Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

TUSBI30DD-RM-S Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP7/56 7.5 3 208-230/460 V 22.3-20.2/10.1 1.625" 254T 170 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00712OT3H254T-S 7.5 3 575 V 8.1 1.625" 254T 186 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00712OT3E254T-W40 7.5 3 208-230/460 V 22-19.9/9.9 1.625" 254T 214 lbs 1180 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP0106 10 3 208-230/460 V 28.4-25.7/12.9 1.625" 256T 234 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

01012OT3H256T-S 10 3 575 V 11.1 1.625" 256T 214 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

01518OT3H254T-S 15 3 575 V 14.9 1.625" 254T 175 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

02018OT3H256T-S 20 3 575 V 20 1.625" 256T 198 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP0204 20 3 208-230/460 V 53.7-48.6/24.3 1.625" 256T 269 lbs 1770 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00509ET3E254T-W22-50 4 3 190/380 V 15.5/7.8 1.625" 254T 284 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00709ET3E256T-W22-50 5 3 190/380 V 19.3/9.7 1.625" 256T 313 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00509ET3E254T-W22 5 3 208-230/460 V 16.8-15.2/7.6 1.625" 254T 284 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP0056 5 3 208-230/460 V 15.6-14/7 1.375" 215T 164 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-3/8KW5/16	1-3/8" "Q1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
MTRADP254T-213T	Motor Adapter Assembly for using 213T frame motors on USBI24-30DD, SIF24-30DD.
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00512ET3H215T-W22 5 3 575 V 5.5 1.375" 215T 180 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-3/8KW5/16	1-3/8" "Q1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
MTRADP254T-213T	Motor Adapter Assembly for using 213T frame motors on USBI24-30DD, SIF24-30DD.
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00512ET3E215T-W22 5 3 208-230/460 V 15.2-13.7/6.9 1.375" 215T 172 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-3/8KW5/16	1-3/8" "Q1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
MTRADPBASE254T-213T	Motor Adapter Base plate for MTRADP254T-213T.
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00712ET3H254T-W22 7.5 3 575 V 7.6 1.625" 254T 316 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00709ET3E256T-W22 7.5 3 208-230/460 V 24.5-22.2/11.1 1.625" 256T 313 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP7/56 7.5 3 208-230/460 V 21.1-19.1/9.6 1.625" 254T 267 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP7/56-50 7.5 3 190/380 V 22.4/11.2 1.625" 254T 267 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP0106-50 10 3 190/380 V 29.6/14.8 1.625" 256T 311 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

01012ET3H256T-W22 10 3 575 V 10.3 1.625" 256T 325 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP0106 10 3 208-230/460 V 28.3-25.6/12.8 1.625" 256T 311 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

01518ET3H254T-W22 15 3 575 V 14.4 1.625" 254T 347 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

02018ET3H256T-W22 20 3 575 V 19.3 1.625" 256T 396 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP0204 20 3 190/208-230/380/460 V 55.7/50.8-46/27.8/23 1.625" 256T 287 lbs 1760 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP0204-50 20 3 190/380 V 56.6/28.3 1.625" 256T 287 lbs 1460 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

Q1-1-5/8	1-5/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800043 [4 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800032 [4 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
0120763.0800 [20 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
92323A558 [40 used]	Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
11626-03224 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
P-50-1010 [3 used]	Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.
MANUAL EXHAUST [1 used]	Manual for PRVs
99904A104 [8 used]	Nut Whiz - Zinc-Plated Steel Serrated-Flange Hex Locknut 1/2"-13 Thread Size, 3/4" W, 29/64" O'all Height. Grade 5.
SB6-4-RIVET [20 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
0125617 [8 used]	Rivsert - 1/4" - 20 Rivet Insert Used On USBI - 95105A143 - Product Detail Zinc-Plated Steel Heavy-Duty Rivet Nut, Open End, 1/4"-20 Interior Thread,.027"-.165" Material Thickness
104778 [1 used]	SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
800115 [1 used]	Shaft Key USBI 3/8" X 3/8" X 2" Long, Steel
SSPI-08-06-RIVET [150 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
F8010030Q1-T-S [1 used]	Steel Wheel Assembly 30 7/8" Dai. Top X 21 1/16" Dia. Ins. Bottom X 11 7/8" High. Uses 15" Ø T Hub with Q1 Bushings. *Requires Q1 type split taper bushing if ordered as a replacement part.
USBILGACCESSDF [1 used]	USBI Access Door Large
USBI-30DD-RM-KIT [1 used]	USBI-30DD-RM-KIT - Used On USBI-30DD. Sheet Metal Components Used To Build Direct Driven Shell.

