Sign In         Specifying Software      
 
    Home        About Us        Contact Us        Help Buy Online or Call 1-800-476-5888  
 
 
T-A1-G10 Parts
Motors, Pulleys, & Motor Specific Parts
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
CK48HB07J01-60HZ 0.333 1 115/208-230 V 5.8/3.2-2.9 0.500" 48 23 lbs 1735 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
CK48HB07J01-50HZ 0.333 1 220 V 3.3 0.500" 48 23 lbs 1435 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
CK48HB06H01-50HZ 0.500 1 220 V 4.3 0.625" 56 26 lbs 1435 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
.5018OT3E56-S48PP-50HZ 0.500 3 190/220/380/415 V 1.9/1.8/1/1 0.625" 56 20 lbs 1400 WEG
ODP (Open Drip Proof) Pulleys
Show parts
B608 0.500 1 277 V 3.6 0.625" 56 25 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
CK48HB06H01-60HZ 0.500 1 115/208-230 V 7.6/4.2-3.8 0.625" 56 26 lbs 1730 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
.5018OT3E56-S48PP 0.500 3 208-220-230/380/460 V 1.9-1.7-1.7/0.9/0.9 0.625" 56 20 lbs 1730 WEG
ODP (Open Drip Proof) Pulleys
Show parts
.7518OT3E56-S48PP 0.750 3 208-220-230/380/460 V 2.5-2.3-2.3/1.3/1.1 0.625" 56 24 lbs 1735 WEG
ODP (Open Drip Proof) Pulleys
Show parts
CK56HB02F01-60HZ 0.750 1 115/208-230 V 6/3.3-3 0.625" 56 34 lbs 1750 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
110396 0.750 1 220 V 5.9 0.625" E56 33 lbs 1425 Mimco/Leeson
ODP (Open Drip Proof) Pulleys
Show parts
.7518OT3E56-S48PP-50Hz 0.750 3 190/220-230/380/415 V 2.6/2.4-2.9/1.3/1.3 0.625" 56 29 lbs 1410 WEG
ODP (Open Drip Proof) Pulleys
Show parts
B609 0.750 1 277 V 4.3 0.625" 56 27 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
CK56HB02D01-50HZ 1.000 1 220 V 4.8 0.625" 56 34 lbs 1450 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
CK56HB02D01-60HZ 1.000 1 115/208-220-230 V 8.1/4.4-4.1-4 0.625" 56 39 lbs 1750 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
B337 1.000 1 277 V 5.6 0.625" 56 31 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
00118OT3E56-S48PP 1.000 3 208-220-230/380/460 V 3.4-3.9-3.1/1.9/1.5 0.625" 56 26 lbs 1720 WEG
ODP (Open Drip Proof) Pulleys
Show parts
00158OT3E56-S48PP 1.500 3 208-220-230/380/460 V 4.6-4.2-4.2/2.4/2.1 0.625" 56 31 lbs 1710 WEG
ODP (Open Drip Proof) Pulleys
Show parts
B338 1.500 1 277 V 7.5 0.625" 56H 38 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
00158OT3E56-S48PP-50HZ 1.500 3 190/220/380/415 V 5.1/4.8/2.5/2.5 0.625" 56 31 lbs 1430 WEG
ODP (Open Drip Proof) Pulleys
Show parts
00218OT3E56Z-S48PP-50HZ 1.500 3 190/220/380/415 V 6.5/5.7/3.2/3 0.875" 56HZ 40 lbs 1400 WEG
ODP (Open Drip Proof) Pulleys
Show parts
CK56HB02B01-60HZ 2.000 1 115/208-230 V 16.5/9.5-8.1 0.875" 56HZ 58 lbs 1750 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
00318OT3E56Z-S48PP-50HZ 2.000 3 190/220/380/415 V 6.9/6.7/3.4/3.5 0.875" 56 55 lbs 1410 WEG
ODP (Open Drip Proof) Pulleys
Show parts
00218OT3E56Z-S48PP 2.000 3 208-230/415/460 V 5.9-5.3/3/2.6 0.875" 56 40 lbs 1700 WEG
ODP (Open Drip Proof) Pulleys
Show parts
DS0/74-50 0.750 3 190/200/380/400 V 3/2.8/1.5/1.4 0.625" 56 23 lbs 1416 Mimco/TECO
ODP, EPAct (E-Plus) Eff. Pulleys
Show parts
DTP0014 1.000 3 208-230/460 V 3.1-2.8/1.4 0.875" 143 35 lbs 1750 Mimco/TECO
ODP, Premium (E-Plus3) Eff. Pulleys
