Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

IN-1-15D Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

.5018OT3E56-S48PP 0.500 3 208-220-230/380/460 V 1.9-1.7-1.7/0.9/0.9 0.625" 56 20 lbs 1730 WEG

ODP (Open Drip Proof)

Show parts

H-5/8	5/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 5/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.5018OT3E56-S48PP-50HZ 0.500 3 190/220/380/415 V 1.9/1.8/1/1 0.625" 56 20 lbs 1400 WEG

ODP (Open Drip Proof)

Show parts

H-5/8	5/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 5/8" Shaft Diameter.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.7518OT3E56-S48PP 0.750 3 208-220-230/380/460 V 2.5-2.3-2.3/1.3/1.1 0.625" 56 24 lbs 1735 WEG

ODP (Open Drip Proof)

Show parts

H-5/8	5/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 5/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.7518OT3E56-S48PP-50Hz 0.750 3 190/220-230/380/415 V 2.6/2.4-2.9/1.3/1.3 0.625" 56 29 lbs 1410 WEG

ODP (Open Drip Proof)

Show parts

H-5/8	5/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 5/8" Shaft Diameter.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0014 1.000 3 208-230/460 V 3.1-2.8/1.4 0.875" 143 35 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0014-50HZ 1.000 3 190/208-220/380/415 V 3.2/2.9-2.8/1.6/1.5 0.875" 143 35 lbs 1429 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0016 1.000 3 208-230/380/460 V 3.8-3.4/1.9/1.7 0.875" 145T 36 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP1/54 1.500 3 190/208-230/380/460 V 4.6/4.4-4/2.3/2 0.875" 145 46 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP1/54-50HZ 1.500 3 190/208/380/415 V 4.7/4.4/2.3/2.3 0.875" 145 46 lbs 1426 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0022 2.000 3 208-230/460 V 5.4-4.9/2.4 0.875" 145T 44 lbs 3600 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0024 2.000 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0024-50HZ 2.000 3 190/220/380 V 6.5/5.5/3.2 0.875" 145T 44 lbs 1415 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

BMN48-750I2-ES-M52-CA1-E-60-230/277 1.000 1 208-230-277 V 6.9-6.5-5.2 0.500" 48 16 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
MTRADP145T-48	Motor Adapter Plate Assembly for using 1/2HP & 1HP EC motors (48 frame) on USBI11-13DD and CASRE13DD.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	277 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

BMN48-750I1-ES-M52-CA1-E-60-115 1.000 1 115 V 11.6 0.500" 48 16 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-1/2	1/2" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1/2" Shaft Diameter.
MTRADP145T-48	Motor Adapter Plate Assembly for using 1/2HP & 1HP EC motors (48 frame) on USBI11-13DD and CASRE13DD.

100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00118ET3H143T-W22 1.000 3 575 V 1.2 0.875" 143T 48 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0014-50 1.000 3 190/380/400 V 3.2/1.6/1.5 0.875" L143T 36 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0014 1.000 3 200-208-230/400/460 V 2.9-3-2.7/1.4/1.3 0.875" L143T 36 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP1/54-50 1.500 3 190/380 V 4.8/2.4 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP1/54 1.500 3 190/200-208-230/380/400/460 V 4.3/4.3-4.5-4/2.1/2.1/2.1 0.875" 145T 40 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00158ET3H145T-W22 1.500 3 575 V 1.6 0.875" 145T 53 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218ET3H145T-W22 2.000 3 575 V 2.2 0.875" 145T 54 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0024 2.000 3 190/200-208-230/380/400/460 V 6/5.9-5.7-5.2/3/2.9/2.6 0.875" 145T 40 lbs 1740 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	200 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	400 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

GP0024-50 2.000 3 190/220/380 V 6.2/6.1/3.1 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
33008 [4 used]	A0003208 - 3/8" WASHERS
8003 [3 used]	CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
MLIFTL [4 used]	LIFTING LUG
F5020015MUSBI [1 used]	USBI15 - Spun Inlet.
800113-D80 [6 used]	Motor Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black with Marking) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 80
F8010015H-B-MF [1 used]	Mixed Flow Wheel Assembly (size 15) 11 5/8" Dia. Top. X 11 5/8" Dia. Ins. Bottom X 7 19/32" Height. Uses 6" Ø B Hub with H Bushings. *Requires H type split taper bushing if ordered as a replacement part.
11626-03224 [4 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
5/16-18 WHIZNUT [8 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
8002 [8 used]	CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
17916 [10 used]	GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)
INSULATION/sq ft [20 used]	INSULATION (Price per Sq Foot)
104778 [1 used]	SEALANT - 10.3 oz Silicone Silver/Aluminum Sealant. 350 deg silicone used in hoods. (item #104778)
90272A836 [8 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555
90272A829 [4 used]	Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length
MANUAL UNTEMP [1 used]	Manual for Commercial Supply Fan
9154 [1 used]	MV EZ Kleen Metal Mesh Filter. 16"x 20"x 2" Used for heater and supply fan intakes. (3412)
SB6-4-RIVET [104 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234 [10 used]	SHEET METAL SCREWS 12-14 X 3/4"
M1EFLS [2 used]	1 END FLASHING
B1DDBAVP [1 used]	AHU 1 Direct Drive Blower Assembly Venturi Plate
B1DDC [1 used]	AHU 1 Direct Drive Discharge Collar
B1DDINL [1 used]	AHU 1 Direct Drive Down Discharge Inline Bottom Liner
B1DDWG [1 used]	AHU 1 Direct Drive Wheel Guard
B1LIDDPRL [1 used]	AHU 1 LID w/Intergrated Drip Rail
B1SDBKHDD [1 used]	AHU 1 Side Discharge Back Hinged Direct Drive
B1DDMM [1 used]	AHU1 Direct Drive Motor Mount
B1DDMMS [1 used]	AHU1 Direct Drive Motor Mount Support
ME12MR [2 used]	EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.
M1HSUP [3 used]	HORIZONTAL SUPPORT
B1NSID [2 used]	Inline-G10 FilTER SIDE
B1NTOP [1 used]	Inline-G10 Filter Top

Options

Part
ECM Wiring Package-RTC	ECM Wiring Package - DD Supply - Manual or 0-10VDC Reference Speed Control (TELCO Motor)
ECM Wiring Package-ECPM03	ECM Wiring Package - DD Supply - PWM Signal from ECPMO3 Prewire (TELCO Motor)
Show parts
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
IHC-INLINE1	Indoor Hanging Cradle For The Size 1 Untempered INLINE Unit. 2 HSA125 Hanging Isolators per Uni-Strut Included.
Show parts
	UNIVERSAL STRUT [6 used]	1-5/8"W x 2-7/16"D 12ga Uni-strut with yellow dichromate finish for mua hanging cradle. Per foot price.
	HSA125 [4 used]	Isolation spring with 125lbs resistance, 1.33" rated deflection, for hanging installation. Color, Brown
OPPSIDE-S-CTRLS	Mount motor and disconnect on opposite side of fan.
CVOUTLET	GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
Full Crating for Untempered Fan	Full crating for untempered fans for shipping.
SPO10-Enamel	Tan Enamel Coating For 10" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.