Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

T76 Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

CK48HB06K01-60HZ 0.250 1 115/208-230 V 4.5/2.5-2.3 0.500" 48 21 lbs 1735 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB06K01-50HZ 0.250 1 220 V 2.6 0.500" 48 21 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB07J01-50HZ 0.333 1 220 V 3.3 0.500" 48 23 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB07J01-60HZ 0.333 1 115/208-230 V 5.8/3.2-2.9 0.500" 48 23 lbs 1735 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.5018OT3E56-S48PP 0.500 3 208-220-230/380/460 V 1.9-1.7-1.7/0.9/0.9 0.625" 56 20 lbs 1730 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.5018OT3E56-S48PP-50HZ 0.500 3 190/220/380/415 V 1.9/1.8/1/1 0.625" 56 20 lbs 1400 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB06H01-60HZ 0.500 1 115/208-230 V 7.6/4.2-3.8 0.625" 56 26 lbs 1730 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK48HB06H01-50HZ 0.500 1 220 V 4.3 0.625" 56 26 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

G065B 0.500 3 575 V 0.8 0.625" 56 30 lbs 1725 Mimco/TECO

ODP (Open Drip Proof) Pulleys

Show parts

D76CAP	CAP FOR D76 HEATER. Use D76CAPM for units with single phase motors.
D76CAPM	EXTENDEDCAP FOR D76 HEATER. Used with single phase motors.

100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK56HB02F01-60HZ 0.750 1 115/208-230 V 6/3.3-3 0.625" 56 34 lbs 1750 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.7518OT3E56-S48PP-50Hz 0.750 3 190/220-230/380/415 V 2.6/2.4-2.9/1.3/1.3 0.625" 56 29 lbs 1410 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

.7518OT3E56-S48PP 0.750 3 208-220-230/380/460 V 2.5-2.3-2.3/1.3/1.1 0.625" 56 24 lbs 1735 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00118OT3E56-S48PP 1.000 3 208-220-230/380/460 V 3.4-3.9-3.1/1.9/1.5 0.625" 56 26 lbs 1720 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK56HB02D01-60HZ 1.000 1 115/208-220-230 V 8.1/4.4-4.1-4 0.625" 56 39 lbs 1750 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00158OT3E56-S48PP-50HZ 1.500 3 190/220/380/415 V 5.1/4.8/2.5/2.5 0.625" 56 31 lbs 1430 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218OT3E56Z-S48PP-50HZ 1.500 3 190/220/380/415 V 6.5/5.7/3.2/3 0.875" 56HZ 40 lbs 1400 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00158OT3E56-S48PP 1.500 3 208-220-230/380/460 V 4.6-4.2-4.2/2.4/2.1 0.625" 56 31 lbs 1710 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	220 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

CK56HB02B01-60HZ 2.000 1 115/208-230 V 16.5/9.5-8.1 0.875" 56HZ 58 lbs 1750 HSSA

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218OT3E56Z-S48PP 2.000 3 208-230/415/460 V 5.9-5.3/3/2.6 0.875" 56 40 lbs 1700 WEG

ODP (Open Drip Proof) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	415 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0014 1.000 3 208-230/460 V 3.1-2.8/1.4 0.875" 143 35 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP1/54 1.500 3 190/208-230/380/460 V 4.6/4.4-4/2.3/2 0.875" 145 46 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00158OT3H145T-S 1.500 3 575 V 1.6 0.875" 145T 42 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00218OT3H145T-S 2.000 3 575 V 2.1 0.875" 145T 39 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

DTP0024 2.000 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO

ODP, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	190 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	380 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

C664V1 0.250 1 115/208-230 V 3.6/1.7-1.8 0.625" 56 16 lbs 1725 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

C223 0.333 1 115/208-230 V 5.2/2.6-2.5 0.625" 56 18 lbs 1725 PRECISION ELECTRIC MOTOR SALES

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C23D400	115 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

H868L 0.500 3 208-230/460 V 1.8-1.6/0.9 0.625" 56 18 lbs 1800 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

H869L 0.750 3 208-230/460 V 2.4-2.4/1.2 0.625" 56 20 lbs 1800 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts


