Sign In         Specifying Software      
 
    Home        About Us        Contact Us        Help Buy Online or Call 1-800-476-5888  
 
 
T2-D.750-22Z Parts
Motors, Pulleys, & Motor Specific Parts
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
186729/A01-ECM-50-480-22 5.000 3 460/480 V 5.1/4.8 0.000" 101 lbs 1920 Ziehl - Abegg
ODP-ECM (Open Drip Proof Electronically Commutated Motor)  
Show parts
186729/A01-ECM-60-480-22 5.000 3 460/480 V 5.1/4.8 0.000" 101 lbs 1920 Ziehl - Abegg
ODP-ECM (Open Drip Proof Electronically Commutated Motor)  
Show parts
186732/A01-ECM-50-240-22 5.000 3 200-208-230-240 V 11-10.6-9.6-9.2 0.000" 101 lbs 1870 Ziehl - Abegg
ODP-ECM (Open Drip Proof Electronically Commutated Motor)  
Show parts
186732/A01-ECM-60-240-22 5.000 3 200-208-230-240 V 11-10.6-9.6-9.2 0.000" 101 lbs 1870 Ziehl - Abegg
ODP-ECM (Open Drip Proof Electronically Commutated Motor)  
Show parts

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Intakes & Intake Parts
Part
CD-VB-I-02MDF-TA Celdek and V-Bank for Size # 2 Modular Heater with TA filters. For indoor installation. MERV 8 V-Bank Filters.
Show parts
CD-VB-I-02MDF-TA-13 Celdek and V-Bank for Size # 2 Modular Heater with TA filters. For indoor installation. MERV 13 V-Bank Filters.
Show parts
CD-VB-I-02MDF Celdek and V-Bank for Size # 2 Modular Heater. For indoor installation.
Show parts
CD-VB-O-02M-HE Celdek and V-Bank for Size # 2 Modular Supply unit with HE filters. For outdoor installation. MERV 15 V-Bank Filters. Includes Screened Intake
Show parts
CD-VB-O-02M-HE-IL Celdek and V-Bank for Size # 2 Modular Supply unit with HE filters. For outdoor installation. MERV 15 V-Bank Filters. Includes Intake Louver.
Show parts
CD-VB-I-02M-HE Celdek and V-Bank for Size # 2 Modular Supply unit with HE filters. For indoor installation. MERV 15 V-Bank Filters.
Show parts
CD-VB-O-02M-HEPA Celdek and V-Bank for Size # 2 Modular Supply unit with HEPA filters. For outdoor installation. Includes Screened Intake
Show parts
CD-VB-O-02M-HEPA-IL Celdek and V-Bank for Size # 2 Modular Supply unit with HEPA filters. For outdoor installation. Includes Intake Louver.
Show parts
CD-VB-I-02M-HEPA Celdek and V-Bank for Size # 2 Modular Supply unit with HEPA filters. For indoor installation.
Show parts
CD-VB-O-02M-TA Celdek and V-Bank for Size # 2 Modular Supply unit with TA filters. For outdoor installation. MERV 8 V-Bank Filters. Includes Screened Intake
Show parts
CD-VB-O-02M-TA-13-IL Celdek and V-Bank for Size # 2 Modular Supply unit with TA filters. For outdoor installation. MERV 13 V-Bank Filters. Includes Intake Louver.
Show parts
CD-VB-O-02M-TA-IL Celdek and V-Bank for Size # 2 Modular Supply unit with TA filters. For outdoor installation. MERV 8 V-Bank Filters. Includes Intake Louver.
Show parts
CD-VB-O-02M-TA-13 Celdek and V-Bank for Size # 2 Modular Supply unit with TA filters. For outdoor installation. MERV 13 V-Bank Filters. Includes Screened Intake
Show parts
CD-VB-O-02M Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-VB-O-02M-IL Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-I A2DF Celdek Evaporative Cooler for Size # 2 Modular Heater. 36.75" Wide X 32.125" Long X 36.688" High. For indoor installation. Min. water pressure for optimal performance is 30 PSI. Max. water pressure should not exceed 50 PSI. Use with water softener recommended.
Show parts
CD-O A2DF Celdek Evaporative Cooler for Size # 2 Modular Heater. 36.75" Wide X 62.438" Long X 36.688" High. Includes screened intake. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A2DF-IH Celdek Evaporative Cooler for Size # 2 Modular Heater. 36.75" Wide X 85.813" Long X 36.688" High. Includes intake hood with filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A2DF-NF Celdek Evaporative Cooler for Size # 2 Modular Heater. 36.75" Wide X 85.813" Long X 36.688" High. Includes intake hood without filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A2-IL Celdek Evaporative Cooler for Size # 2 Modular Un-tempered Supply Air Unit. ~36.75" Wide X 62.438" Long X 36.688" High. Includes intake louver. For outdoor installation. Use with water softener recommended.
Show parts
SI-2 Screen Intake for Size 2 Commercial Fans.
Show parts
CD-O A3DF-2 Size # 3 Celdek Evaporative Cooler for Size # 2 Modular Heater. 40.75" Wide x 72.313" Long x 43.375" High. Includes screened intake. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A3DF-IH-2 Size # 3 Celdek Evaporative Cooler for Size # 2 Modular Make-Up Air Heater. 40.75" Wide x 83.75" Long x 43.375" High. Includes intake hood with filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A3DF-NF-2 Size # 3 Celdek Evaporative Cooler for Size # 2 Modular Make-Up Air Heater. 40.75" Wide x 83.75" Long x 43.375" High. Includes intake hood without filters. For outdoor installation. Use with water softener recommended.
Show parts
CD-O A3-2-IL Size # 3 Celdek Evaporative Cooler for Size # 2 Modular Un-tempered Supply Air Unit. 40.75" Wide x 72.313" Long x 43.375" High. Includes intake louver. For outdoor installation. Use with water softener recommended.