Show parts
00118OT3H143T-S 1.000 3 575 V 1.2 0.875" 143T 34 lbs 1750 WEG
ODP, Premium (E-Plus3) Eff. Pulleys
Show parts
00158OT3H145T-S 1.500 3 575 V 1.6 0.875" 145T 42 lbs 1750 WEG
ODP, Premium (E-Plus3) Eff. Pulleys
Show parts
DTP1/54 1.500 3 190/208-230/380/460 V 4.6/4.4-4/2.3/2 0.875" 145 46 lbs 1750 Mimco/TECO
ODP, Premium (E-Plus3) Eff. Pulleys
Show parts
DTP0024 2.000 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO
ODP, Premium (E-Plus3) Eff. Pulleys
Show parts
00218OT3H145T-S 2.000 3 575 V 2.1 0.875" 145T 39 lbs 1750 WEG
ODP, Premium (E-Plus3) Eff. Pulleys
Show parts
00158XT3E145T 1.500 3 208-230/460 V 4.4-4/2 0.875" 145T 75 lbs 1760 WEG
Explosion Proof Pulleys
Show parts
C223 0.333 1 115/208-230 V 5.2/2.6-2.5 0.625" 56 18 lbs 1725 PRECISION ELECTRIC MOTOR SALES
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
H868L 0.500 3 208-230/460 V 1.8-1.6/0.9 0.625" 56 18 lbs 1800 Regal Beloit/A.O. Smith
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
110064 0.500 1 110/220 V 8.2/4.1 0.625" 56H 28 lbs 1500 Mimco/Leeson
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
H869L 0.750 3 208-230/460 V 2.4-2.4/1.2 0.625" 56 20 lbs 1800 Regal Beloit/A.O. Smith
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
110066 1.000 1 110/220 V 12.8/6.4 0.625" 56H 41 lbs 1500 Mimco/Leeson
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
113911 1.000 1 110/220 V 12.8/6.4 0.625" 56 34 lbs 1500 Mimco/Leeson
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
114888 1.000 3 220/380 V 3.5/2 0.625" 56 31 lbs 1500 Mimco/Leeson
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
121093 1.500 3 220/380 V 5.8/3.3 0.875" 145T 36 lbs 1500 Mimco/Leeson
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
131509 2.000 1 115/208-230 V 24.8/13-12.4 1.125" 182T 75 lbs 1740 Leeson/Rempfer & Assoc.
TEFC (Totally Enclosed Fan Cooled) Pulleys
Show parts
GP0014-50 1.000 3 190/380/400 V 3.2/1.6/1.5 0.875" L143T 36 lbs 1440 Mimco/TECO
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts
GP0014 1.000 3 200-208-230/400/460 V 2.9-3-2.7/1.4/1.3 0.875" L143T 36 lbs 1800 Mimco/TECO
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts
00118ET3H143T-W22 1.000 3 575 V 1.2 0.875" 143T 48 lbs 1750 WEG
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts
00158ET3H145T-W22 1.500 3 575 V 1.6 0.875" 145T 53 lbs 1750 WEG
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts
GP1/54 1.500 3 190/200-208-230/380/400/460 V 4.3/4.3-4.5-4/2.1/2.1/2.1 0.875" 145T 40 lbs 1800 Mimco/TECO
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts
GP0024 2.000 3 190/200-208-230/380/400/460 V 6/5.9-5.7-5.2/3/2.9/2.6 0.875" 145T 40 lbs 1740 Mimco/TECO
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts
00218ET3H145T-W22 2.000 3 575 V 2.2 0.875" 145T 54 lbs 1750 WEG
TEFC, Premium (E-Plus3) Eff. Pulleys
Show parts

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Intakes & Intake Parts
Part
CD-VB-O-01M-HE Celdek and V-Bank for Size # 1 Modular Supply unit with HE filters. For outdoor installation. MERV 15 V-Bank Filters. Includes Screened Intake
Show parts
CD-VB-O-01M-HE-IL Celdek and V-Bank for Size # 1 Modular Supply unit with HE filters. For outdoor installation. MERV 15 V-Bank Filters. Includes Intake Louver.