Curbs

Part
RAILS-BI20-27 4H( Set of 2 )	RAIL - 60" Long X 4" Wide X 4" High. Comes as a set of 2.
RAILS-BI20-27-USBI-24-30 6H( Set of 2 )	RAIL - 60" Long X 4" Wide X 6" High. Comes as a set of 2.
RAILS-BI20-27 7.5H( Set of 2 )	RAIL - 60" Long X 4" Wide X 7.5" High. Comes as a set of 2.
RAILS-BI20-27-USBI-24-30 10H( Set of 2 )	RAIL - 60" Long X 4" Wide X 10" High. Comes as a set of 2.
RAILS-BI20-27 12H( Set of 2 )	RAIL - 60" Long X 4" Wide X 12" High. Comes as a set of 2.
RAILS-BI20-27 14H( Set of 2 )	RAIL - 60" Long X 4" Wide X 14" High. Comes as a set of 2.
RAILS-BI20-27 16H( Set of 2 )	RAIL - 60" Long X 4" Wide X 16" High. Comes as a set of 2.
RAILS-BI20-27 18H( Set of 2 )	RAIL - 60" Long X 4" Wide X 18" High. Comes as a set of 2.
RAILS-BI20-27 20H( Set of 2 )	RAIL - 60" Long X 4" Wide X 20" High. Comes as a set of 2.
RAILS-BI20-27 24H( Set of 2 )	RAIL - 60" Long X 4" Wide X 24" High. Comes as a set of 2.
RAILS-BI20-27 30H( Set of 2 )	RAIL - 60" Long X 4" Wide X 30" High. Comes as a set of 2.