Show parts
CD-LPD-VB-O-03-2M-IL Size 3 Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-I A3DF-2 Size 3 Celdek Evaporative Cooler for Size # 2 Modular Make-Up Air Heater. 40.75" Wide x 38.125" Long x 43.375" High. For indoor installation. Min. water pressure for optimal performance is 30 PSI. Max. water pressure should not exceed 50 PSI. Use with water softener recommended.
Show parts
CD-LPD-VB-I-03-2M-TA Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-03-2M-TA-13 Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-03-2M Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-03-2M-HE Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-I-03-2M-HEPA Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For indoor installation.
Show parts
CD-LPD-VB-O-03-2M-HEPA Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-03-2M-HE Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-03-2M Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-03-2M-TA-13 Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Screened Intake
Show parts
CD-LPD-VB-O-03-2M-HE-IL Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-03-2M-HEPA-IL Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-03-2M-TA-IL Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
CD-LPD-VB-O-03-2M-TA-13-IL Size 3 LPD Celdek and V-Bank for Size # 2 Modular Supply unit. For outdoor installation. Includes Intake Louver.
Show parts
SFIH-02MDF Sloped Filtered Intake for Size #2 Modular Heater. 26.813" Wide X 53.625" Long X 31.313" High. Includes 2" MV EZ Kleen Metal Mesh Filters.
Show parts
SFIH-02S Sloped Filtered Intake for Size #2 Standard Untempered Make-Up Air Unit with 12" blower wheel. 26.75" Wide x 29.25" Long x 31.5" High. Includes 2" MV EZ Kleen Metal Mesh Filters.
Show parts
TL-02MDF TRUNKLINE - Extended Intake for size #2 Modular Heater. 24.75" Wide, 91.68" Long, 29.25" High. Includes intake hood with 2" EZ Kleen metal mesh filters, adjustable legs and 38" long extension.
Show parts
TL-02SDirect TRUNKLINE - Low CFM Extended Intake for size #2 Modular Heater. 24.75" Wide, 91.68" Long, 29.25" High. Includes intake hood with 2" EZ Kleen metal mesh filters, adjustable legs and 38" long extension.
Show parts
VB-I-02MDF-TA V-Bank for Size # 2 Modular Heater with TA filters. For indoor installation. MERV 8 V-Bank Filters.
Show parts
VB-O-02MDF-TA V-Bank for Size # 2 Modular Heater with TA Filters. Includes screened intake. For outdoor installation. MERV 8 V-Bank Filters.
Show parts
VB-I-02MDF-TA-13 V-Bank for Size # 2 Modular Heater with TA filters. For indoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-02MDF-TA-13 V-Bank for Size # 2 Modular Heater with TA Filters. Includes screened intake. For outdoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-02M-HE V-Bank for Size # 2 Modular Make-Up Air unit with HE Filters. Includes screened intake. For outdoor installation. MERV 15 V-Bank Filters.
Show parts
VB-O-02M-HE-IL V-Bank for Size # 2 Modular Make-Up Air unit with HE Filters. Includes intake louver. For outdoor installation. MERV 15 V-Bank Filters.
Show parts
VB-O-02M-HEPA V-Bank for Size # 2 Modular Make-Up Air unit with HEPA filters. Includes screened intake. For outdoor installation.
Show parts
VB-O-02M-HEPA-IL V-Bank for Size # 2 Modular Make-Up Air unit with HEPA filters. Includes intake louver. For outdoor installation.
Show parts
VB-O-02M-TA-IL V-Bank for Size # 2 Modular Make-Up Air unit with TA Filters. Includes intake louver. For outdoor installation. MERV 8 V-Bank Filters
Show parts
VB-O-02M-TA-13-IL V-Bank for Size # 2 Modular Make-Up Air unit with TA Filters. Includes intake louver. For outdoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-02M-IL V-Bank for Size # 2 Modular Make-Up Air unit. EZ Metal Mesh Filters. Includes intake louver. For outdoor installation.
Show parts
VB-I-02M-HE V-Bank for Size # 2 Modular Supply unit with HE filters. For indoor installation. MERV 15 V-Bank Filters.
Show parts
VB-I-02M-HEPA-IS V-Bank for Size # 2 Modular Supply unit with HEPA filters. Screen Intake for Size 2 Commercial Fans. For indoor installation.
VB-O-02M-HE-IH-EZ V-Bank for Size #2 Modular Make-Up Air unit with HE Filters. Includes intake hood with EZ filters. For outdoor installation. MERV 15 V-Bank Filters.
Show parts
VB-O-02M-HEPA-IH-EZ V-Bank for Size #2 Modular Make-Up Air unit with HEPA filters. Includes intake hood with EZ filters. For outdoor installation.
Show parts
VB-O-02M-TA-13-IH-EZ V-Bank for Size #2 Modular Make-Up Air unit with TA Filters. Includes intake hood with EZ filters. For outdoor installation. MERV 13 V-Bank Filters.
Show parts
VB-O-02M-TA-IH-EZ V-Bank for Size #2 Modular Make-Up Air unit with TA Filters. Includes intake hood with EZ filters. For outdoor installation. MERV 8 V-Bank Filters.
Show parts
VB-I-02MDF V-Bank with EZ filters for Size # 2 Modular Heater. EZ Metal Mesh Filters. For indoor installation.
Show parts
VB-O-02MDF V-Bank with EZ filters for Size # 2 Modular Heater. EZ Metal Mesh Filters. Includes screened intake. For outdoor installation.
Show parts
Temperature Controls

No Temperature Controls Found.
Gas Manifold Parts

No Gas Manifold Parts Found.
Blower
Part
22Z-2-MOD 22 Inch Plenum Fan for size 2 MOD. Motor integral to Wheel. Max RPM = 1920.
Burner
Part
HMA-2A-18-A Direct-fired burner assembly. 825,000 BTU/HR Maximum, 27,500 BTU/HR Minimum. Aluminum Casting with SS Baffles. 18" long. Used in size 2 & 3 commercial direct-fired heater. Used for both Natural and Propane Gas. Pilot/Flame Rod/Spark Assembly included.
