Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

TH-SIF11DD-SS Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

BMN48-375I1-ES-M52-CA-50-115 0.5 1 115 V 6.3 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
SIF1135DDDBCVR1-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with single phase motors.
810022	Green Ground Screw
SIF1135DDMTRCVRFFM-SS	Motor Cover Front (Stainless Steel) used on SIF11-15DD-SS with face mounted motors (48 frame).
SIF1135DDMTRCVRFCFM-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS with face mounted motors
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-SIF-T	Wiring Harness for Telco EC motors used on SIF11-15DD. Connects power to speed control and transformer.

BMN48-375I2-ES-M52-CA-50-230/277 0.5 1 220-230-277 V 3.7-3.5-2.9 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
SIF1135DDDBCVR1-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with single phase motors.
810022	Green Ground Screw
SIF1135DDMTRCVRFFM-SS	Motor Cover Front (Stainless Steel) used on SIF11-15DD-SS with face mounted motors (48 frame).
SIF1135DDMTRCVRFCFM-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS with face mounted motors
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-SIF-T	Wiring Harness for Telco EC motors used on SIF11-15DD. Connects power to speed control and transformer.

BMN48-375I1-ES-M52-CA-60-115 0.5 1 115 V 6.3 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
SIF1135DDDBCVR1-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with single phase motors.
810022	Green Ground Screw
SIF1135DDMTRCVRFFM-SS	Motor Cover Front (Stainless Steel) used on SIF11-15DD-SS with face mounted motors (48 frame).
SIF1135DDMTRCVRFCFM-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS with face mounted motors
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-SIF-T	Wiring Harness for Telco EC motors used on SIF11-15DD. Connects power to speed control and transformer.

BMN48-375I2-ES-M52-CA-60-230/277 0.5 1 208-220-230-277 V 3.8-3.5-3.5-2.9 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
SIF1135DDDBCVR1-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with single phase motors.
810022	Green Ground Screw
SIF1135DDMTRCVRFFM-SS	Motor Cover Front (Stainless Steel) used on SIF11-15DD-SS with face mounted motors (48 frame).
SIF1135DDMTRCVRFCFM-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS with face mounted motors
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-SIF-T	Wiring Harness for Telco EC motors used on SIF11-15DD. Connects power to speed control and transformer.

GP0014 1 3 200-208-230/400/460 V 2.9-3-2.7/1.4/1.3 0.875" L143T 36 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
8002A	CONDUIT CONNECTORS - Straight 1/2" Liquid Tite - LT201
SIF1135DDDBCVR3-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with three phase motors.
SIF1135DDMTRCVRFC-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS
SIF1135DDMTRCVRFL-SS	Motor Cover Front Left (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRCVRFR-SS	Motor Cover Front Right (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRSP-SS	Motor Seat Plate (Stainless Steel) for direct drive Square Inline Fan with 11", 13", or 15" wheels.

GP0014-50 1 3 190/380/400 V 3.2/1.6/1.5 0.875" L143T 36 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
8002A	CONDUIT CONNECTORS - Straight 1/2" Liquid Tite - LT201
SIF1135DDDBCVR3-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with three phase motors.
SIF1135DDMTRCVRFC-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS
SIF1135DDMTRCVRFL-SS	Motor Cover Front Left (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRCVRFR-SS	Motor Cover Front Right (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRSP-SS	Motor Seat Plate (Stainless Steel) for direct drive Square Inline Fan with 11", 13", or 15" wheels.

GP1/54 1.5 3 190/200-208-230/380/400/460 V 4.3/4.3-4.5-4/2.1/2.1/2.1 0.875" 145T 40 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
8002A	CONDUIT CONNECTORS - Straight 1/2" Liquid Tite - LT201
SIF1135DDDBCVR3-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with three phase motors.
SIF1135DDMTRCVRFC-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS
SIF1135DDMTRCVRFL-SS	Motor Cover Front Left (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRCVRFR-SS	Motor Cover Front Right (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRSP-SS	Motor Seat Plate (Stainless Steel) for direct drive Square Inline Fan with 11", 13", or 15" wheels.