Show parts
CD-VB-O-01M-HEPA Celdek and V-Bank for Size # 1 Modular Supply unit with HEPA filters. For outdoor installation. Includes Screened Intake
Show parts
CD-VB-O-01M-HEPA-IL Celdek and V-Bank for Size # 1 Modular Supply unit with HEPA filters. For outdoor installation. Includes Intake Louver.
Show parts
CD-VB-O-01M-TA Celdek and V-Bank for Size # 1 Modular Supply unit with TA filters. For outdoor installation. MERV 8 V-Bank Filters. Includes Screened Intake
Show parts
CD-VB-I-01M-TA Celdek and V-Bank for Size # 1 Modular Supply unit with TA filters. For indoor installation. MERV 8 V-Bank Filters.
Show parts
CD-VB-O-01M-TA-13-IL Celdek and V-Bank for Size # 1 Modular Supply unit with TA filters. For outdoor installation. MERV 13 V-Bank Filters. Includes Intake Louver.
Show parts
CD-VB-O-01M-TA-IL Celdek and V-Bank for Size # 1 Modular Supply unit with TA filters. For outdoor installation. MERV 8 V-Bank Filters. Includes Intake Louver.
Show parts
CD-VB-I-01M-TA-13 Celdek and V-Bank for Size # 1 Modular Supply unit with TA filters. For indoor installation. MERV 13 V-Bank Filters.
Show parts
CD-VB-O-01M-TA-13 Celdek and V-Bank for Size # 1 Modular Supply unit with TA filters. For outdoor installation. MERV 13 V-Bank Filters. Includes Screened Intake
Show parts
CD-VB-I-01M Celdek and V-Bank for Size # 1 Modular Supply unit. For indoor installation.
Show parts
CD-VB-O-01M Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-VB-O-01M-IL Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-O A1-IH Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air unit. 26.75" Wide X 76.438" Long X 29.688" High. Includes intake hood with filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A1 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air Unit. 26.75" Wide X 54.5" Long X 36.688" High. Includes screened intake. For outdoor installation.
Show parts
CD-O A1-NF Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air Unit. 26.75" Wide X 76.438" Long X 36.688" High. Includes intake hood without filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A1-IL Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air Unit. 26.75" Wide X 54.5" Long X 36.688" High. Includes intake louver. For outdoor installation.
Show parts
CD-I A1 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air unit. 26.75" Wide X 32.125" Long X 29.688" High. For indoor installation. Min. water pressure for optimal performance is 30 PSI. Max. water pressure should not exceed 50 PSI. Use with water softener recommended.
Show parts
SI-1 Screen Intake for Size 1 Commercial Fans.
Show parts
CD-O A2-NF-1 Size # 2 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air unit. 36.75" Wide X 85.813" Long X 36.688" High. Includes intake hood without filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-TL-O A2-1 Size # 2 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air Unit. 36.75" Wide X 142.438" Long X 36.688" High. Includes duct extension and screened intake. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A2-IH-1 Size # 2 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air unit. 36.75" Wide X 85.813" Long X 36.688" High. Includes intake hood with filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A2-1 Size # 2 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air Unit. ~ 36.75" Wide X 62.438" Long X 36.688" High. Includes screened intake. For outdoor installation. Use with water softener recommended.
Show parts
CD-I A2-1 Size 2 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air unit. 36.75" Wide X 32.125" Long X 36.688" High. For indoor installation. Min. water pressure for optimal performance is 30 PSI. Max. water pressure should not exceed 50 PSI. Use with water softener recommended.
Show parts
CD-LPD-VB-I-02-1M-TA-13 Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-02-1M-TA Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-02-1M Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-02-1M-HEPA Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-02-1M-HE Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-O-02-1M-HE Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-02-1M-HEPA Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-02-1M Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-02-1M-TA Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-02-1M-TA-13 Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-02-1M-IL Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-02-1M-HE-IL Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-02-1M-HEPA-IL Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-02-1M-TA-IL Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-02-1M-TA-13-IL Size 2 LPD Celdek and V-Bank for Size # 1 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
SFIH-01M Sloped Filtered Intake for Size #1 Modular Untempered Supply Unit. 21.813" Wide x 44.375" Long x 23.375" High. Includes 2" MV EZ Kleen Metal Mesh Filters.
Show parts
SFIH-01S Sloped Filtered Intake for Size #1 Standard Untempered Supply Unit. 22" Wide x 25.875" Long x 23.375" High. Includes 2" MV EZ Kleen Metal Mesh Filters.