 
1190850
[1 used] 		BURNER PART - "BRUTE" PILOT ASSEMBLY W/ SPARK & FLAME ROD. Pilot hole size is drill #50 (.070 diameter) (342B) (A0003270) Includes pack of boots and hardware. REPLACES 1190870
 
1300140
[1 used] 		BURNER-HMA-2A 18" Assembled with bottom inlet. Does not include pilot assembly. Aluminum Casting. #462
Replacement Parts
Part
33008
[12 used] 		A0003208 - 3/8" WASHERS
8003
[6 used] 		CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
PN10-10RX-L
[1 used] 		Yellow Ring Expanded Entry for GTO Cable - Panduit Used on ignition transformers
HMI_Bracket
[1 used] 		20 GA. Galvanized. Used on IBT controls
Controller&HMI
HMI_01_MUA
[1 used] 		HMI assembly. Preprogrammed for use with MUA Board. Includes CASHMI PCB, 4 mounting screws, 16 ga. SS backing plate, membrane switches & gasket.
Direct Fired Air Movement Control Components
8164
[10 used] 		1/4" Nylon Tubing - Used with the Modular Make-Up Air Units A1-D, A2-D, A3-D, A4-D, A5-D and the NHMUA1, NHMUA2, NHMUA3, AI (Price Per Foot). Type 12.
88130
[2 used] 		1/4" Plastic Union Elbow for connecting airflow tubing to airflow probes (17045 & 17045A).
17045
[4 used] 		Airflow Switch Components Cleveland Controls Airflow Probe 2".
Direct Fired Components
MD23CABSEAL
[2 used] 		A2 & A3 Direct Fired Heater Cabinent Seal. Two Required per unit.
Direct Fired Flame Control Components
M4RT1
[1 used] 		Fireye Flame Safety Control. Direct replacement for M series 2. Pre-purge preset 5 Sec. PTFI preset 10 Sec. Recycles once only after flame signal loss. Wiring connections are identical to M series 2.
Direct Fired Sheet Metal Components
MD12MR
[2 used] 		DF 1-2 MAIN RAIL 45.25X8 GALV14GA REV5
D13TDSPDPRL
[2 used] 		DF 1-3 Top Door Support w/Integrated Drip Rail
D2APPP
[2 used] 		DF 2 ADJUSTING PROFILE PLATE
D2BOTTH
[1 used] 		DF 2 Bottom Hinged
D2DOORH
[1 used] 		DF 2 Burner Hinged Door
D2LTFPH
[1 used] 		DF 2 Left Front Post Hinged
D2LRDJH
[1 used] 		DF 2 Left Rear Door Jamb with Viewport Hinged
D2LIDDPRL
[1 used] 		DF 2 LID w/Integrated Drip Rail
D2DOORLH
[1 used] 		DF 2 Louver Door Hinged
D2PPPT
[2 used] 		DF 2 PROFILE PLATE POST
D2RTFPH
[1 used] 		DF 2 Right Front Post Hinged
D2RRDJH
[1 used] 		DF 2 Right Rear Door Jamb Hinged
D2BTPP
[1 used] 		DF 2 TOP PROFILE PLATE
MDBSUP
[1 used] 		DF BURNER SUPPORT 22X10 GALV14GA REV0
MDEBRD
[1 used] 		DF ELECTRIC BOARD
MDFRSD
[1 used] 		DF FLOOR HEAT SHIELD
MD15LCOVER
[1 used] 		Door Louver Cover for Commercial DF 1-5 Units.
MLIFTL
[4 used] 		LIFTING LUG
STS1643035
[6 used] 		Profile Plate Spring and Hinge used on Size 2 and 3 commercial direct fired heaters.
Exhaust Fan Whiz Nuts & Bolts
800043
[8 used] 		A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
0120763.0800
[10 used] 		A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
11626-03224
[10 used] 		Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
5/16-18 WHIZNUT
[8 used] 		Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
Exhaust Fan Wiring Options
8002
[14 used] 		CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
Intakes & Accessories
DUCTBOARD
[1 used] 		DUCTBOARD 4X10 SHEET Owens Corning Type 475FRK Insulation. 1 Sheet.
Miscellaneous Electrical Parts
CAT5_3FT
[1 used] 		3 Foot Long CAT5 Cable
800041
[2 used] 		Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030
[2 used] 		Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
MUA Board
[1 used] 		Printed Circuit board for use in heaters. Used in conjunction with CAS HMI.
1350890
[1 used] 		Terminal Assembly for Commercial DF Heaters. Terminals mounted on din rail: G,D3,D7,BO,BO,BC,BC,HB,H,H,H,F,DM,IEL,AL,N,N,NG. 285 MM DIN
Miscellaneous Heater Components
NBB4000516
[6 used] 		5/16" NUTS
WA4000516
[10 used] 		5/16" WASHERS
3M467J
[1 used] 		Captiveaire Factory Direct sticker
INSULATION/sq ft
[50 used] 		INSULATION (Price per Sq Foot)
HG-OTA100
[8 used] 		Removable Door Hinge used on Pollution Control Units and KB Blowers
1319
[1 used] 		VIEWPORT - 2" Plastic Viewport Used on the Modular Make-Up Air Units A1-D, A2-D, A3-D, A4-D, A5-D and the NHMUA1, NHMUA2, NHMUA3 Units
UNI VENT II - 20"
[1 used] 		Vinyl coated polyurethane foam, uv stabilized, fire retardant with continuous double glue strip. Used to seal louver cover and gaps in vbank filters, 2" wide and 1" thick. 20" Length.
Miscellaneous Hood Parts
SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE
[6 used] 		SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles
104778
[1 used] 		SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
Pollution Control Gasket
R-10480-S-1/4" BY 1"-15
[25 used] 		Saint Gobain Gasketing-SOFT, -1/4" by 1" , Red in Color. Backing is 3 M™ Adhesive 350 acrylic ideal for very high-bond strength to many surfaces. Comes in 15' rolls.