Options

Part
24SERVICEDUCTKIT	24" Diameter Duct - 24" Diameter Service Duct Used For Quick Disconnect From Fan Inlets & Duct Runs. Service Duct Kits Include (2) DW2407LT, (8) DW24RERI2PCS, Hardware, & 3M Fire Barrier 2000 Plus Sealant.
Show parts
	DW24RERI2PCS [8 used]	2 Piece Duct Riser Retaining Ring, 24" Duct, Used on field installations. 12 GA Steel, Clear Zinc Coating. 1 Piece Per Part Number, 2 Pieces Required Per Assembly.
	800034 [16 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [16 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	3M-2000PLUS [1 used]	Duct - 3M Fire Barrier 2000 Plus Silicone - Used as sealant to Seal Duct Joints.
GCUP-Utility Set	Grease Cup for Utility Sets. Option for Utility Sets.
Show parts
	LNS200 [2 used]	2" Conduit Locknut
	6130001 [1 used]	Grease Cup for Utility Sets
HT-BI-S	High Temperature Heat & Smoke Option - BI 24-S, 30-S, 36-S Models. High Temperature Wiring Package. High Temperature Liquid Tight Conduit, Part Number ATX050TB. High Temperature Wire, Type MG only. High Temperature Crimp Connections & Class H Insulating Tape Part Number 76455A27. 12 & 10 Ga Splice Number 7227K34. 8 Ga Splice Number 7227K35. 6 Ga Splice 7227K36. High temp conduit fittings.
Show parts
	ATX050TB [5 used]	CONDUIT - 1/2" High Temperature (Price per Foot) - Liquid Tight Flexible Metallic Conduit, Extreme Temperature Range, Galvanised Steel Core with TPR Jacket, Conduit Size 1/2 Inch, Length 30 Meters/100 Feet, Working Temperature -60 to 150 Degrees C, Intermitting to 165 Degrees C, Compliant to RoHS and WEEE, Black
DISCONNECTSIDE-BI	Mount Disconnect Switch On Left Side Of The Motor Cover - When Viewed From Motor Cover Side - BI 24, 30 & 36 Only.
MIAMI-DADE NOA-2 BI Curb Sled Utility Set	Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof Mount Exhaust Curbs up to 24" high must be 18 gauge Aluminized. Follow Installation Instructions listed in NOA-2.
MIAMI-DADE NOA-2 BI Utility Set	Miami Dade Impact and Wind Load Certification +112.5 / -112.5 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof Mount Exhaust Rails up to 10" high must be 18 gauge Aluminized.
Dry Mode Exhaust	Current Sensor Mounted In Exhaust Fan For Use With Pool Room Temp Control
Show parts
	A/MCS-A [1 used]	Current Sensor - Solid Core, AC Current Range: 0.32 - 150A , NO Contact w/ Max Rating of 1A @ 36VAC/VDC
Shaft Grounding Ring Option	Shaft Grounding Ring Option
Full Crating for Exhaust Fan	Full crating for exhaust fans for shipping.
EPO30-USBI-Enamel	Tan Enamel Coating For 30" USBI Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
FIRESTAT-EXH-600	Fire stat option for Exhaust fans (600 degree fire stat).
Show parts
	IHD3-1 [1 used]	Deep Junction Box 2 3/4" X 4 1/2" X 2 1/2".
	12-H28021-005-0T-600 [1 used]	Duct Fire Thermostat. NO, Close on temp rise at 600°F.
	171 [1 used]	QUIK SEAL - Quick Seal 1/2"
CRVX1831	BACKDRAFT DAMPER - CRVX 18.125" Wide x 31.125" High - for BI30 Utility Set, don't use with UL762.
BI30EXTASY	BI30 - 24" High Discharge Extension Assembly.
Show parts
	SB6-4-RIVET [10 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	104778 [1 used]	SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
BI30SCREEN	BI30 Discharge Screen.
BI30RAINCAPASY	BI30 - Rain Cap Assembly.
Show parts
	CASRERNCAPBKSUPMD [4 used]	Rain Cap Back Support Medium. Used on CASRE18-24 and USBI18-30
	SB6-4-RIVET [30 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
BI-ORIENTATION-HLL	BI - Discharge Orientation - Horizontal Lower Left - CW Looking At Inlet.
BI-ORIENTATION-HUR	BI - Discharge Orientation - Horrizontal Upper Right - CW Looking At Inlet.
BI-ORIENTATION-UL45	BI - Discharge Orientation - Upper Left 45 degree - CW Looking At Inlet.
BI-ORIENTATION-UR45	BI - Discharge Orientation - Upper Right 45 degree - CW Looking At Inlet.
BI-ORIENTATION-VUL	BI - Discharge Orientation - Vertical Upper Left - CW Looking At Inlet.
BI30-DW24FRISER	BI30 - 24" Flanged Grease Duct Connection.
Show parts
	DW24RERIUSBI302PCS [2 used]	2 Piece Duct Riser Retaining Ring, 24" Duct, Used on USBI30BD, BDHP & DD. 12 GA Steel, Clear Zinc Coating. 1 Piece Per Part Number, 2 Pieces Required Per Assembly.
BI30INRING	BI30 - Inlet Ring.
T44-5A-8	Rubber Vibration Isolators for Utility Set Exhaust Fans (set of 8). Option for the BI Utility Set.
Show parts
	T44-5A [8 used]	Vibration Isolators for Utility Set Exhaust Fans and PCU blowers. Option for the BI-RM Utility Set. (Sold separately.) (5079) (T44-5A)
T44-7A-6	Green Rubber Vibration Isolators for Utility Set Exhaust Fans (set of 6). Option for the Utility Set.
Show parts
	T44-7A [6 used]	Vibration Isolators for PCU USBI and SIF fans. (Sold separately.) (T44-7A) Green in Color
5C128-6	Floor Mount Spring Vibration Isolators. Option for the BI27 thru BI30, USBI24 & USBI30 (6 required) Utility Set units. Max Weight = 200 lbs. 1.2" Deflection. 3/8" bolt diameter. (5C128 X 6). "Black" (5C128) - Mason C-A-200.
Show parts
	5C128 [6 used]	Floor Mount Spring Vibration Isolators. Option for the BI27 (6 required) thru BI30 (6 required) Utility Set and MUA units. Max Weight = 200 lbs. 1.2" Deflection. 3/8" bolt diameter. (Sold separately for inddor/outside use). "Black" (5C128) - Mason C-A-200.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.