100-C23D400	208 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	230 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

100-C23D400	460 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

00118ET3H143T-W22 1.000 3 575 V 1.2 0.875" 143T 48 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff. Pulleys

Show parts


100-C23D400	575 V	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. 4-pole (aux contact not present). Used only with Rockwell 193-T1A System Overloads. Used when switching 2 single phase motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Intakes & Intake Parts

Part

CD-I A1-76 Celdek Evaporative Cooler for Size # 1 Modular Un-tempered Supply Air unit. 26.75" Wide X 32.125" Long X 29.688" High. Includes Adapter for use with the D76 heater. For indoor installation. Min. water pressure for optimal performance is 30 PSI. Max. water pressure should not exceed 50 PSI. Use with water softener recommended.

Show parts

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE

[ 2 Used ]

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles

4568K171

[ 3 Used ]

1/2" NPT Brass Nipple. Used in Evaporative Cooler manifold piping. Also used on 1/2" Residential CORE Manifold

4882K13

[ 1 Used ]

1/2" x 1-1/4" PVC Close NPT Nipple

6-Smooth-NPT

[ 1 Used ]

1/2" x 6" Smooth to NPT PVC Nipple. Intalled in Size 1 and 2 evap quick seal.

1D76ADP

[ 1 Used ]

Adapter Plate used to attach a size 1 Celdek Evaporative cooler to a D76 heater.

A7-10-351-20

[ 1 Used ]

Black Compression Handle Latch and Clasp

1/21THY-LFM20M34-PTI

[ 1 Used ]

Bronze Strainer. 1/2" NPT fittings on either end. 1/4" cap. 20 mesh

CD-24x20x12

[ 1 Used ]

Celdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.

EC125

[ 1 Used ]

Drain downspout for connection to evap cooler drain

E1CBOTTH

[ 1 Used ]

EC 1 BOTTOM, STAINLESS STEEL HInged Door

E1CDBST

[ 1 Used ]

EC 1 CELDEK BOTTOM SLIDE TRACK 14.25 x 26.28 x 20 GA.

E1CFBM

[ 1 Used ]

EC 1 CELDEK FRAME BOTTOM 14.00 x 26.00 x 20 GA.

E1CFSD

[ 2 Used ]

EC 1 CELDEK FRAME SIDE 13.94 x 21.94 x 20 GA.

E1CFTP

[ 2 Used ]

EC 1 CELDEK FRAME TOP 14.00 x 26.00 x 20 GA.

E1CLSD

[ 1 Used ]

EC 1 CELDEK LEFT SIDE 27.00 x 39.00 x 20 GA.

E1CDMANCV

[ 1 Used ]

EC 1 CELDEK MANIFOLD COVER

E1CDTPMAN

[ 1 Used ]

EC 1 CELDEK TOP MANIFOLD

E1CDTS

[ 1 Used ]

EC 1 CELDEK TOP SHIELD

E1LIDD

[ 1 Used ]

EC 1 LID

E1RRDJ

[ 1 Used ]

EC 1 RIGHT REAR DOOR JAM

ME12MR

[ 2 Used ]

EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.

ME15SM

[ 1 Used ]

EC 1-5 Float sensor mounting bracket GALV20GA

MEC15SB

[ 2 Used ]

EC CELDEK 1-5 SPRAYBAR BRACKET

MEEBRD

[ 1 Used ]

EC ELECTRIC BOARD 14X6 GALV18GA

MEECAP

[ 1 Used ]

EC ELECTRIC CABINENT CAP

CC214-CC929 w/ anti-drip

[ 6 Used ]

EVAP COOLER NOZZLE - .6 GPH Red Spray Anti-Drip Nozzle with CC-929 Filter for front face Celdek manifold spraybars.

CC213-CC929

[ 6 Used ]

EVAP COOLER NOZZLE - 2 GPH Black Spray Nozzle with CC-929 Filter. Comes pre-wrapped with 7 wraps of teflon.

4429K163

[ 1 Used ]

Female 90 Degree Brass Elbow, Pipe/Thread Size 1/2"

P-50-1010

[ 1 Used ]

Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.