Product Manuals
MANUAL DIRECT
[1 used] 		Manual for Commercial Direct Fired Heater
RTU Miscellaneous Components
A7-10-351-20
[8 used] 		Black Compression Handle Latch and Clasp
Supply Fan Miscellaneous Parts
2T4000516040000
[2 used] 		5/16" BOLTS 4" LONG
SB6-4-RIVET
[266 used] 		RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234
[16 used] 		SHEET METAL SCREWS 12-14 X 3/4"
Supply Fan Sheet Metal Components
M2EFLS
[2 used] 		2 END FLASHING
B2DDBAVP2022Z
[1 used] 		A2 Direct Drive Blower Assembly Venturi Plate Ziehl
B2DDCZ
[1 used] 		A2 Direct Drive Collar Ziehl
B2DDDDLZ
[1 used] 		A2 Direct Drive Down Discharge Liner Ziehl
B2DDWGZ
[1 used] 		A2 Direct Drive Wheel Guard Ziehl
B2DDC
[1 used] 		AHU 2 Direct Drive Discharge Collar
B2ULLD
[1 used] 		AHU 2 Direct Drive Lid Liner
B2LIDDPRL
[1 used] 		AHU 2 LID w/Intergrated Drip Rail
B2MNRL
[2 used] 		AHU 2 MAIN RAIL
B2RTFPH
[1 used] 		AHU 2 Right Front Post Hinged
B2SDBKHDD
[1 used] 		AHU 2 Side Discharge Back Hinged Direct Drive
MCONWAS
[4 used] 		Connecting Washer 12 Gauge 2-7/8" x 2-7/8"
M2HSUP
[3 used] 		HORIZONTAL SUPPORT
Supply Fan Vibration Isolators
L1VIB
[4 used] 		Motor Frame Vibration Eliminator 1" Out. Dia. X 1/4" Tall, Rubber (Black) New Style, 5/16-18 x 1/2 dual studs. Durometer = 50
Thermostats/Sensors
A/CP-DO-240-QC
[2 used] 		10K, Type II thermistor with 6" probe. 20' wire leads. (Replaces part# A/CP-DO-120-QC)
Transformers
1092TYPEF
[1 used] 		Ignition Transformer 120V, 180VA, Output 6000 Volts Used with direct fired heaters
BE161640GEK0018
[1 used] 		TRANSFORMER - Low 40VA Voltage Transformer Used for 120v Primary and 24v Secondary.
Curbs
Part
CRB31X79X8INS ROOF CURB - 31" Wide X 79" Long X 8" High, Insulated. For the # 2 Modular Heater.
CRB31X79X10INS ROOF CURB - 31" Wide X 79" Long X 10" High, Insulated. For the # 2 Modular Heater.
CRB31X79X14INS ROOF CURB - 31" Wide X 79" Long X 14" High, Insulated. For the # 2 Modular Heater.
CRB31X79X15INS ROOF CURB - 31" Wide X 79" Long X 15" High, Insulated. For the # 2 Modular Heater.
CRB31X79X16INS ROOF CURB - 31" Wide X 79" Long X 16" High, Insulated. For the # 2 Modular Heater.
CRB31X79X18INS ROOF CURB - 31" Wide X 79" Long X 18" High, Insulated. For the # 2 Modular Heater.
CRB31X79X20INS ROOF CURB - 31" Wide X 79" Long X 20" High. Insulated.
CRB31X79X20INS-BTC BOLT TOGETHER ROOF CURB -31" X 79" X 20" High, Insulated. 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB31X79X24INS CURB - 31" Wide X 79" Long X 24" High, Insulated. For the # 2 Modular Heater.
CRB31X79X26INS CURB - 31" Wide X 79" Long X 26" High, Insulated. For the # 2 Modular Heater.
CRB31X79X28INS CURB - 31" Wide X 79" Long X 28" High, Insulated. For the # 2 Modular Heater.
CRB31X79X30INS CURB - 31" Wide X 79" Long X 30" High, Insulated. For the # 2 Modular Heater.
CRB31X79X36INS CURB - 31" Wide X 79" Long X 36" High, Insulated. For the # 2 Modular Heater.
CRB31X79X40INS ROOF CURB - 31" Wide X 79" Long X 40" High, Insulated. For the # 2 Modular Heater.
Options
Part
6631T18 Combustible Gas and Carbon Monoxide Detector 120VAC input. On-Board 10A, 250V Relay and 85db Audible Alarm. 150ppm CO, 17ppm H2, 5000 ppm Methane, 35ppm Propane. (HIC-822). 10,000 cubic feet recommended coverage per detector.
CSMDTIL Commercial Smoke Detector Interlock (Detector By Others)
D4120-DST-1.5-C Duct Mounted Smoke Detector For Commercial Direct Fired Heater. Complete with detector (D4120) and sampling tube (DST-1.5). Ships Loose
Show parts
CABHTR100WNC Control panel enclosure heater, includes 100w, 120v heater. Recommended for winter design temperature less than 0°F. Operates on PCB controls in IBT Single Modules or RTU
Show parts
CWCM2-1 CW Coil Module for Size 2 Modular Fans - 1,500 thru 5,300 CFM (5 Ton, 5WS0604B-37.5x36.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
CWCM2-2 CW Coil Module for Size 2 Modular Fans - 1,500 thru 5,300 CFM (10 Ton, 5WS1004B-37.5x36.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
CWCM2-3 CW Coil Module for Size 2 Modular Fans - 1,500 thru 5,300 CFM (15 Ton, 5WS1204B-37.5x36.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
CWCM2-4 CW Coil Module for Size 2 Modular Fans - 1,500 thru 5,300 CFM (20 Ton, 5WS1404B-37.5x36.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
Show parts
Ecoat-AC-2 Size 2 Cooling Coil Ecoating option for MPU-AC options. Adds 5-6 week lead time.