Show parts
TL-01M TRUNKLINE - Extended Intake for size 1, modular untempered MUA unit, 19.75" Width, 132.32" Length, 21.32" Height Includes intake hood with 2" EZ Kleen metal mesh filters, adjustable legs and 87.75" long extension.
Show parts
TL-01S TRUNKLINE - Extended Intake for size 1, standard untempered MUA unit, 19.75" Width, 114" Length, 21.32" Height Includes intake hood with 2" EZ Kleen metal mesh filters, and 87.75" long extension.
Show parts
VB-O-01M-HE-IL V-Bank for Size # 1 Modular Make-Up Air unit with HE Filters. Includes intake louver. For outdoor installation. MERV 15 V-Bank Filters.
Show parts
VB-O-01M-HEPA-IL V-Bank for Size # 1 Modular Make-Up Air unit with HEPA filters. Includes intake louver. For outdoor installation.
Show parts
VB-O-01M-TA-13-IL V-Bank for Size # 1 Modular Make-Up Air unit with TA Filters. Includes intake louver. For outdoor installation. MERV 13 V-Bank Filters
Show parts
VB-O-01M-TA-IL V-Bank for Size # 1 Modular Make-Up Air unit with TA Filters. Includes intake louver. For outdoor installation. MERV 8 V-Bank Filters.
Show parts
VB-O-01M-IL V-Bank for Size # 1 Modular Make-Up Air unit. EZ Metal Mesh Filters. Includes intake louver. For outdoor installation.
Show parts
VB-I-01M-HE V-Bank for Size # 1 Modular Supply unit with HE filters. For indoor installation. MERV 15 V-Bank Filters.
Show parts
VB-I-01M-HEPA V-Bank for Size # 1 Modular Supply unit with HEPA filters. For indoor installation.
Show parts
VB-I-01M-TA V-Bank for Size # 1 Modular Supply unit with TA filters. For indoor installation. MERV 8 V-Bank Filters.
Show parts
VB-I-01M-TA-13 V-Bank for Size # 1 Modular Supply unit with TA filters. For indoor installation. MERV 13 V-Bank Filters.
Show parts
VB-I-01M V-Bank for Size # 1 Modular Supply unit. EZ Metal Mesh Filters. For indoor installation.
Show parts
VB-O-01M-TA-13-IH-EZ V-Bank for Size #1 Modular Indirect-Fired Heater with TA Filters. Includes intake hood with EZ filters. For outdoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-01M-HE V-Bank for Size #1 Modular Make-Up Air unit with HE Filters. Includes and screened intake. For outdoor installation. MERV 15 V-Bank Filters.
Show parts
VB-O-01M-HE-IH-EZ V-Bank for Size #1 Modular Make-Up Air unit with HE Filters. Includes intake hood with EZ filters. For outdoor installation. MERV 15 V-Bank Filters.
Show parts
VB-O-01M-HEPA V-Bank for Size #1 Modular Make-Up Air unit with HEPA filters. Includes and screened intake. For outdoor installation.
Show parts
VB-O-01M-HEPA-IH-EZ V-Bank for Size #1 Modular Make-Up Air unit with HEPA filters. Includes intake hood with EZ filters. For outdoor installation.
Show parts
VB-O-01M-TA V-Bank for Size #1 Modular Make-Up Air unit with TA Filters. Includes and screened intake. For outdoor installation. MERV 8 V-Bank Filters.
Show parts
VB-I-01M-TA-13 V-Bank for Size #1 Modular Make-Up Air unit with TA Filters. Includes screened intake. For indoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-01M-TA-13 V-Bank for Size #1 Modular Make-Up Air unit with TA Filters. Includes screened intake. For outdoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-01M V-Bank for Size #1 Modular Make-Up Air unit. EZ Metal Mesh Filters. Includes screened intake. For outdoor installation.
Show parts
VB-O-01M-TA-EZ V-Bank for Size #1 with TA Filters. Includes intake hood with EZ filters. For outdoor installation. MERV 8 V-Bank Filters.
Show parts
Replacement Parts
Part
33008
[4 used] 		A0003208 - 3/8" WASHERS
8003
[3 used] 		CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
1/4 Lock Washer
[4 used] 		Lock Washer for 1/4 Inch bolt
G10BRACKET
[1 used] 		Motor Platform for G10 Blower.
Scroll Plate
[2 used] 		Scroll Plate Angle Support for G7/G10/G12G15/G18 Blower Wheel - Ship With Mounting Hardware.