FS3201-207

[ 1 Used ]

Liquid level sensor - Float switch for standard evap & celdek evap. Hardware Specifications: 1/8" NPT. 6ft wire leads. (REPLACES PART AQ5510)

EC130

[ 1 Used ]

P-Trap assembly for evaporative coolers

171

[ 1 Used ]

QUIK SEAL - Quick Seal 1/2"

HG-OTA100

[ 2 Used ]

Removable Door Hinge used on Pollution Control Units and KB Blowers

SB6-4-RIVET

[ 115 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

EC136

[ 1 Used ]

Schedule 80 1/2" PVC NPT Elbow

EC105

[ 6 Used ]

Schedule 80 1/2" PVC Smooth elbow

EC110

[ 3 Used ]

Schedule 80 1/2" PVC Smooth TEE

EC111

[ 1 Used ]

Schedule 80 1/2" PVC Threaded Union used in evaporative cooler piping manifold

EC100

[ 86 Used ]

Schedule 80 PVC 1/2" Piping (1" length)

EC131

[ 1 Used ]

Schedule 80 PVC Smooth to Male MPT connector 1/2" X 4 1/2" Nipple.

EC240A

[ 1 Used ]

SOLENOID CONNECTOR - Cable Solenoid Connector with 3' Pigtail 3 Conductor Jacket. Old part# CZ2-01. EC240 Approved replacement part: CM1 N02 VL2 B02

EC120

[ 1 Used ]

Stainless Steel Drain with seal for evaporative coolers

L180B333Z610A

[ 1 Used ]

VALVE - 1/2" Water Valve, 110 VAC Solenoid. Used on evaporative cooler. Sirai equivalent = L182B03-ZB10A. Jefferson Valve equivalent =2036BA04T

90272A836

[ 4 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555

90272A829

[ 2 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length

IN-I-D76 Inline EZ Filter - 9154 MV EZ Kleen Metal Mesh Filter. 16"x 20"x 2"

Show parts

800026

[ 2 Used ]

A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc

17916

[ 5 Used ]

GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)

9154

[ 1 Used ]

MV EZ Kleen Metal Mesh Filter. 16"x 20"x 2" Used for heater and supply fan intakes. (3412)

STS1643035

[ 2 Used ]

Profile Plate Spring and Hinge used on Size 2 and 3 commercial direct fired heaters.

SB6-4-RIVET

[ 24 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

ITH41234

[ 16 Used ]

SHEET METAL SCREWS 12-14 X 3/4"

IN-I-D76-TA Inline for Size # 1 Compact Heater. For indoor installation. MERV 8 Filters

Show parts

800026

[ 2 Used ]

A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc

TA 16X20X2

[ 1 Used ]

Filter throw away 16" x 20" x 2". MERV 8. (DP40)

17916

[ 5 Used ]

GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)

STS1643035

[ 2 Used ]

Profile Plate Spring and Hinge used on Size 2 and 3 commercial direct fired heaters.

SB6-4-RIVET

[ 24 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

ITH41234

[ 16 Used ]

SHEET METAL SCREWS 12-14 X 3/4"

IN-I-D76-TA-13 Inline for Size # 1 Compact Heater. For indoor installation. MERV 13 Filters

Show parts

800026

[ 2 Used ]

A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc

17916

[ 5 Used ]

GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)

STS1643035

[ 2 Used ]

Profile Plate Spring and Hinge used on Size 2 and 3 commercial direct fired heaters.

SB6-4-RIVET

[ 24 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

ITH41234

[ 16 Used ]

SHEET METAL SCREWS 12-14 X 3/4"

DP13-STD2-201

[ 1 Used ]

Throw away filter 16wx20hx2d, MERV13 rating, 1120 max cfm.

SFIH-D76 Screen Intake Hood with EZ Filter. Includes filter and filter box.

Show parts

800026

[ 2 Used ]

A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc

17916

[ 10 Used ]

GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)

9154

[ 1 Used ]

MV EZ Kleen Metal Mesh Filter. 16"x 20"x 2" Used for heater and supply fan intakes. (3412)

STS1643035

[ 3 Used ]

Profile Plate Spring and Hinge used on Size 2 and 3 commercial direct fired heaters.