Ecoat-2-MPU-RH Size 2 Cooling Coil Ecoating option for MPU-RH options. Adds 5-6 week lead time.
Ecoat-2-C Size 2 Cooling Coil Ecoating option for standard MPU, DX and Chilled Water Coils. Adds 5-6 week lead time.
NON SILICONE Fan housing assembled without the use of silicone caulk. Primarily used for paint booth applications. Use Acrylic Latex Caulk , P/N A0011848.
5 Ton 2 Circuit 1 Phase 208/230V Condensing Package (2) 2.5 Ton (5 Ton Total), Dual Circuit Condensing Units. 1 phase 208-230V. Air Cooled. Includes: Disconnect Switch. R410 refrigerant and piping by others. Shipping included in price. 24ACC430A003
Show parts
5 Ton 2 Circuit 208/230V Condensing Package (2) 2.5 Ton (5 Ton Total), Dual Circuit Condensing Units. 3 phase 208/230V. Air Cooled. Includes: Disconnect Switch. R410 refrigerant and piping by others. Shipping included in price. 24ABB330A005
Show parts
CTR-CC DX Cooling Intake Air Thermostat and Relays Mounted in Unit - Set Point For Thermostat Should Be 85°F.
Show parts
CTR-RPI-400-CC Cooling Thermostat and Relay Mounted in Fan with 400M Series Remote Panel Interlock - Set Point For Thermostat Should Be 85°F.
Show parts
CTR-RPI-CC Cooling Thermostat and Relay Mounted in Fan with Remote Panel Interlock - Set Point For Thermostat Should Be 85°F.
Show parts
IACT-CC Intake Air Single Stage Cooling Thermostat Mounted in Unit - Set Point For Thermostat Should Be 85°F for MPU, 60°F for MPU-AC. Low Limit cooling thermostat.
Show parts
A10SDAD-A 180° Side Discharge Air Diffuser A10, A12, A15. For Commercial Heaters.
A10DDAD3W-A 3-Way Down Discharge Air Diffuser A10, A12, A15. For Commercial Fans.
Show parts
A10DDAD4W-A 4-Way Down Discharge Air Diffuser A10, A12, A15. For Commercial Fans.
Show parts
A10DDAD-A 45° Down Discharge Air Diffuser A10, A12, A15. For Commercial Fans.
FUSED_DISCONNECT_MOD FUSED DISCONNECT SWITCH FOR MODULAR UNITS
CCDTP2 Downturn Plenum for Size 2 Cooling Coil Module - Required for Down Discharge Cooling Coil Applications
Show parts
ECM Control - RTU/MUA (Ziehl Motor) ECM Wiring Package - Supply Fan Control-(1 Phase Ziehl Motor)
ECM Control - RTU/MUA (Ziehl Motor) ECM Wiring Package - Supply Fan Control-(3 Phase Ziehl Motor)
ECM Wiring Package- RTC (Ziehl) ECM Wiring Package and Manual or 0-10 VDC Control for Supply EC Ziehl Fans. RTC Controller
Show parts
ECM Wiring Package- ECPM03 (1PH-Ziehl) ECM Wiring Package-Supply - PWM Signal from ECPMO3 Prewire (1 - Phase Ziehl Motor)
Show parts
ECM Wiring Package- ECPM03 (Ziehl) ECM Wiring Package-Supply - PWM Signal from ECPMO3 Prewire (3 - Phase Ziehl Motor)
Show parts
ECRPI Evap Cooler Cooling Interlock Between Remote Panel and Heater
EC-FPDK-Evap Freeze Protection Drain Control kit for Evaporative Coolers. Includes 3-Way water solenoid valve 8316G064 (shipped loose), Pressure switch installed upstream of 2way solenoid in unit, Brass Tee, 2 NPT half inch nipples, and two stage thermostat T678A1361. Field wiring required by others for 3-way valve. For both Celdek and Standard V-bank type Configurations.
Show parts
IBT-EC-FPDK-Evap Freeze Protection Drain Control kit for Evaporative Coolers. Includes 3-Way water solenoid valve 8316G064 (shipped loose), Pressure switch installed upstream of 2way solenoid in unit, Brass Tee and 2 NPT half inch nipples. Field wiring required by others for 3-way valve. For both Celdek and Standard V-bank type Configurations.
Show parts
CD-G-32x25x12 Glasdek Media for size 2 celdek evaporative cooler intake. 32in wide x 25in tall x 12in thick.
CD-G-36x30x12 Glasdek Media for size 3 celdek evaporative cooler intake. 36in wide x 30in tall x 12in thick.
PRESSGA15 Gas Pressure Gauge, 0-15PSI, 2.5" Diameter, 1/4" Thread Size
PRESSGA35 Gas Pressure Gauge, 0-35", 2.5" Diameter, 1/4" Thread Size
PRESSGA5 Gas Pressure Gauge, 0-5#, 2.5" Diameter, 1/4" Thread Size
PRESSGA-5-0+15 Gas Pressure Gauge, -5 to +15 Inches Wc., 2.5" Diameter, 1/4" Thread Size
143-80-2-1-G-5/8 Gas regulator - 1" diameter thread size, 10 PSI Inlet Gas Pressure. 1180 CFH, 6-14" w.c. Outlet Pressure. Includes 173-62-021-17 "Green" spring and 5/8" 10 PSI orifice.
GMH-A4-4-4 High Gas Pressure Switch (1" - 20" WC) Factory set at 8" w.c. Replaces part HGP-A.
LGPSO Low Pressure Gas Switch (1" - 6" WC) Factory set at 2" w.c.
Show parts
Gas Strainer 1" Ship Loose Gas Strainer. To be installed upstream of unit connection. 1" Connection
Show parts
MIAMI-DADE NOA-2 Supply Miami Dade Impact and Wind Load Certification +30 / -130 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof Mount Exhaust Curbs up to 20" high must be 18 gauge Aluminized.