MLIFTL
[4 used] 		LIFTING LUG
0120763.0800
[4 used] 		A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
5/16-18 WHIZNUT
[8 used] 		Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
8002
[8 used] 		CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
B10DDB
[1 used] 		AHU 1 BOTTOM
800041
[2 used] 		Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030
[2 used] 		Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
NBB4000516
[8 used] 		5/16" NUTS
3M467J
[1 used] 		Captiveaire Factory Direct sticker
HG-OTA100
[4 used] 		Removable Door Hinge used on Pollution Control Units and KB Blowers
SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE
[4 used] 		SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles
104778
[1 used] 		SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
90272A829
[12 used] 		Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length
MANUAL UNTEMP
[1 used] 		Manual for Commercial Supply Fan
A7-10-351-20
[2 used] 		Black Compression Handle Latch and Clasp
2T4000516040000
[2 used] 		5/16" BOLTS 4" LONG
SB6-4-RIVET
[104 used] 		RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234
[10 used] 		SHEET METAL SCREWS 12-14 X 3/4"
M1EFLS
[2 used] 		1 END FLASHING
B1LIDDPRL
[1 used] 		AHU 1 LID w/Intergrated Drip Rail
B1BLBC
[2 used] 		BLOWER BRACE
ME12MR
[2 used] 		EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.
B1G10COL
[1 used] 		G10 COLLAR for size #1 heater.
M1HSUP
[4 used] 		HORIZONTAL SUPPORT
L1VIB
[4 used] 		Motor Frame Vibration Eliminator 1" Out. Dia. X 1/4" Tall, Rubber (Black) New Style, 5/16-18 x 1/2 dual studs. Durometer = 50
Curbs
Part
CRB21X7H ROOF CURB - 21" Square X 7" High
CRB21X8 ROOF CURB - 21" Square X 8" High
CRB21X12 ROOF CURB - 21" Square X 12" High
CRB21X14 ROOF CURB - 21" Square X 14" High
CRB21X15 ROOF CURB - 21" Square X 15" High
CRB21X16 ROOF CURB - 21" Square X 16" High
CRB21X20-BTC BOLT TOGETHER ROOF CURB -21" Square X 20" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB21X20 ROOF CURB - 21" Square X 20" High
CRB21.0X22.5H ROOF CURB - 21.0" Square X 22.5" High
CRB21X26 CURB - 21" Square X 26" High
CRB21X30 ROOF CURB - 21" Square X 30" High
CRB21X42 ROOF CURB - 21" Square X 42" High
Options
Part
D4120-DST-1.5-C Duct Mounted Smoke Detector For Commercial Direct Fired Heater. Complete with detector (D4120) and sampling tube (DST-1.5). Ships Loose
Show parts
CWCM1-2 CW Coil Module for Size 1 Modular Fans - 1,000 thru 3,250 CFM (5 Ton, 5WS1004B-31.5x27.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
CWCM1-4 CW Coil Module for Size 1 Modular Fans - 1,000 thru 3,250 CFM (12.5 Ton, 5WS1404B-31.5x27.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
Ecoat-AC-1 Size 1 Cooling Coil Ecoating option for MPU-AC options. Adds 5-6 week lead time.
Ecoat-1-MPU-RH Size 1 Cooling Coil Ecoating option for MPU-RH options. Adds 5-6 week lead time.
Ecoat-1-C Size 1 Cooling Coil Ecoating option for standard MPU, DX and Chilled Water Coils. Adds 5-6 week lead time.
Ecoat-1-H Size 1 Heating Coil Ecoating option for standard Hot Water and Steam Coils. Adds 5-6 week lead time.
3 Ton 1 Phase 208/230V Condensing Package 3 Ton, Single Circuit Condensing Unit. 1 phase 208-230V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. 24ACC436A003
Show parts
3 Ton 208/230V Condensing Package 3 Ton, Single Circuit Condensing Unit. 3 phase 208/230V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. Shipping included in price. 24ABB336A005
Show parts
3 Ton 460V Condensing Package 3 Ton, Single Circuit Condensing Unit. 3 phase 460V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. 24ABB336A006
Show parts
3 Ton 575V Condensing Package 3 Ton, Single Circuit Condensing Unit. 3 phase 575V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. 24ABB336A001
Show parts
5 Ton 1 Phase 208/230V Condensing Package 5 Ton, Single Circuit Condensing Unit. 1 phase 208-230V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. 24ABB360A003
Show parts
5 Ton 208/230V Condensing Package 5 Ton, Single Circuit Condensing Unit. 3 phase 208/230V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. 24ABB360A005
Show parts
5 Ton 460V Condensing Package 5 Ton, Single Circuit Condensing Unit. 3 phase 460V. Air Cooled. Includes: Disconnect Switch. R410A refrigerant and piping by others. 24ABB360A006
Show parts
A10SDAD-A 180° Side Discharge Air Diffuser A10, A12, A15. For Commercial Heaters.