SB6-4-RIVET

[ 56 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

EXPAD76

[ 1 Used ]

Screen for a D76 Screen Intake 27.063 x 14.5

ITH41234

[ 14 Used ]

SHEET METAL SCREWS 12-14 X 3/4"

CD-O A1-76 Size # 1 Celdek Evaporative Cooler for Compact Direct-fired Heater Unit. 26.75" Wide X 54.5" Long X 36.688" High. Includes screened intake. For outdoor installation. Use with water softener recommended.

Show parts

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE

[ 1 Used ]

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles

4568K171

[ 3 Used ]

1/2" NPT Brass Nipple. Used in Evaporative Cooler manifold piping. Also used on 1/2" Residential CORE Manifold

4882K13

[ 1 Used ]

1/2" x 1-1/4" PVC Close NPT Nipple

6-Smooth-NPT

[ 1 Used ]

1/2" x 6" Smooth to NPT PVC Nipple. Intalled in Size 1 and 2 evap quick seal.

1D76ADP

[ 1 Used ]

Adapter Plate used to attach a size 1 Celdek Evaporative cooler to a D76 heater.

A7-10-351-20

[ 1 Used ]

Black Compression Handle Latch and Clasp

1/21THY-LFM20M34-PTI

[ 1 Used ]

Bronze Strainer. 1/2" NPT fittings on either end. 1/4" cap. 20 mesh

CD-24x20x12

[ 1 Used ]

Celdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.

EC125

[ 1 Used ]

Drain downspout for connection to evap cooler drain

E1CBOTTH

[ 1 Used ]

EC 1 BOTTOM, STAINLESS STEEL HInged Door

E1CDBST

[ 1 Used ]

EC 1 CELDEK BOTTOM SLIDE TRACK 14.25 x 26.28 x 20 GA.

E1CFBM

[ 1 Used ]

EC 1 CELDEK FRAME BOTTOM 14.00 x 26.00 x 20 GA.

E1CFSD

[ 2 Used ]

EC 1 CELDEK FRAME SIDE 13.94 x 21.94 x 20 GA.

E1CDMANCV

[ 1 Used ]

EC 1 CELDEK MANIFOLD COVER

E1CDTPMAN

[ 1 Used ]

EC 1 CELDEK TOP MANIFOLD

E1CDTS

[ 1 Used ]

EC 1 CELDEK TOP SHIELD

E1LIDD

[ 1 Used ]

EC 1 LID

ME12MR

[ 2 Used ]

EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.

ME15SM

[ 1 Used ]

EC 1-5 Float sensor mounting bracket GALV20GA

MEC15SB

[ 1 Used ]

EC CELDEK 1-5 SPRAYBAR BRACKET

MEEBRD

[ 1 Used ]

EC ELECTRIC BOARD 14X6 GALV18GA

MEECAP

[ 1 Used ]

EC ELECTRIC CABINENT CAP

CC214-CC929 w/ anti-drip

[ 6 Used ]

EVAP COOLER NOZZLE - .6 GPH Red Spray Anti-Drip Nozzle with CC-929 Filter for front face Celdek manifold spraybars.

CC213-CC929

[ 6 Used ]

EVAP COOLER NOZZLE - 2 GPH Black Spray Nozzle with CC-929 Filter. Comes pre-wrapped with 7 wraps of teflon.

4429K163

[ 1 Used ]

Female 90 Degree Brass Elbow, Pipe/Thread Size 1/2"

P-50-1010

[ 1 Used ]

Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.