MWP-HMUA Melink Wiring Package for Heated Make-Up Air Units. 3 Phase Inverter duty Motor must be selected.
Show parts
IBT EVAP INTERLOCK Layer Control for IBT Evap
Show parts
IHC-DF2 Indoor Hanging Cradle For The Size 2 Direct Fired Unit. 2 HSA125 Hanging Isolators per Uni-Strut Included.
Show parts
AC-Interlock Cooling Interlock Relay. 24VAC Coil. 120V Contacts. Locks out burner circuit when AC is energized.
Show parts
Burner-Interlock-IBT/RTU Burner Interlock Input. Locks out cooling when interlock is energized.
Burner-Interlock Burner Interlock Relay. 120VAC Coil. 120V Contacts. Locks out burner circuit when Interlock is not energized.
Show parts
CLCOMM_REV04 CASLink building monitoring system communications module. Requires internet & field wired ethernet connection or 3G cellular service. Includes Rev 3 Comm Module, RJ45 to modbus converter, 3 FT cat5 cable, and 1 FT of shielded twisted pair.
Show parts
AC-Interlock-IBT/RTU Cooling Interlock Input to PCB Board. Locks out burner circuit when AC is energized.
DDC-IP BACnet Monitoring Remote IP BACnet monitoring for supply fans.
Show parts
DDC-LONWorks Monitoring Remote LONWorks monitoring for supply fans.
Show parts
DDC-MSTP BACnet Monitoring Remote MSTP BACnet monitoring
Show parts
Dry Mode Dry Mode
Show parts
CMEXSUPV Exhaust (exhaust by others) and supply proving for commercial make up air units. Includes timed relay (88867215 timer, SS70169-D base), requires field supplied exhaust interlock. Factory set to damper opening time plus 30 seconds.
Show parts
FECONTAAFS Field Wired Exhaust Contactor After Airflow Switch. Rated 23 Amps. Starts up to (2) Single Phase Motors. 2HP max. 115V, 3HP max. 240V. Starts one Three Phase Motor. 5HP max. 208V, 7.5HP 230v, 15HP max. 460V, 15HP max. 575V or (4) Dry Interlocks. Overload not Included
Show parts
FECONTBAFS Field Wired Exhaust Contactor Before Airflow Switch. Rated 23 Amps. Starts up to (2) Single Phase Motors. 2HP max. 115V, 3HP max. 240V. Starts one Three Phase Motor. 5HP max. 208V, 7.5HP max 230v, 15HP max. 460V. Overload not Included
Show parts
EXHSTARTER1-3AAFS Exhaust Fan Starter Installed in size 1, 2, or 3 heater powered after airflow swtich
EXHSTARTER1-3BAFS Exhaust Fan Starter Installed in size 1, 2, or 3 heater powered before airflow switch
Exhaust on Fire Exhaust on Fire
EXHRELAYBAFS Exhaust Relay Before Airflow Switch. Provides 2 sets of NO to be used as a start command interlock for exhaust fans.
Show parts
LFS Low Fire Start. Allows the burner circuit to energize when the modulation control is in a low fire position.
MANITOBA CODE No drops supplied in unit, no penetrations in base of unit. Used to meet Manitoba Canada requirement. Field wiring is made directly to disconnect switch and heater control panel terminal strip.
MAN RES FSC Manual reset of flame safety controller. Used to meet Canada requirement. Flame safety will not reset on cycle of power. Dips 1,2,3,5 closed, 4, 6 open standard settings.
NO CTRL DRPS No control drops supplied in unit. Field wiring is made directly to control panel. Main power drops are still supplied from disconnect.
OCCUPIED SCHEDULING Occupied Scheduling Defaulted for IBT/RTU.
OPPSIDE-H-CTRLS Mount motor and controls on opposite side of heater.
FECONTBAFS Field Wired Exhaust Contactor Before Airflow Switch. Rated 23 Amps. Starts up to (2) Single Phase Motors. 2HP max. 115V, 3HP max. 240V. Starts one Three Phase Motor. 5HP max. 208V, 7.5HP max 230v, 15HP max. 460V. Overload not Included
Show parts
Supply Fan Preset Speed Supply Fan Preset Speed Input to PCB. Field Wired.
1 Stage Cooling Terminals (Cooling by Others) 1 Stage Cooling Terminals (Cooling by Others)
2 Stage Cooling Terminals (Cooling by Others) 2 Stage Cooling Terminals (Cooling by Others)
6 Pole Rotary Disconnect 6 Pole 40 Amp Rotary Disconnect for Fans. Includes Switch, switch handle, mounting plate, gasket, and junction box.
Show parts
CLOGFILTHMI Clogged Filter Switch with Notification on HMI
Show parts
CLOGFILT Clogged Filter Switch with Light on Remote Panel
Show parts
CVOUTLET GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
EXTENDED-DROP Extended Drop for Commercial Heaters and Supply Fans. Extends the power and remote panel connections to the unit to 20' of total length.
RPLTSWITCH Light switch installed in heater remote panel.
Purge mode Purge option selected. Allows the user to purge the space by manually activtating on the HMI.
Show parts
Single Electrical Cabinet LED Lights Single Electrical Cabinet LED Lights Used on Modular MUA Units
Show parts
DBWSLDD-2 Double Wall Steel Liner for Direct Drive. Includes Roof, Floor, and Door Liners
Show parts
Upstream Pilot 1-3 Pilot located upstream of First Redundant Solenoid Valve of size 1-3 Max Gas Pressure of 14" wc.
Show parts
SPRCM-MUA-MOD Static Pressure Mixing box Control (Mounted in Unit, preset to: -0.01 and 0.02) Used with MUA board
Show parts
MB-AUX Mixing Box for Modular Supply Fan. Actuator Control by 2-10 VDC output. Controlled using AUX inputs
MB2-MUA Mixing Box for Size 2 Modular Supply Fan. Use with MUA controls.
