Fan Parts

Specifying Software

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

IN-3-25Z Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

186738/A01-ECM-50-240-25 4.800 3 200-208-220-230-240 V 12-11.5-10.9-10.4-10 0.000" 119 lbs 1580 Ziehl - Abegg

ODP-ECM (Open Drip Proof Electronically Commutated Motor)


100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	240 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

186738/A01-ECM-60-240-25 4.800 3 200-208-220-230-240 V 12-11.5-10.9-10.4-10 0.000" 119 lbs 1580 Ziehl - Abegg

ODP-ECM (Open Drip Proof Electronically Commutated Motor)


100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	240 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

186736/A01-ECM-60-480-25 4.800 3 460/480 V 5/4.7 0.000" 119 lbs 1580 Ziehl - Abegg

ODP-ECM (Open Drip Proof Electronically Commutated Motor)


100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	480 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

186733/A01-ECM-50-480-25 7.250 3 380/400/415/440/460/480 V 8.8/8.4/8/7.6/7.3/7 0.000" 145 lbs 1840 Ziehl - Abegg

ODP-ECM (Open Drip Proof Electronically Commutated Motor)


100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	440 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	480 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

186733/A01-ECM-60-480-25 7.250 3 380/400/415/440/460/480 V 8.8/8.4/8/7.6/7.3/7 0.000" 145 lbs 1840 Ziehl - Abegg

ODP-ECM (Open Drip Proof Electronically Commutated Motor)


100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	440 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	480 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
33008 [4 used]	A0003208 - 3/8" WASHERS
8003 [3 used]	CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
MLIFTL [4 used]	LIFTING LUG
800043 [8 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
0120763.0800 [12 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
11626-03224 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
5/16-18 WHIZNUT [12 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
8002 [12 used]	CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
DUCTBOARD [1 used]	DUCTBOARD 4X10 SHEET Owens Corning Type 475FRK Insulation. 1 Sheet.
NBB4000516 [6 used]	5/16" NUTS
WA4000516 [10 used]	5/16" WASHERS
Gasket-black [6 used]	GASKETING - Weather Stripping w/PSA , Color BLACK, 1/8" X 1" (Price per foot)
17916 [12 used]	GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)
INSULATION/sq ft [60 used]	INSULATION (Price per Sq Foot)
104778 [1 used]	SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
MANUAL UNTEMP [1 used]	Manual for Commercial Supply Fan
9151 [2 used]	MV EZ Kleen Metal Mesh Filter. 20"x 25"x 2" Used for heater and supply fan intakes. (3416)
2T4000516040000 [2 used]	5/16" BOLTS 4" LONG
SB6-4-RIVET [116 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234 [10 used]	SHEET METAL SCREWS 12-14 X 3/4"
B3DDBAVP25Z [1 used]	A3 Direct Drive Blower Assembly Venturi Plate Ziehl
B3DDCZ [2 used]	A3 Direct Drive Collar Ziehl
B3DDDDLZ [1 used]	A3 Direct Drive Liner Ziehl
B3DDWGZ [1 used]	A3 Direct Drive Wheel Guard Ziehl
B3DDC [1 used]	AHU 3 Direct Drive Discharge Collar
B3LIDDPRL [1 used]	AHU 3 LID w/Intergrated Drip Rail
B3MNRL [2 used]	AHU 3 MAIN RAIL
B3SDBKHDD [1 used]	AHU 3 Side Discharge Back Hinged Direct Drive
B3NFSP [1 used]	B3NFSP - INLINE 3 FILTER STOP
M3EFLS [2 used]	END FLASHING 37.9375X8 GALV18GA REV1
M3HSUP [3 used]	HORIZONTAL SUPPORT
B3NBOT [1 used]	INLINE 3 BOTTOM TRACK
B3NTOP [1 used]	INLINE 3 FILTER TOP
B3ULLD [1 used]	Lid Liner Blank for use with AHU-3 Insulation Liner Option.
L1VIB [4 used]	Motor Frame Vibration Eliminator 1" Out. Dia. X 1/4" Tall, Rubber (Black) New Style, 5/16-18 x 1/2 dual studs. Durometer = 50

Options

Part
ECM Control - RTU/MUA (Ziehl Motor)	ECM Wiring Package - Supply Fan Control-(1 Phase Ziehl Motor)
ECM Control - RTU/MUA (Ziehl Motor)	ECM Wiring Package - Supply Fan Control-(3 Phase Ziehl Motor)
ECM Wiring Package- RTC (Ziehl)	ECM Wiring Package and Manual or 0-10 VDC Control for Supply EC Ziehl Fans. RTC Controller
Show parts
	ECM-Harness-Ziehl [1 used]	ECM Wiring Harness used on Ziehl supply fans, connects speed controller to Ziehl motor. 10ft.
	52171-1/2&3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
ECM Wiring Package - MSC (1PH-Ziehl)	ECM Wiring Package and Manual or 0-10 VDC Control for Supply EC Single Phase Ziehl Fans. MSC Controller
Show parts
	ECM-Harness-Ziehl [1 used]	ECM Wiring Harness used on Ziehl supply fans, connects speed controller to Ziehl motor. 10ft.
	2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC (Ziehl)	ECM Wiring Package and Manual or 0-10 VDC Control for Supply EC Ziehl Fans. MSC Controller
Show parts
	ECM-Harness-Ziehl [1 used]	ECM Wiring Harness used on Ziehl supply fans, connects speed controller to Ziehl motor. 10ft.
	2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package- ECPM03 (1PH-Ziehl)	ECM Wiring Package-Supply - PWM Signal from ECPMO3 Prewire (1 - Phase Ziehl Motor)
Show parts
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
ECM Wiring Package- ECPM03 (Ziehl)	ECM Wiring Package-Supply - PWM Signal from ECPMO3 Prewire (3 - Phase Ziehl Motor)
Show parts
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
IHC-INLINE3	Indoor Hanging Cradle For The Size 3 Untempered INLINE Unit. 2 HSA200 Hanging Isolators per Uni-Strut Included.
Show parts
	UNIVERSAL STRUT [10 used]	1-5/8"W x 2-7/16"D 12ga Uni-strut with yellow dichromate finish for mua hanging cradle. Per foot price.
	HSA200 [4 used]	Isolation spring with 200lbs resistance, 1.15" rated deflection, for hanging installation. Color, Black.
OPPSIDE-S-CTRLS	Mount motor and disconnect on opposite side of fan.
CVOUTLET	GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
Full Crating for Untempered Fan	Full crating for untempered fans for shipping.
SPO18-Enamel	Tan Enamel Coating For 18" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.