FS3201-207

[ 1 Used ]

Liquid level sensor - Float switch for standard evap & celdek evap. Hardware Specifications: 1/8" NPT. 6ft wire leads. (REPLACES PART AQ5510)

EC130

[ 1 Used ]

P-Trap assembly for evaporative coolers

171

[ 1 Used ]

QUIK SEAL - Quick Seal 1/2"

HG-OTA100

[ 2 Used ]

Removable Door Hinge used on Pollution Control Units and KB Blowers

SB6-4-RIVET

[ 135 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

EC136

[ 1 Used ]

Schedule 80 1/2" PVC NPT Elbow

EC105

[ 6 Used ]

Schedule 80 1/2" PVC Smooth elbow

EC110

[ 3 Used ]

Schedule 80 1/2" PVC Smooth TEE

EC111

[ 1 Used ]

Schedule 80 1/2" PVC Threaded Union used in evaporative cooler piping manifold

EC100

[ 86 Used ]

Schedule 80 PVC 1/2" Piping (1" length)

EC131

[ 1 Used ]

Schedule 80 PVC Smooth to Male MPT connector 1/2" X 4 1/2" Nipple.

EC240A

[ 1 Used ]

SOLENOID CONNECTOR - Cable Solenoid Connector with 3' Pigtail 3 Conductor Jacket. Old part# CZ2-01. EC240 Approved replacement part: CM1 N02 VL2 B02

EC120

[ 1 Used ]

Stainless Steel Drain with seal for evaporative coolers

L180B333Z610A

[ 1 Used ]

VALVE - 1/2" Water Valve, 110 VAC Solenoid. Used on evaporative cooler. Sirai equivalent = L182B03-ZB10A. Jefferson Valve equivalent =2036BA04T

90272A836

[ 4 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555

90272A829

[ 2 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length

CD-O A1-NF-76 Size # 1 Celdek Evaporative Cooler for Compact Direct-fired Heater Unit. 26.75" Wide X 76.438" Long X 36.688" High. Includes intake hood without filters. For outdoor installation. Use with water softener recommended.

Show parts

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE

[ 2 Used ]

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles

4568K171

[ 3 Used ]

1/2" NPT Brass Nipple. Used in Evaporative Cooler manifold piping. Also used on 1/2" Residential CORE Manifold

4882K13

[ 1 Used ]

1/2" x 1-1/4" PVC Close NPT Nipple

6-Smooth-NPT

[ 1 Used ]

1/2" x 6" Smooth to NPT PVC Nipple. Intalled in Size 1 and 2 evap quick seal.

A1ISCN

[ 1 Used ]

A 1 BIRD SCREEN 48X21.75 EXPANDED

A1FBOT

[ 1 Used ]

A 1 FILTER BOTTOM 22 X 6 20GA

A1GUTT

[ 1 Used ]

A 1 GUTTER

A1TOPP

[ 1 Used ]

A1 FA TOP (3 PIECE) 20 GA 44.875X21.821

A1LSID

[ 1 Used ]

A1LSID A1 FA SIDE (LH) (3 PIECE) 43.625 X 21 20 GA

A1RSID

[ 1 Used ]

A1RSID A1 FA SIDE (RH) (3 PIECE) 43.625 X 21 20GA

1D76ADP

[ 1 Used ]

Adapter Plate used to attach a size 1 Celdek Evaporative cooler to a D76 heater.

A7-10-351-20

[ 1 Used ]

Black Compression Handle Latch and Clasp

1/21THY-LFM20M34-PTI

[ 1 Used ]

Bronze Strainer. 1/2" NPT fittings on either end. 1/4" cap. 20 mesh

CD-24x20x12

[ 1 Used ]

Celdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.

EC125

[ 1 Used ]

Drain downspout for connection to evap cooler drain

E1CBOTTH

[ 1 Used ]

EC 1 BOTTOM, STAINLESS STEEL HInged Door

E1CDBST

[ 1 Used ]

EC 1 CELDEK BOTTOM SLIDE TRACK 14.25 x 26.28 x 20 GA.

E1CFBM

[ 1 Used ]

EC 1 CELDEK FRAME BOTTOM 14.00 x 26.00 x 20 GA.

E1CFSD

[ 2 Used ]

EC 1 CELDEK FRAME SIDE 13.94 x 21.94 x 20 GA.