Show parts
MB2-IBT-MAN Mixing Box for Size 2 IBT. Actuator Control By 0-10V Output on IBT Board.
Show parts
MB2-IBT-OA Mixing Box for Size 2 IBT. Actuator Control By 0-10V Output On IBT Board to Maintain Desired Outdoor Air %.
Show parts
MB2-IBT-SCHEDULE Mixing Box for Size 2 IBT. Actuator Control By Schedule.
Show parts
MB2-BAS Mixing Box for Size 2 Modular Supply Fan. Actuator Control by 2-10 VDC input.
Show parts
MB2-SP Mixing Box for Size 2 Modular Supply Fan. Actuator Control by Static Pressure. Photohelic included.
Show parts
MB2-MP Mixing Box for Size 2 Modular Supply Fan. Actuator Control by Manual Potentiometer. Manual Potenentiometer included.
Show parts
MB2-TP Mixing Box for Size 2 Modular Supply Fan. 2-Position Actuator Control. Interlock field wired by others. Spring Return to Outside Air Position.
Show parts
MPU2-DF-10-208-1 10 Ton, Dual Circuit (5/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (3,600 to 5,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ0802B
Show parts
MPU2-DF-10-208-3 10 Ton, Dual Circuit (5/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (3,600 to 5,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ0802B
Show parts
MPU2-DF-10-460-3 10 Ton, Dual Circuit (5/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (3,600 to 5,180 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ0802B
Show parts
MPU2-DF-10-575-3 10 Ton, Dual Circuit (5/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (3,600 to 5,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ0802B
Show parts
MPU2-DF-5-208-1 5 Ton, Single Circuit Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,000 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1001R
Show parts
MPU2-DF-5-208-3 5 Ton, Single Circuit Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,000 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1001R
Show parts
MPU2-DF-5-460-3 5 Ton, Single Circuit Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,000 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1001R
Show parts
MPU2-DF-5-575-3 5 Ton, Single Circuit Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,000 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1001R
Show parts
MPU2-DF-7.5-208-1 7.5 Ton, Dual Circuit (2.5/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,700 to 4,500 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1101C
Show parts
MPU2-DF-7.5-208-3 7.5 Ton, Dual Circuit (2.5/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,700 to 4,500 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1101C
Show parts
MPU2-DF-8-208-1 8 Ton, Dual Circuit (3/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,900 to 4,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1101D
Show parts
MPU2-DF-8-208-3 8 Ton, Dual Circuit (3/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,900 to 4,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1101D
Show parts
MPU2-DF-8-460-3 8 Ton, Dual Circuit (3/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,900 to 4,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1101D
Show parts
MPU2-DF-8-575-3 8 Ton, Dual Circuit (3/5) Modular Packaged Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (2,900 to 4,800 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EZ1101D
Show parts
MPU2-DF-10-AC-208-1 10 Ton, Dual Circuit (5/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1500 to 3000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1203T
Show parts
MPU2-DF-10-AC-208-3 10 Ton, Dual Circuit (5/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1500 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1203
Show parts
MPU2-DF-10-AC-460-3 10 Ton, Dual Circuit (5/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1500 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1203
Show parts
MPU2-DF-10-AC-575-3 10 Ton, Dual Circuit (5/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1500 to 3,000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1203
Show parts
MPU2-DF-5-AC-208-1 5 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,000 to 2,750 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1102T
Show parts
MPU2-DF-5-AC-208-3 5 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,000 to 2,750 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1102
Show parts
MPU2-DF-5-AC-460-3 5 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,000 to 2,750 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1102
Show parts
MPU2-DF-5-AC-575-3 5 Ton, Single Circuit Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,000 to 2,750 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1102
Show parts
MPU2-DF-7.5-AC-208-1 7.5 Ton, Dual Circuit (2.5/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1125 to 3000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1402
Show parts
MPU2-DF-7.5-AC-208-3 7.5 Ton, Dual Circuit (2.5/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1125 to 3000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1402
Show parts
MPU2-DF-8-AC-208-1 8 Ton, Dual Circuit (3/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1200 to 3000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 1 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1302T
Show parts
MPU2-DF-8-AC-208-3 8 Ton, Dual Circuit (3/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1200 to 3000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 208V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1302T
Show parts
MPU2-DF-8-AC-460-3 8 Ton, Dual Circuit (3/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1200 to 3000 cfm) When ordered with opposite airflow condensers access and coil piping will remain in standard position. Drain and sleds will move to the opposite side. Any other change will require CLI. CONDENSERS REQUIRE SEPARATE 460V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1302T
Show parts
MPU2-DF-8-AC-575-3 8 Ton, Dual Circuit (3/5) Modular Packaged AC Cooling Option for Size 2 DF/EH Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1200 to 3000 cfm) NOT BUILT WITH OPPOSITE SIDE CONTROLS OR OPPOSITE AIRFLOW DIRECTION. CONDENSERS REQUIRE SEPARATE 575V, 3 PHASE POWER SUPPLY UNLESS ORDERED WITH SINGLE POINT CONNECTION. Coil = 3EY1302T
Show parts
A2UPDISCH-DD Up Discharge Construction for Direct Drive AHUs
Show parts
Shaft Grounding Ring Option Shaft Grounding Ring Option
A2-D-MBDD INS Motorized Back Draft Insulated Damper 22.75" X 24" for Size 2 Standard & Modular Heater Units w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, Low Leakage, LF120S Actuator Included. Insulated blades and frame. Thermally broken blades.
Show parts
A2-D-MBDD-SL Direct Fired -- Motorized Back Draft Discharge Damper Shipped Loose 30" X 30" for Size 2 Units w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, Low Leakage, NFBUP-S Actuator Included, Field Installation Required. Damper, actuator & actuator cover (p/n ACTCOVERMOD) factory assembled.