GP1/54-50 1.5 3 190/380 V 4.8/2.4 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
8002A	CONDUIT CONNECTORS - Straight 1/2" Liquid Tite - LT201
SIF1135DDDBCVR3-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with three phase motors.
SIF1135DDMTRCVRFC-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS
SIF1135DDMTRCVRFL-SS	Motor Cover Front Left (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRCVRFR-SS	Motor Cover Front Right (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRSP-SS	Motor Seat Plate (Stainless Steel) for direct drive Square Inline Fan with 11", 13", or 15" wheels.

GP0022 2 3 208-230/460 V 5.4-4.9/2.5 0.875" 145T 36 lbs 3600 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

SOOW-123	12/3 SOOW Cord - OD .605 - 600V Single Phase Applications. Price per foot.
H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
8002A	CONDUIT CONNECTORS - Straight 1/2" Liquid Tite - LT201
SIF1135DDDBCVR3-SS	Disconect Box Cover (Stainless Steel) used on SIF11-15DD-SS with three phase motors.
SIF1135DDMTRCVRFC-SS	Motor Cover Front Corner (Stainless Steel) used on SIF11-15DD-SS
SIF1135DDMTRCVRFL-SS	Motor Cover Front Left (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRCVRFR-SS	Motor Cover Front Right (Stainless Steel) used on SIF11-15DD-SS with base mounted motors.
SIF1135DDMTRSP-SS	Motor Seat Plate (Stainless Steel) for direct drive Square Inline Fan with 11", 13", or 15" wheels.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
11355T28 [1 used]	1 1/8" Vibration Dampening Routing Clamp
800026 [8 used]	A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc
SIF11ADRLNR-SS [2 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
SIF11BASEDD-SS [1 used]	Base (Stainless Steel) for Direct Drive Square Inline Fan with 11" wheel.
A7-10-351-20 [4 used]	Black Compression Handle Latch and Clasp
800040 [8 used]	BOLT 1/4-20 X 1-1/2 WHIZ CASE HARDENED AND SERRATED Fastenal(60058)
11626-03227 [6 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 12 gauge material.
11626-03224 [8 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
7753K129 [1 used]	CASRE Scoop Drain - 2" NPT X 1.75" Pipe.
F2140030 [2 used]	Cooling Tube 3 1/2" Out. Dia. X 9" Long, .080 Wall Thk. Extruded Alum. For BDU30 / BDU30HP (620197)
F2100001 [4 used]	Cooling Tube Grommet 3 1/2" Ins. Dia., 4 1/2" Out. Dia., 3/8" Thk., Black Silicone Rubber(620047)
SIF11CP-SS [1 used]	Corner Post (Stainless Steel) for Square Inline Fan with 11" wheel.
SIF11CPOR-SS [1 used]	Corner Post Opposite Rear (Stainless Steel) for Square Inline Fan with 11" wheel.
SIF11CPO-SS [1 used]	Corner Post Opposite Side (Stainless Steel) for Square Inline Fan with 11" wheel.
SIF11CPR-SS [1 used]	Corner Post Rear (Stainless Steel) for Square Inline Fan with 11" wheel.
SIFCRNRS [4 used]	Corner Support for wall/ ceiling mounting Square Inline Fan Sizes 11-36.
SIFCRNRTO [2 used]	Corner Triangle Opposite Support for wall/ ceiling mounting Square Inline Fan.
SIFCRNRT [2 used]	Corner Triangle Support for wall/ ceiling mounting Square Inline Fan.
SIF11FIP-SS [1 used]	Front Inlet Panel (Stainless Steel) for Square Inline Fan with 11" wheel.
397-91PSA-Foot [20 used]	Gasketing - Thermeez Woven Ceramic Tape - 1/4" x 1" with adhesive back - Max Temp 1500°F. To be applied between fan base and grease duct. Per Foot.
P-50-1010 [2 used]	Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.
SIF11DDHTCHNLR-SS [2 used]	Hat Channel R (Stainless Steel) for Square Inline Fan with 11" wheel.
2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
SIF1135DDMTRCVRB-SS [1 used]	Motor Cover Back used on SIF11-15DD-SS.
SIF113DDMTRCVRD-SS [2 used]	Motor Cover Door (Stainless Steel) used on SIF11-13DD-SS.
SIF11DDMTRCVRT-SS [1 used]	Motor Cover Top (Stainless Steel) for direct drive Square Inline Fan with 11" wheel.
SIF11DDMTRPLTBASE-SS [1 used]	Motor Plate Base (Stainless Steel) for direct drive Square Inline Fan with 11" wheel.
SIF11DDMTRPLTLEG-SS [2 used]	Motor Plate Leg (Stainless Steel) for direct drive Square Inline Fan with 11" wheel.
SIF11RCGUS-SS [4 used]	Rear Corner Gusset (Stainless Steel) for Square Inline Fan with 11" wheel.
HG-OTA100 [4 used]	Removable Door Hinge used on Pollution Control Units and KB Blowers
SB6-4-RIVET [24 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
SIF1118HTCHNLS-SS [1 used]	Shortened Hat Channel used for SIF11-18 UL762 SIFs
SIF1120CTB-SS [1 used]	SIF 11-20 Cooling Tube Compartment Bottom- used on SS version
SIF1120CTT-SS [1 used]	SIF 11-20 Cooling Tube Compartment Top- used on SS verison
SIF11ADRS-SS [2 used]	Stainless Steel Access Door for Square Inline Fan with 11" wheel. Used on SIF11DD-SS & SIF11DD-HESS-UL762 units.
SIF11DDTOP-SS [1 used]	Top (Stainless Steel) for direct drive Square Inline Fan with 11" wheel.
F5020011MUSBI [1 used]	USBI11 - Spun Inlet.
F8010011H-B [1 used]	Wheel Assembly 11 3/4" Dia. Top X 8 3/8" Dia. Ins. Bottom X 6 5/16" High. Uses 5" Ø B Hub with H Bushings. *Requires H type split taper bushing if ordered as a replacement part.
90272A835 [16 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/4" Length
90272A829 [8 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length