E1CDMANCV

[ 1 Used ]

EC 1 CELDEK MANIFOLD COVER

E1CDTPMAN

[ 1 Used ]

EC 1 CELDEK TOP MANIFOLD

E1CDTS

[ 1 Used ]

EC 1 CELDEK TOP SHIELD

E1LIDD

[ 1 Used ]

EC 1 LID

E1RTFP

[ 1 Used ]

EC 1 RIGHT FRONT POST

ME12MR

[ 2 Used ]

EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.

ME15SM

[ 1 Used ]

EC 1-5 Float sensor mounting bracket GALV20GA

MEC15SB

[ 1 Used ]

EC CELDEK 1-5 SPRAYBAR BRACKET

MEEBRD

[ 1 Used ]

EC ELECTRIC BOARD 14X6 GALV18GA

MEECAP

[ 1 Used ]

EC ELECTRIC CABINENT CAP

CC214-CC929 w/ anti-drip

[ 86 Used ]

EVAP COOLER NOZZLE - .6 GPH Red Spray Anti-Drip Nozzle with CC-929 Filter for front face Celdek manifold spraybars.

CC213-CC929

[ 6 Used ]

EVAP COOLER NOZZLE - 2 GPH Black Spray Nozzle with CC-929 Filter. Comes pre-wrapped with 7 wraps of teflon.

4429K163

[ 1 Used ]

Female 90 Degree Brass Elbow, Pipe/Thread Size 1/2"

P-50-1010

[ 1 Used ]

Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.

FS3201-207

[ 1 Used ]

Liquid level sensor - Float switch for standard evap & celdek evap. Hardware Specifications: 1/8" NPT. 6ft wire leads. (REPLACES PART AQ5510)

EC130

[ 1 Used ]

P-Trap assembly for evaporative coolers

171

[ 1 Used ]

QUIK SEAL - Quick Seal 1/2"

HG-OTA100

[ 2 Used ]

Removable Door Hinge used on Pollution Control Units and KB Blowers

SB6-4-RIVET

[ 135 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

EC136

[ 1 Used ]

Schedule 80 1/2" PVC NPT Elbow

EC105

[ 6 Used ]

Schedule 80 1/2" PVC Smooth elbow

EC110

[ 3 Used ]

Schedule 80 1/2" PVC Smooth TEE

EC111

[ 1 Used ]

Schedule 80 1/2" PVC Threaded Union used in evaporative cooler piping manifold

EC100

[ 86 Used ]

Schedule 80 PVC 1/2" Piping (1" length)

EC131

[ 1 Used ]

Schedule 80 PVC Smooth to Male MPT connector 1/2" X 4 1/2" Nipple.

EC240A

[ 1 Used ]

SOLENOID CONNECTOR - Cable Solenoid Connector with 3' Pigtail 3 Conductor Jacket. Old part# CZ2-01. EC240 Approved replacement part: CM1 N02 VL2 B02

EC120

[ 1 Used ]

Stainless Steel Drain with seal for evaporative coolers

L180B333Z610A

[ 1 Used ]

VALVE - 1/2" Water Valve, 110 VAC Solenoid. Used on evaporative cooler. Sirai equivalent = L182B03-ZB10A. Jefferson Valve equivalent =2036BA04T

90272A836

[ 4 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555

90272A829

[ 2 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length

CD-O A1-76-IL Size # 1 Celdek Evaporative Cooler for Compact Direct-fired Heater Unit. 26.75" Wide X 54.5" Long X 36.688" High. Includes intake louver. For outdoor installation. Use with water softener recommended.

Show parts

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE

[ 1 Used ]

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles

4568K171

[ 3 Used ]

1/2" NPT Brass Nipple. Used in Evaporative Cooler manifold piping. Also used on 1/2" Residential CORE Manifold

4882K13

[ 1 Used ]

1/2" x 1-1/4" PVC Close NPT Nipple

6-Smooth-NPT

[ 1 Used ]

1/2" x 6" Smooth to NPT PVC Nipple. Intalled in Size 1 and 2 evap quick seal.

1D76ADP

[ 1 Used ]

Adapter Plate used to attach a size 1 Celdek Evaporative cooler to a D76 heater.

