Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

IN-2-G12 Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

.5018OT3E56-S48PP 0.500 3 208-220-230/380/460 V 1.9-1.7-1.7/0.9/0.9 0.625" 56 20 lbs 1730 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.5018OT3E56-S48PP-50HZ 0.500 3 190/220/380/415 V 1.9/1.8/1/1 0.625" 56 20 lbs 1400 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB06H01-60HZ 0.500 1 115/208-230 V 7.6/4.2-3.8 0.625" 56 26 lbs 1730 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB06H01-50HZ 0.500 1 220 V 4.3 0.625" 56 26 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK56HB02F01-60HZ 0.750 1 115/208-230 V 6/3.3-3 0.625" 56 34 lbs 1750 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.7518OT3E56-S48PP-50Hz 0.750 3 190/220-230/380/415 V 2.6/2.4-2.9/1.3/1.3 0.625" 56 29 lbs 1410 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.7518OT3E56-S48PP 0.750 3 208-220-230/380/460 V 2.5-2.3-2.3/1.3/1.1 0.625" 56 24 lbs 1735 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00118OT3E56-S48PP 1.000 3 208-220-230/380/460 V 3.4-3.9-3.1/1.9/1.5 0.625" 56 26 lbs 1720 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK56HB02D01-60HZ 1.000 1 115/208-220-230 V 8.1/4.4-4.1-4 0.625" 56 39 lbs 1750 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

B337 1.000 1 277 V 5.6 0.625" 56 31 lbs 1725 Marathon

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	277 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

B338 1.500 1 277 V 7.5 0.625" 56H 38 lbs 1725 Marathon

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	277 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00158OT3E56-S48PP-50HZ 1.500 3 190/220/380/415 V 5.1/4.8/2.5/2.5 0.625" 56 31 lbs 1430 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218OT3E56Z-S48PP-50HZ 1.500 3 190/220/380/415 V 6.5/5.7/3.2/3 0.875" 56HZ 40 lbs 1400 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00158OT3E56-S48PP 1.500 3 208-220-230/380/460 V 4.6-4.2-4.2/2.4/2.1 0.625" 56 31 lbs 1710 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218OT3E56Z-S48PP 2.000 3 208-230/415/460 V 5.9-5.3/3/2.6 0.875" 56 40 lbs 1700 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00318OT3E56Z-S48PP-50HZ 2.000 3 190/220/380/415 V 6.9/6.7/3.4/3.5 0.875" 56 55 lbs 1410 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK56HB02B01-60HZ 2.000 1 115/208-230 V 16.5/9.5-8.1 0.875" 56HZ 58 lbs 1750 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00318OS1C184T 3.000 1 208-230 V 18.6-17.5 1.125" 184T 73 lbs 1745 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00318OT3E56Z-48PP 3.000 3 208-230/380/460 V 8.7-7.9/4.8/3.9 0.875" 56 55 lbs 1730 WEG

ODP, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

H868L 0.500 3 208-230/460 V 1.8-1.6/0.9 0.625" 56 18 lbs 1800 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

H869L 0.750 3 208-230/460 V 2.4-2.4/1.2 0.625" 56 20 lbs 1800 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

131509 2.000 1 115/208-230 V 24.8/13-12.4 1.125" 182T 75 lbs 1740 Leeson/Rempfer & Assoc.

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C40D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 40 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0024 2.000 3 190/200-208-230/380/400/460 V 6/5.9-5.7-5.2/3/2.9/2.6 0.875" 145T 40 lbs 1740 Mimco/TECO

TEFC, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
33008 [4 used]	A0003208 - 3/8" WASHERS
8003 [3 used]	CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
1/4 Lock Washer [4 used]	Lock Washer for 1/4 Inch bolt
G12BRACKET [1 used]	Motor Platform for G12 Blower
Scroll Plate [2 used]	Scroll Plate Angle Support for G7/G10/G12G15/G18 Blower Wheel - Ship With Mounting Hardware.
MLIFTL [4 used]	LIFTING LUG
800043 [4 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
0120763.0800 [4 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
5/16-18 WHIZNUT [8 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
8002 [10 used]	CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
NBB4000516 [8 used]	5/16" NUTS
WA4000516 [10 used]	5/16" WASHERS
Gasket-black [6 used]	GASKETING - Weather Stripping w/PSA , Color BLACK, 1/8" X 1" (Price per foot)
17916 [14 used]	GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)
INSULATION/sq ft [45 used]	INSULATION (Price per Sq Foot)
104778 [1 used]	SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
90272A829 [24 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length
MANUAL UNTEMP [1 used]	Manual for Commercial Supply Fan
9151 [1 used]	MV EZ Kleen Metal Mesh Filter. 20"x 25"x 2" Used for heater and supply fan intakes. (3416)
2T4000516040000 [2 used]	5/16" BOLTS 4" LONG
SB6-4-RIVET [116 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234 [10 used]	SHEET METAL SCREWS 12-14 X 3/4"
M2EFLS [2 used]	2 END FLASHING
B2LIDDPRL [1 used]	AHU 2 LID w/Intergrated Drip Rail
B2MNRL [2 used]	AHU 2 MAIN RAIL
B2RTFPH [1 used]	AHU 2 Right Front Post Hinged
B2BLBC [2 used]	BLOWER BRACE
B2G12COL [1 used]	G12 COLLAR
M2HSUP [2 used]	HORIZONTAL SUPPORT
B2NSID [2 used]	Inline2-G12 Filter Side
B2NFSP [1 used]	Inline2-G12 Filter Stop
B2NTOP [1 used]	Inline2-G12 Filter Top
L1VIB [4 used]	Motor Frame Vibration Eliminator 1" Out. Dia. X 1/4" Tall, Rubber (Black) New Style, 5/16-18 x 1/2 dual studs. Durometer = 50

Options

Part
XB-2	Extra Set of V-Belts. Only to be ordered as fan option at time fan is ordered.
IHC-INLINE2	Indoor Hanging Cradle For The Size 2 Untempered INLINE Unit. 2 HSA125 Hanging Isolators per Uni-Strut Included.
Show parts
	UNIVERSAL STRUT [8 used]	1-5/8"W x 2-7/16"D 12ga Uni-strut with yellow dichromate finish for mua hanging cradle. Per foot price.
	HSA125 [4 used]	Isolation spring with 125lbs resistance, 1.33" rated deflection, for hanging installation. Color, Brown
OPPSIDE-S-CTRLS	Mount motor and disconnect on opposite side of fan.
CVOUTLET	GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
Full Crating for Untempered Fan	Full crating for untempered fans for shipping.
SPO15-Enamel	Tan Enamel Coating For 15" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.