Options

Part
ECM Wiring Package - MSC	ECM Wiring Package - Exhaust - Manual or 0-10VDC Reference Speed Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
MSC w/ 10KLVC-DB	ECM Wiring Package - Exhaust - Manual Potentiometer Speed Control -MSC-
Show parts
	10KLVC-DB [1 used]	10K OHM POTENTIOMETER WITH INTEGRATED WALL PLATE.
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC - MODBUS	ECM Wiring Package - Exhaust - MODBUS Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package-RTC	ECM Wiring Package - Manual or 0-10VDC Reference Speed Control -RTC- (TELCO Motor), CCW Rotation
Show parts
	ECM-VCU-RTC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% speed reference with rpm indication. 24VAC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces EVO/ECM-VCU-36-MP and EVO/ECM-ACU+S1.1-MP.
ECM Wiring Package-ECPM03	ECM Wiring Package - PWM Signal from ECPMO3 Prewire (TELCO Motor), CCW Rotation
I 15 BDD w/ 120/240V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 120/240V
Show parts
	MTR-611 [1 used]	120/240 v Motor Pack for I Series Backdraft Dampers
	I 15 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
I 15 BDD w/ 24V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 24V
Show parts
	MTR-611 24V [1 used]	24 V Motor Pack for I Series Backdraft Dampers
	I 15 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
I 15 BDD w/ 460V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 460V
Show parts
	MTR-611-460 [1 used]	460 v Motor Pack for I Series Backdraft Dampers
	I 15 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
HSA125-4	Hanging Vibration Isolators for Square Inline Fans. Contains four HSA125 Hanging Isolators.
Show parts
	HSA125 [4 used]	Isolation spring with 125lbs resistance, 1.33" rated deflection, for hanging installation. Color, Brown
I 15 BDD	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
Dry Mode Exhaust	Current Sensor Mounted In Exhaust Fan For Use With Pool Room Temp Control
Show parts
	A/MCS-A [1 used]	Current Sensor - Solid Core, AC Current Range: 0.32 - 150A , NO Contact w/ Max Rating of 1A @ 36VAC/VDC
Shaft Grounding Ring Option	Shaft Grounding Ring Option
Full Crating for Exhaust Fan	Full crating for exhaust fans for shipping.
SIF11SD-Straight-Square	SIF11 with straight discharge. Square Duct Connection.
SIF11SD-Left-Ring-SS	Side Discharge door (Stainless Steel) for SIF 11. Left side from inlet. Outlet Ring Duct Connection.
Show parts
	SIF11ADR-SS [-1 used]	Access Door (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11ADRLNR-SS [-1 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11DB-SS [1 used]	Discharge Block (Stainless Steel) used on the SIF11.
	SIF11SDD-SS [1 used]	Side Discharge Door (Stainless Steel) for SIF11
	SIF11SDF-SS [4 used]	Side Discharge Flange (Stainless Steel) for SIF11
	SIF11SDS-SS [2 used]	Side Discharge Spacer (Stainless Steel) for SIF11
	SIF11DA-OUTRING-SS [1 used]	SIF 11 Discharge Adapter (Stainless Steel) to non-factory Duct
SIF11SD-Left-Square-SS	Side Discharge door (Stainless Steel) for SIF 11. Left side from inlet. Square Duct Connection.
Show parts
	SIF11ADR-SS [-1 used]	Access Door (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11ADRLNR-SS [-1 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11DB-SS [1 used]	Discharge Block (Stainless Steel) used on the SIF11.