A7-10-351-20

[ 1 Used ]

Black Compression Handle Latch and Clasp

1/21THY-LFM20M34-PTI

[ 1 Used ]

Bronze Strainer. 1/2" NPT fittings on either end. 1/4" cap. 20 mesh

CD-24x20x12

[ 1 Used ]

Celdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.

EC125

[ 1 Used ]

Drain downspout for connection to evap cooler drain

E1CBOTTH

[ 1 Used ]

EC 1 BOTTOM, STAINLESS STEEL HInged Door

E1CDBST

[ 1 Used ]

EC 1 CELDEK BOTTOM SLIDE TRACK 14.25 x 26.28 x 20 GA.

E1CFBM

[ 1 Used ]

EC 1 CELDEK FRAME BOTTOM 14.00 x 26.00 x 20 GA.

E1CFSD

[ 2 Used ]

EC 1 CELDEK FRAME SIDE 13.94 x 21.94 x 20 GA.

E1CDMANCV

[ 1 Used ]

EC 1 CELDEK MANIFOLD COVER

E1CDTPMAN

[ 1 Used ]

EC 1 CELDEK TOP MANIFOLD

E1CDTS

[ 1 Used ]

EC 1 CELDEK TOP SHIELD

E1LIDD

[ 1 Used ]

EC 1 LID

ME12MR

[ 2 Used ]

EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.

ME15SM

[ 1 Used ]

EC 1-5 Float sensor mounting bracket GALV20GA

MEC15SB

[ 1 Used ]

EC CELDEK 1-5 SPRAYBAR BRACKET

MEEBRD

[ 1 Used ]

EC ELECTRIC BOARD 14X6 GALV18GA

MEECAP

[ 1 Used ]

EC ELECTRIC CABINENT CAP

CC214-CC929 w/ anti-drip

[ 6 Used ]

EVAP COOLER NOZZLE - .6 GPH Red Spray Anti-Drip Nozzle with CC-929 Filter for front face Celdek manifold spraybars.

CC213-CC929

[ 6 Used ]

EVAP COOLER NOZZLE - 2 GPH Black Spray Nozzle with CC-929 Filter. Comes pre-wrapped with 7 wraps of teflon.

4429K163

[ 1 Used ]

Female 90 Degree Brass Elbow, Pipe/Thread Size 1/2"

P-50-1010

[ 1 Used ]

Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.

FS3201-207

[ 1 Used ]

Liquid level sensor - Float switch for standard evap & celdek evap. Hardware Specifications: 1/8" NPT. 6ft wire leads. (REPLACES PART AQ5510)

EC130

[ 1 Used ]

P-Trap assembly for evaporative coolers

171

[ 1 Used ]

QUIK SEAL - Quick Seal 1/2"

HG-OTA100

[ 2 Used ]

Removable Door Hinge used on Pollution Control Units and KB Blowers

SB6-4-RIVET

[ 135 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

EC136

[ 1 Used ]

Schedule 80 1/2" PVC NPT Elbow

EC105

[ 6 Used ]

Schedule 80 1/2" PVC Smooth elbow

EC110

[ 3 Used ]

Schedule 80 1/2" PVC Smooth TEE

EC111

[ 1 Used ]

Schedule 80 1/2" PVC Threaded Union used in evaporative cooler piping manifold

EC100

[ 86 Used ]

Schedule 80 PVC 1/2" Piping (1" length)

EC131

[ 1 Used ]

Schedule 80 PVC Smooth to Male MPT connector 1/2" X 4 1/2" Nipple.

800023B

[ 22 Used ]

Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

EC240A

[ 1 Used ]

SOLENOID CONNECTOR - Cable Solenoid Connector with 3' Pigtail 3 Conductor Jacket. Old part# CZ2-01. EC240 Approved replacement part: CM1 N02 VL2 B02

EC120

[ 1 Used ]

Stainless Steel Drain with seal for evaporative coolers

L180B333Z610A

[ 1 Used ]

VALVE - 1/2" Water Valve, 110 VAC Solenoid. Used on evaporative cooler. Sirai equivalent = L182B03-ZB10A. Jefferson Valve equivalent =2036BA04T

90272A836

[ 4 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555

90272A829

[ 2 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length

CD-O A1-IH-76 Size # 1 Celdek Evaporative Cooler for Compact Direct-fired Heater. 26.75" Wide X 76.438" Long X 29.688" High. Includes intake hood with filters. For outdoor installation. Use with water softener recommeneded.

