Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

IN-2-20D Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP0026 2.000 3 208-230/415/460 V 8.3-7.5/3.1/3.8 1.125" 184T 68 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0024 2.000 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-7/8	7/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0024-50HZ 2.000 3 190/220/380 V 6.5/5.5/3.2 0.875" 145T 44 lbs 1415 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-7/8	7/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0036 3.000 3 208-230/380/460 V 10.2-9.2/5.4/4.6 1.375" 213T 120 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0034 3.000 3 208-230/380/415/460 V 9.5-8.6/5.2/4.8/4.3 1.125" 182T 69 lbs 1755 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0034-50HZ 3.000 3 190/208-220-230/380/415 V 10.4/9.8-9.2-9.2/5.2/4.9 1.125" 182T 69 lbs 1438 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00312OT3H213T-S 3.000 3 575 V 3.3 1.375" 213T 104 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00518OT3H184T-S 5.000 3 575 V 5 1.125" 184T 80 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0054-50 5.000 3 190/208-230/380/415 V 14.9/15-13.6/7.5/8.1 1.125" 182T 89 lbs 1435 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0054 5.000 3 190/200-208-230/380/400/415/460 V 17/15.6-15-13.6/8.5/7.7/7.5/6.8 1.125" 184T 77 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0056 5.000 3 208-230/380/415/460 V 15.8-14.3/8.4/8/7.2 1.375" 215T 123 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP7/54 7.500 3 200-208-230/380/400/460 V 21.5-21.1-19.1/11.4/10.8/9.6 1.375" 213T 104 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP7/54-50 7.500 3 190/208-230/380/415 V 22.9/21.1-19.1/11.5/10.7 1.375" 213T 158 lbs 1470 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0024 2.000 3 190/200-208-230/380/400/460 V 6/5.9-5.7-5.2/3/2.9/2.6 0.875" 145T 40 lbs 1740 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-7/8	7/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0024-50 2.000 3 190/220/380 V 6.2/6.1/3.1 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-7/8	7/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218ET3H145T-W22 2.000 3 575 V 2.2 0.875" 145T 54 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-7/8	7/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00212ET3H184T-W22 2.000 3 575 V 2.6 1.125" 182T 103 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0026 2.000 3 200-208-230/460 V 7.6-7.3-6.6/3.3 1.125" 184T 84 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00318ET3H182T-W22 3.000 3 575 V 3.1 1.125" 182T 94 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0034 3.000 3 190/208-230/380/400/460 V 9.8/9.4-8.5/4.9/4.6/4.3 1.125" 182T 60 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0034-50 3.000 3 190/380 V 9.9/4.9 1.125" 182T 60 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0054 5.000 3 190/200-208-230/380/400/460 V 15.6/14.9-14.5-13.1/7.8/7.4/6.6 1.125" 184T 82 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0054-50 5.000 3 190/220/380 V 15.9/15.9/7.9 1.125" 184T 82 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00518ET3H184T-W22 5.000 3 575 V 5.1 1.125" 184T 104 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-1/8	1-1/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
33008 [4 used]	A0003208 - 3/8" WASHERS
8003 [3 used]	CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
MLIFTL [4 used]	LIFTING LUG
F5020020MUSBI [1 used]	USBI20 - Spun Inlet.
800113-D80 [6 used]	Motor Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black with Marking) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 80
F8010020P1-B-MF [1 used]	Mixed Flow Wheel Assembly (size 20) 14 5/8" Dia. Top X 14 5/8" Dia. Ins. Bottom X 9 3/16" Height. Uses 10" Ø B Hub with P1 Bushings. *Requires P1 type split taper bushing if ordered as a replacement part.
11626-03224 [8 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
5/16-18 WHIZNUT [8 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
8002 [10 used]	CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
Gasket-black [6 used]	GASKETING - Weather Stripping w/PSA , Color BLACK, 1/8" X 1" (Price per foot)
17916 [14 used]	GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)
INSULATION/sq ft [45 used]	INSULATION (Price per Sq Foot)
104778 [1 used]	SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
90272A836 [16 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555
90272A829 [8 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length
MANUAL UNTEMP [1 used]	Manual for Commercial Supply Fan
9151 [1 used]	MV EZ Kleen Metal Mesh Filter. 20"x 25"x 2" Used for heater and supply fan intakes. (3416)
SB6-4-RIVET [116 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234 [10 used]	SHEET METAL SCREWS 12-14 X 3/4"
M2EFLS [2 used]	2 END FLASHING
B2DDC [1 used]	AHU 2 Direct Drive Discharge Collar
B2DDINL [1 used]	AHU 2 Direct Drive Down Discharge Inline Liner
B2ULLD [1 used]	AHU 2 Direct Drive Lid Liner
B2DDMM [1 used]	AHU 2 Direct Drive Motor Mount
B2DDMMS [1 used]	AHU 2 Direct Drive Motor Mount Support
B2DDWG [1 used]	AHU 2 Direct Drive Wheel Guard
B2LIDDPRL [1 used]	AHU 2 LID w/Intergrated Drip Rail
B2MNRL [2 used]	AHU 2 MAIN RAIL
B2RTFPH [1 used]	AHU 2 Right Front Post Hinged
B2SDBKHDD [1 used]	AHU 2 Side Discharge Back Hinged Direct Drive
B2DDBAVP [1 used]	AHU2 Direct Drive Blower Assembly Venturi Plate
M2HSUP [3 used]	HORIZONTAL SUPPORT
B2NSID [2 used]	Inline2-G12 Filter Side
B2NFSP [1 used]	Inline2-G12 Filter Stop
B2NTOP [1 used]	Inline2-G12 Filter Top

Options

Part
EGL-MUA	Extended Grease Lines for Commercial MUA Fans. Grease Zerk fittings installed on outside of fan housing, directly below disconnect switch. Requires (2) 25/64" holes drilled in cabinet exterior.
Show parts
	0402419 [2 used]	1/4" MPT x 1/8" FPT Stl Strait Expander 5405 Series - Used on extended grease lines. Screws into pillow block bearing.
	66570 [2 used]	1/8" Coupler - Used on extended grease lines. Secures zerk fitting to sheet metal housing.
	60102 [2 used]	1/8" NPT Straight Standard Zerk Fitting - Used on extended grease lines.
	440576-131280 [4 used]	Brass 90(1/4"Tube OD x 1/8" MPT 2000psi Brass 90Deg SELFALIGN Elbow). Used as 90 deg fitting on extended grease lines.
	COPPER TUBING 1/4 FOOT [10 used]	Pilot Line Copper Tubing (price per Foot) (Roll Quantity is 50 feet)
IHC-INLINE2	Indoor Hanging Cradle For The Size 2 Untempered INLINE Unit. 2 HSA125 Hanging Isolators per Uni-Strut Included.
Show parts
	UNIVERSAL STRUT [8 used]	1-5/8"W x 2-7/16"D 12ga Uni-strut with yellow dichromate finish for mua hanging cradle. Per foot price.
	HSA125 [4 used]	Isolation spring with 125lbs resistance, 1.33" rated deflection, for hanging installation. Color, Brown
OPPSIDE-S-CTRLS	Mount motor and disconnect on opposite side of fan.
CVOUTLET	GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
Full Crating for Untempered Fan	Full crating for untempered fans for shipping.
SPO15-Enamel	Tan Enamel Coating For 15" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.