	SIF11SDD-SS [1 used]	Side Discharge Door (Stainless Steel) for SIF11
	SIF11SDF-SS [4 used]	Side Discharge Flange (Stainless Steel) for SIF11
	SIF11SDS-SS [2 used]	Side Discharge Spacer (Stainless Steel) for SIF11
SIF11SD-Left-DW12FRISER-SS	Side Discharge door (Stainless Steel) for SIF 11. Left side from inlet. Standard 12" Duct Connection.
Show parts
	SIF11ADR-SS [-1 used]	Access Door (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11ADRLNR-SS [-1 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11DB-SS [1 used]	Discharge Block (Stainless Steel) used on the SIF11.
	SIF11SDD-SS [1 used]	Side Discharge Door (Stainless Steel) for SIF11
	SIF11SDF-SS [4 used]	Side Discharge Flange (Stainless Steel) for SIF11
	SIF11SDS-SS [2 used]	Side Discharge Spacer (Stainless Steel) for SIF11
	SIF11DA-DW12-SS [1 used]	SIF 11 Discharge Adapter (Stainless Steel) to Standard 12" Flanged Duct.
SIF11SD-Right-Ring-SS	Side Discharge door (Stainless Steel) for SIF 11. Right side from inlet. Outlet Ring Duct Connection.
Show parts
	SIF11ADR-SS [-1 used]	Access Door (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11ADRLNR-SS [-1 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11DB-SS [1 used]	Discharge Block (Stainless Steel) used on the SIF11.
	SIF11SDD-SS [1 used]	Side Discharge Door (Stainless Steel) for SIF11
	SIF11SDF-SS [4 used]	Side Discharge Flange (Stainless Steel) for SIF11
	SIF11SDS-SS [2 used]	Side Discharge Spacer (Stainless Steel) for SIF11
	SIF11DA-OUTRING-SS [1 used]	SIF 11 Discharge Adapter (Stainless Steel) to non-factory Duct
SIF11SD-Right-Square-SS	Side Discharge door (Stainless Steel) for SIF 11. Right side from inlet. Square Duct Connection.
Show parts
	SIF11ADR-SS [-1 used]	Access Door (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11ADRLNR-SS [-1 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11DB-SS [1 used]	Discharge Block (Stainless Steel) used on the SIF11.
	SIF11SDD-SS [1 used]	Side Discharge Door (Stainless Steel) for SIF11
	SIF11SDF-SS [4 used]	Side Discharge Flange (Stainless Steel) for SIF11
	SIF11SDS [2 used]	Side Discharge Spacer for SIF11
SIF11SD-Right-DW12FRISER-SS	Side Discharge door (Stainless Steel) for SIF 11. Right side from inlet. Standard 12" Duct Connection.
Show parts
	SIF11ADR-SS [-1 used]	Access Door (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11ADRLNR-SS [-1 used]	Access Door Liner (Stainless Steel) for Square Inline Fan with 11" wheel.
	SIF11DB-SS [1 used]	Discharge Block (Stainless Steel) used on the SIF11.
	SIF11SDD-SS [1 used]	Side Discharge Door (Stainless Steel) for SIF11
	SIF11SDF-SS [4 used]	Side Discharge Flange (Stainless Steel) for SIF11
	SIF11SDS-SS [2 used]	Side Discharge Spacer (Stainless Steel) for SIF11
	SIF11DA-DW12-SS [1 used]	SIF 11 Discharge Adapter (Stainless Steel) to Standard 12" Flanged Duct.
SIF11SD-Straight-Ring-SS	SIF11 with straight discharge (Stainless Steel). Outlet Ring Duct Connection.
Show parts
	SIF11DA-OUTRING-SS [1 used]	SIF 11 Discharge Adapter (Stainless Steel) to non-factory Duct
SIF11SD-Straight-DW12FRISER-SS	SIF11 with straight discharge (Stainless Steel). Standard 12" Duct Connection.
Show parts