A10DDAD3W-A 3-Way Down Discharge Air Diffuser A10, A12, A15. For Commercial Fans.
Show parts
A10DDAD4W-A 4-Way Down Discharge Air Diffuser A10, A12, A15. For Commercial Fans.
Show parts
A10DDAD-A 45° Down Discharge Air Diffuser A10, A12, A15. For Commercial Fans.
DXM1-3 DX Coil Module for Size 1 Modular Fans - 2,000 thru 3,250 CFM (10 Ton - 2 Circuit DX Coil, 4EZ0903H-31.5x27.0) NOT BUILT WITH OPP SIDE CONTROLS. DXM1-3 Condenser and condenser disconnect (unless provided on quote) will be installed, started and warranted by others. R410A refrigerant and piping by others. Ensure DX-Kit is ordered for filter drier, sight glass, thermal expansion valve. (Old Heatcraft Coil # 5EJ0804B-31.5x27.0)
Show parts
EC-FPDK-Evap Freeze Protection Drain Control kit for Evaporative Coolers. Includes 3-Way water solenoid valve 8316G064 (shipped loose), Pressure switch installed upstream of 2way solenoid in unit, Brass Tee, 2 NPT half inch nipples, and two stage thermostat T678A1361. Field wiring required by others for 3-way valve. For both Celdek and Standard V-bank type Configurations.
Show parts
CD-G-24x20x12 Glasdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.
CD-G-32x25x12 Glasdek Media for size 2 celdek evaporative cooler intake. 32in wide x 25in tall x 12in thick.
UFEC 120V Wiring connection to energize evaporative coolers from untempered supply fans.
XB-2 Extra Set of V-Belts. Only to be ordered as fan option at time fan is ordered.
MIAMI-DADE NOA-2 Supply Miami Dade Impact and Wind Load Certification +30 / -130 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof Mount Exhaust Curbs up to 20" high must be 18 gauge Aluminized.
5181 Gravity Back Draft Damper, 16" wide x 18" high, Standard Galvanized Construction, 1 1/4" Rear Flange, for Size 1 Untempered Fan Housing (5181)
HWCM1 Hot Water Coil Module for Size 1 Modular Fans - 3350 CFM @ 70deg Temp Rise (253,260 BTU's) Coil = 5MS1402B-19.5x16.5. Opposite airflow requires special order coil with extended lead-time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
IHC-MUA1 Indoor Hanging Cradle For The Size 1 Untempered Unit. 2 HSA125 Hanging Isolators per Uni-Strut Included.
Show parts
ADD_STARTER Adds a starter for untempered MPUs.
OPPSIDE-S-CTRLS Mount motor and disconnect on opposite side of fan.
6 Pole Rotary Disconnect 6 Pole 40 Amp Rotary Disconnect for Fans. Includes Switch, switch handle, mounting plate, gasket, and junction box.
Show parts
CVOUTLET GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
CT-CC DX Cooling Intake Air Thermostat - Ships Loose with Untempered fan - Set Point For Thermostat Should Be 85°F. Do Not Use When Cooling Option is in Pre-Wire Package.
Show parts
EXTENDED-DROP Extended Drop for Commercial Heaters and Supply Fans. Extends the power and remote panel connections to the unit to 20' of total length.
Single Electrical Cabinet LED Lights Single Electrical Cabinet LED Lights Used on Modular MUA Units
Show parts
MB1-MPU Support shell for Size 1 Modular Package Unit. Includes control vestibule. Includes condenser supports. Does not include return air or inlet air damper.
Show parts
MB1-NC Mixing Box for Size 1 Modular Supply Fan. Actuator and Controls provided by others.
Show parts
MB1-SP Mixing Box for Size 1 Modular Supply Fan. Actuator Control by Static Pressure. Photohelic included.