Show parts
FIELDDMP(S) Field Supplied Damper(s) Indicated By Others
A2-D-MBDD Motorized Back Draft Damper 22.75" X 24" for Size 2 Standard & Modular Heater Units w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, Low Leakage, LF120S Actuator Included
Show parts
Full Crating for Heater Full crating for commercial heaters for shipping.
ENAM-1 Tan Enamel Coating (exterior walls/roof) For Heaters with 7"-15" blower wheels, includes casing and intakes. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
Condenser_Locking_Caps_2 Locking caps for double condenser units. Consists of 4 locking caps, part# NCP-4, and 1 key, part# NC-KEY.
Show parts
Condenser_Locking_Caps_1 Locking caps for single condenser units. Consists of 2 locking caps, part# NCP-4, and 1 key, part# NC-KEY.
Show parts
DX 2-1 KIT-R410A DX 2-1 Kit R410A. Dual Circuit 5 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
DX 2-2 KIT-R410A DX 2-2 Kit R410A. Dual Circuit 10 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
DX 2-3 KIT-R410A DX 2-3 Kit R410A. Dual Circuit 15 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
DX 2-4 KIT-R410A DX 2-4 Kit R410A. Dual Circuit 20 Ton. Includes Filter Drier, Sight Glass, and Thermal Expansion Valve for DX units. Installation by others. Includes R410A TXV. Installation by others. Includes R410A TXV.
Show parts
ShipLoose-1C-1PH Ship Condenser Loose - Single Condenser, Single Phase - Condenser Disconnect Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
ShipLoose-1C-3PH Ship Condenser Loose - Single Condenser, Three Phase - Condenser Disconnect Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
ShipLoose-2C-1PH Ship Condensers Loose - Two Condensers, Single Phase - Condenser Disconnects Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
ShipLoose-2C-3PH Ship Condensers Loose - Two Condensers, Three Phase - Condenser Disconnects Shipped Loose. All piping and wiring between indoor and outdoor units by others.
Show parts
SP-MPU-1C Single Point MPU Connection, 1 Condenser.
Show parts
SP-MPU-2C Single Point MPU Connection, 2 Condensers.
Show parts
MELIM-2 Size 2 Moisture Eliminator Option for DX Coil, MPUs and Chilled Water Coils - allows cooling coil face velocity to increase to 650 fpm. Increases cooling coil max cfm to 6000 cfm.
Show parts
MPU2-RH Size 2 MPU Reheat Option. Reheat uses warm liquid refrigerant. Reheat runs continuously in stage 1 circuit. Option should not be used if entering air dew point is below 65 degrees F. Nominal capacity 14.9 MBH. Increases max CFM to 3250
Show parts
MELIM-2-AC Size 2 MPU-AC Moisture Eliminator Option - allows cooling coil face velocity to increase to 650 fpm. Increases cooling coil max cfm to 3250 cfm.
Show parts
D-Hanger Curb Duct Hanger - 1-1/4" Angle Iron Frame Welded to Curb to support standard size ductwork. Priced per curb. Only available when curb assembly is ordered.
MB2-MERV 13-EXTRA Extra set of MERV 13 filters for Size 2 Mixing Box. Uses 2 20 x 25 x 2 inch filters and 1 16 x 25 x 2 inch filters.
Show parts
MB2-MERV 8-EXTRA Extra set of MERV 8 filters for Size 2 Mixing Box. Uses 2 20 x 25 x 2 inch filters and 1 16 x 25 x 2 inch filters.
Show parts
MB2-MERV 13 MERV 13 filter option for Size 2 Mixing Box or Condenser Support. Mixing Box or Condenser Support must be selected for this option. Uses 2 20 x 25 x 2 inch filters and 1 16 x 25 x 2 inch filters.
Show parts
MB2-MERV 8 MERV 8 filter option for Size 2 Mixing Box or Condenser Support. Mixing Box or Condenser Support must be selected for this option. Uses 2 20 x 25 x 2 inch filters and 1 16 x 25 x 2 inch filters.
Show parts
Ship Modules Separate Ship Modules Separate Option for Modular Units
MB2-TOPRN Top Return Option for Size 2 Mixing Box - No Filter Option Available. Use top return lid and standard DF base.
Show parts
FIRESTAT-DISCHARGE Discharge Firestat for Heaters Set to 240°F - Old Controls
Show parts
FREEZESTAT- Freezestat factory set at 35°F and 10 minutes.
FIRESTAT-INTAKE Intake Firestat for Heaters Set to 135°F - Old Controls
Show parts
IBT/RTU remote Space Sensor Remote Room Sensor Option. Wall Mountable 10k Room Sensor Included.
Show parts
IBT/RTU remote Space Sensor Temp/Hum Remote Room Sensor Option. Wall Mountable 10k Temp and Humidity Room Sensor Included.
Show parts
PRE-PT Pre purge (set at 30 seconds) allowing the blower to purge the inside of the heater.
CCUTP2 Upturn Plenum for Size 2 Cooling Coil Module - Required for Up Discharge Cooling Coil Applications
Show parts
VBI-CSF "Insulation" for V-bank Intake Option.
VB-DS-MB2 V-bank Downstream of Mixing-Box Option Size 2
DCVWP-SUPPLY Separate 120VAC Wiring Package for Make-Up Air Units. Option must be selected when mounting VFD in prewire panel or with DCV package. Provides separate 120VAC input to supply fan. This 120V signal must be run by electrician from DCV to mua switch.
Show parts
VAV-WP-VDC-INPUT-MUA VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. 0-10VDC Speed Control Variable Frequency Drive Included
VAV-WP-BSPC VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
VAV-WP-BSPC-PCBMUA VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included-MUA Board
Show parts
VAV-WP-DSPC-PCBMUA VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Duct Static Pressure Variable Frequency Drive Control Included- MUA Board
Show parts
VAV-WP-MC VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-MC-MUA VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT VFD factory mounted and wired in unit control vestibule.
 
 
 

Security Policy     Privacy Policy     Legal Notice     Warranty     Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.