	SIF11DA-DW12-SS [1 used]	SIF 11 Discharge Adapter (Stainless Steel) to Standard 12" Flanged Duct.
SIF11DSO-SS	Discharge Screen (Stainless Steel) used on the SIF11.
Show parts
	SIF11DS-SS [1 used]	Discharge Screen (Stainless Steel) used on the SIF11.
SIF11ISO-SS	Inlet Screen Option (Stainless Steel) used on the SIF11.
Show parts
	SIF11IS-SS [1 used]	Inlet Screen (Stainless Steel) used on the SIF11.
SIF11SD-Inlet-Square	SIF11 - Square Duct Inlet Connection.
SIF11SD-Inlet-DW12FRISER	SIF11 Standard 12" Duct Inlet Connection.
Show parts
	800034 [8 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	BI11-DW12FRISER [1 used]	BI11 - 12" Flanged Grease Duct Connection.
SIF11SD-Inlet-Ring	SIF11 - Inlet Ring Duct Connection.
Show parts
	SIF11-INRING [1 used]	SIF 11 Inlet Adapter to non-factory Duct
SIF-Mount-Bottom	SIF - Horizontal Floor Pre-Installed Mounts (Used on Sizes 11-36).
SIF-Mount-Top	SIF - Horizontal Overhead Pre-Installed Mounts (Used on sizes 11-36).
Show parts
	SIFCRNRS [4 used]	Corner Support for wall/ ceiling mounting Square Inline Fan Sizes 11-36.
	SIFCRNRTO [4 used]	Corner Triangle Opposite Support for wall/ ceiling mounting Square Inline Fan.
	SIFCRNRT [4 used]	Corner Triangle Support for wall/ ceiling mounting Square Inline Fan.
SIF-Mount-Loose	SIF - Mounting Brackets Shipped Loose (Used on Sizes 11-36).
Show parts
	SIFCRNRS [4 used]	Corner Support for wall/ ceiling mounting Square Inline Fan Sizes 11-36.
	SIFCRNRTO [2 used]	Corner Triangle Opposite Support for wall/ ceiling mounting Square Inline Fan.
	SIFCRNRT [2 used]	Corner Triangle Support for wall/ ceiling mounting Square Inline Fan.
5C126-4	Floor Mount Spring Vibration Isolators. Option for the BI10, USBI11, USBI13 & USBI15 (4 required) Utility Set units and SIF11-18 (4 required). Max Weight = 75 lbs. 1.3" Deflection. 3/8" bolt diameter. Set of 4. "Orange" (5C126x4) Grainger equivalent = 5C126 - Mason C-A-75.
Show parts
	5C126 [4 used]	Floor Mount Spring Vibration Isolators. Option for the BI10 and BI11 (4 required) thru BI18 (6 required) Utility Set and MUA units. Max Weight = 75 lbs. 1.3" Deflection. 3/8" bolt diameter. (Sold separately for inddor/outside use). "Orange" (5C126) - Mason C-A-75.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
SIF 11 Load Reactor	SIF 11 load reactor box assembly. Mounted on SIF VFD bracket.
Show parts
	90680A125 [4 used]	10-32 Cage Nut, 0.375" x 0.375" mounting hole. Zinc plated steel, right hand thread.
	800041 [4 used]	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	90064A430 [4 used]	CASRE Switch Enclosure Mounting Hardware - Zinc-Plated Steel Sheet Metal Screw. Size #10-16x1/2 length. 5/16 hex head.
	PCSIFVFD11 [1 used]	SIF disconnect and VFD mounting plate. Size 11.
	PCSIFLRBOX [1 used]	SIF load reactor box.
	PCSIFLRCAP [1 used]	SIF load reactor cap.
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.
PCSIFVFD11	SIF disconnect and VFD mounting plate. Size 11.
8860041-4	Rubber Vibration Floor Isolators for In-Line Exhaust Fans (set of 4). Option for the SQB10 thru SQB15. (5079)
Show parts
	T44-5A [4 used]	Vibration Isolators for Utility Set Exhaust Fans and PCU blowers. Option for the BI-RM Utility Set. (Sold separately.) (5079) (T44-5A)

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.