Bottom X 7 19/32" High. Uses 6" Ø B Hub with H Bushings. *Requires H type split taper bushing if ordered as a replacement part.
Motor Speed Control for EC motors. For use with Nidec and Telco EC motors.
Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins.
Part replaces: ECM-VCU-RTC. **Controller needs initial programming before shipping from the factory.**
Motor Speed Control for EC motors. For use with Nidec and Telco EC motors.
Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins.
Part replaces: ECM-VCU-RTC. **Controller needs initial programming before shipping from the factory.**
Motor Speed Control for EC motors. For use with Nidec and Telco EC motors.
Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins.
Part replaces: ECM-VCU-RTC. **Controller needs initial programming before shipping from the factory.**
Motor Speed Control for EC motors. For use with Nidec and Telco EC motors.
Uses 0 to 100% speed reference with rpm indication. 24VAC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins.
Part replaces EVO/ECM-VCU-36-MP and EVO/ECM-ACU+S1.1-MP.
Turn-tite Low-Pressure Mechanical Test Plug Steel W/Neoprene Seal, for Pipe ID 3.75". Used for Upblast Fan Wheel Access. - Cut Hole with McMaster Carr Hole Saw 4066A54 With Pilot Bit 4066A79.
Miami Dade Impact and Wind Load Certification +100 / -100 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof Mount Exhaust Curbs up to 20" high must be 18 gauge Aluminized.
High Temperature Heat & Smoke Option - RE15 Direct Drive High Temperature Steel Wheel and Wiring Package. High Temperature Liquid Tight Conduit, Part Number ATX050TB. High Temperature Wire, Type MG only. High Temperature Crimp Connections & Class H Insulating Tape Part Number 76455A27. 12 & 10 Ga Splice Number 7227K34. 8 Ga Splice Number 7227K35. 6 Ga Splice 7227K36. High temp conduit fittings.
CONDUIT - 1/2" High Temperature (Price per Foot) - Liquid Tight Flexible Metallic Conduit, Extreme Temperature Range, Galvanised Steel Core with TPR Jacket, Conduit Size 1/2 Inch, Length 30 Meters/100 Feet, Working Temperature -60 to 150 Degrees C, Intermitting to 165 Degrees C, Compliant to RoHS and WEEE, Black
Steel Wheel Assembly 15 3/4" Dia. Top. X 11 5/8" Dia. Ins. Bottom X 7 19/32" High. Uses 6" Ø B Hub with H Bushings. *Requires H type split taper bushing if ordered as a replacement part.
Wheel Assembly 15 3/4" Dia. Top. X 11 5/8" Dia. Ins. Bottom X 7 19/32" High. Uses 6" Ø B Hub with H Bushings. *Requires H type split taper bushing if ordered as a replacement part.
R-10480-S, 3/8" Thick soft closed-cell, low compression set silicone sponge. Backing is 3 M™ Adhesive 3M9473 PSA 1 side ideal for very high-bond strength to many surfaces. Used on CASRE top plate. 1 Roll = 35" Long.
R-10480-S, 3/8" Thick soft closed-cell, low compression set silicone sponge. Backing is 3 M™ Adhesive 3M9473 PSA 1 side ideal for very high-bond strength to many surfaces. Used on CASRE top plate. 1 Roll = 35" Long.
VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive.
Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