Show parts
MB1-Manual-0-10V Mixing Box for Size 1 Modular Supply Fan. Actuator Controlled by Manual 0-10V Signal from RTUlink-ACHP board.
Show parts
MB1-MP Mixing Box for Size 1 Modular Supply Fan. Actuator Control by Manual Potentiometer. Manual Potenentiometer included.
Show parts
MB1-TP Mixing Box for Size 1 Modular Supply Fan. 2-Position Actuator Control. Interlock field wired by others. Spring Return to Outside Air Position.
Show parts
MPU1-2-208-1 2 Ton, Single Circuit Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,000 to 1,200 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ0801M
Show parts
MPU1-3-208-1 3 Ton, Single Circuit Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
MPU1-3-208-3 3 Ton, Single Circuit Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
MPU1-3-460-3 3 Ton, Single Circuit Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
MPU1-3-575-3 3 Ton, Single Circuit Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
MPU1-5E-208-3 5 Ton, Dual Circuit (2.5/2.5) Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,800 to 3,000 cfm) NOT BUILT WITH OPPOSITE SIDE CONTROLS OR OPPOSITE AIRFLOW DIRECTION. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ0902ME
Show parts
MPU1-5-208-1 5 Ton, Dual Circuit (2/3) Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,800 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ0902M
Show parts
MPU1-2-AC-208-1 2 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1200 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2Ey1102E
Show parts
MPU1-3-AC-208-1 3 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1225 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1402E
Show parts
MPU1-3-AC-208-3 3 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1,225 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1402
Show parts
MPU1-3-AC-460-3 3 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1,225 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1402E
Show parts
MPU1-5E-AC-208-3 5 Ton, Dual Circuit (2.5/2.5) Modular Packaged AC Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (750 to 1,350 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1403
Show parts
MPU1-5-AC-208-1 5 Ton, Dual Circuit (2/3) Modular Packaged AC Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (750 to 1,350 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1403E
Show parts
MPU1-2-AC-HP-208-1 2 Ton, Single Circuit Modular Packaged AC Cooling Option with Heat Pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1200 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2Ey1102E
Show parts
MPU1-3-AC-HP-208-1 3 Ton, Single Circuit Modular Packaged AC Cooling Option with Heat Pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1225 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1402E
Show parts
MPU1-3-AC-HP-208-3 3 Ton, Single Circuit Modular Packaged AC Cooling Option with Heat Pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1,225 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1402
Show parts
MPU1-3-AC-HP-460-3 3 Ton, Single Circuit Modular Packaged AC Cooling Option with Heat Pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (450 to 1,225 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EY1402E
Show parts
MPU1-2-208-1-HP 2 Ton, Single Circuit Modular Packaged Cooling Option with heat pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,000 to 1,200 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ0801M
Show parts
MPU1-3-208-1-HP 3 Ton, Single Circuit Modular Packaged Cooling Option with heat pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
MPU1-3-208-3-HP 3 Ton, Single Circuit Modular Packaged Cooling Option with Heat Pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
MPU1-3-460-3-HP 3 Ton, Single Circuit Modular Packaged Cooling Option with heat pump for Size 1 Modular Packaged Unit. Includes Heat Pump, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 2EZ1001N
Show parts
A1UPDISCH Up Discharge Construction
Show parts
A1-U-MBDD Motorized Back Draft Damper 16" X 18" for Size 1 Untempered Units w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, Low Leakage, TFB120S Actuator Included
Show parts
A1-MBDD-SL Motorized Back Draft Discharge Damper Shipped Loose 22.75" X 24" for Size 1 Units w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, Low Leakage, LF120-S Actuator Included, Field Installation Required. Damper, actuator & actuator cover (p/n ACTCOVERMOD) factory assembled.
Show parts
Full Crating for Untempered Fan Full crating for untempered fans for shipping.
SPO10-Enamel Tan Enamel Coating For 10" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
Condenser_Locking_Caps_2 Locking caps for double condenser units. Consists of 4 locking caps, part# NCP-4, and 1 key, part# NC-KEY.
Show parts
Condenser_Locking_Caps_1 Locking caps for single condenser units. Consists of 2 locking caps, part# NCP-4, and 1 key, part# NC-KEY.
Show parts
HP_Condenser_Locking_Caps_1 Locking caps for single heat pump condenser units. Consists of 3 locking caps, part# NCP-4, and 1 key, part# NC-KEY.
Show parts
DX 1-1 KIT-R410A DX 1-1 Kit R410A. Single Circuit, 3 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
DX 1-2 KIT-R410A DX 1-2 Kit R410A. Single Circuit 5 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
DX 1-3 KIT-R410A DX 1-3 Kit R410A. Dual Circuit 10 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
DX 1-4 KIT-R410A DX 1-4 Kit R410A. Dual Circuit 12.5 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
ShipLoose-1C-1PH Ship Condenser Loose - Single Condenser, Single Phase - Condenser Disconnect Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
ShipLoose-1C-3PH Ship Condenser Loose - Single Condenser, Three Phase - Condenser Disconnect Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
ShipLoose-2C-1PH Ship Condensers Loose - Two Condensers, Single Phase - Condenser Disconnects Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
ShipLoose-2C-3PH Ship Condensers Loose - Two Condensers, Three Phase - Condenser Disconnects Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
SP-MPU-1C Single Point MPU Connection, 1 Condenser.
Show parts
SP-MPU-2C Single Point MPU Connection, 2 Condensers.
Show parts
MELIM-1 Size 1 Moisture Eliminator Option for DX Coils, MPUs and Chilled Water Coils - allows cooling coil face velocity to increase to 650 fpm. Increases cooling coil max cfm to 3650 cfm.
Show parts
MPU1-RH Size 1 MPU Reheat Option. Reheat uses warm liquid refrigerant. Reheat runs continuously in stage 1 circuit. Option should not be used if entering air dew point is below 65 degrees F. Nominal capacity 7.6 MBH. Increases max CFM to 1460.
Show parts
MELIM-1-AC Size 1 MPU-AC Moisture Eliminator Option - allows cooling coil face velocity to increase to 650 fpm. Increases cooling coil max cfm to 1450 cfm.
Show parts
MPU-AC CONTROL Control Package for Mod Package Unit Cooling Only Unit. Includes airflow proving switch, RTUlink-ACHP board and terminal blocks.
Show parts
MPU-HP CONTROL Control Package for Mod Package Unit Heat Pump Unit. Includes airflow proving switch, RTUlink-ACHP board and terminal blocks.
Show parts
SCM1 Steam Coil Module for Size 1 Modular Fans - 2,250 CFM @ 70deg Temp Rise (188,730 BTU's) Coil = 5JA0902B-19.5x16.5 Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
D-Hanger Curb Duct Hanger - 1-1/4" Angle Iron Frame Welded to Curb to support standard size ductwork. Priced per curb. Only available when curb assembly is ordered.
MB1-MERV 13-EXTRA Extra set of MERV 13 filters for Size 1 Mixing Box. Uses 5 10 x 16 x 2 inch filters.
Show parts
MB1-MERV 8-EXTRA Extra set of MERV 8 filters for Size 1 Mixing Box. 5 10 x 16 x 2 inch filters.
Show parts
MB1-MERV 13 MERV 13 filter option for Size 1 Mixing Box or Condenser Support. Mixing Box or Condenser Support must be selected for this option. Uses 5 10 x 16 x 2 inch filters.
Show parts
MB1-MERV 8 MERV 8 filter option for Size 1 Mixing Box or Condenser Support. Mixing Box or Condenser Support must be selected for this option. Uses 5 10 x 16 x 2 inch filters.
Show parts
DBWSLC-B-1 Double Wall Steel Liner for Blower. Includes Roof, Floor, and Doors Double Wall Liners.
Show parts
IBS1-2 Insulated Blower Housing Sizes 1-2 Commercial Modular
MB1-TOPRN Top Return Option for Size 1 Mixing Box - No Filter Option Available. Use top return lid and standard DF base.
Show parts
VBI-CSF "Insulation" for V-bank Intake Option.
VB-DS-MB1 V-bank Downstream of Mixing-Box Option Size 1
DCVWP-SUPPLY Separate 120VAC Wiring Package for Make-Up Air Units. Option must be selected when mounting VFD in prewire panel or with DCV package. Provides separate 120VAC input to supply fan. This 120V signal must be run by electrician from DCV to mua switch.
Show parts
VAV-WP-BSPC-UNTEMP VAV (Variable-Air-Volume) Wiring Package for Non Tempered Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
VAV-WP-MC-UNTEMP VAV (Variable-Air-Volume) Wiring Package for Non Tempered Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS-UNTEMP VAV (Variable-Air-Volume) Wiring Package for Non Tempered Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT VFD factory mounted and wired in unit control vestibule.
 
 
 

Security Policy     Privacy Policy     Legal Notice     Warranty     Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.