Show parts

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE

[ 2 Used ]

SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles

4568K171

[ 3 Used ]

1/2" NPT Brass Nipple. Used in Evaporative Cooler manifold piping. Also used on 1/2" Residential CORE Manifold

4882K13

[ 1 Used ]

1/2" x 1-1/4" PVC Close NPT Nipple

6-Smooth-NPT

[ 1 Used ]

1/2" x 6" Smooth to NPT PVC Nipple. Intalled in Size 1 and 2 evap quick seal.

A1ISCN

[ 1 Used ]

A 1 BIRD SCREEN 48X21.75 EXPANDED

A1FBOT

[ 1 Used ]

A 1 FILTER BOTTOM 22 X 6 20GA

A1GUTT

[ 1 Used ]

A 1 GUTTER

A1TOPP

[ 1 Used ]

A1 FA TOP (3 PIECE) 20 GA 44.875X21.821

A1LSID

[ 1 Used ]

A1LSID A1 FA SIDE (LH) (3 PIECE) 43.625 X 21 20 GA

A1RSID

[ 1 Used ]

A1RSID A1 FA SIDE (RH) (3 PIECE) 43.625 X 21 20GA

1D76ADP

[ 1 Used ]

Adapter Plate used to attach a size 1 Celdek Evaporative cooler to a D76 heater.

A7-10-351-20

[ 1 Used ]

Black Compression Handle Latch and Clasp

1/21THY-LFM20M34-PTI

[ 1 Used ]

Bronze Strainer. 1/2" NPT fittings on either end. 1/4" cap. 20 mesh

CD-24x20x12

[ 1 Used ]

Celdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.

EC125

[ 1 Used ]

Drain downspout for connection to evap cooler drain

E1CBOTTH

[ 1 Used ]

EC 1 BOTTOM, STAINLESS STEEL HInged Door

E1CDBST

[ 1 Used ]

EC 1 CELDEK BOTTOM SLIDE TRACK 14.25 x 26.28 x 20 GA.

E1CFBM

[ 1 Used ]

EC 1 CELDEK FRAME BOTTOM 14.00 x 26.00 x 20 GA.

E1CFSD

[ 2 Used ]

EC 1 CELDEK FRAME SIDE 13.94 x 21.94 x 20 GA.

E1CDMANCV

[ 1 Used ]

EC 1 CELDEK MANIFOLD COVER

E1CDTPMAN

[ 1 Used ]

EC 1 CELDEK TOP MANIFOLD

E1CDTS

[ 1 Used ]

EC 1 CELDEK TOP SHIELD

E1LIDD

[ 1 Used ]

EC 1 LID

ME12MR

[ 2 Used ]

EC 1-2 MAIN RAIL 35.25X8 GALV14GA. Also used on Size 1 Blower.

ME15SM

[ 1 Used ]

EC 1-5 Float sensor mounting bracket GALV20GA

MEC15SB

[ 1 Used ]

EC CELDEK 1-5 SPRAYBAR BRACKET

MEEBRD

[ 1 Used ]

EC ELECTRIC BOARD 14X6 GALV18GA

MEECAP

[ 1 Used ]

EC ELECTRIC CABINENT CAP

CC214-CC929 w/ anti-drip

[ 6 Used ]

EVAP COOLER NOZZLE - .6 GPH Red Spray Anti-Drip Nozzle with CC-929 Filter for front face Celdek manifold spraybars.

CC213-CC929

[ 6 Used ]

EVAP COOLER NOZZLE - 2 GPH Black Spray Nozzle with CC-929 Filter. Comes pre-wrapped with 7 wraps of teflon.

4429K163

[ 1 Used ]

Female 90 Degree Brass Elbow, Pipe/Thread Size 1/2"

P-50-1010

[ 1 Used ]

Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.

FS3201-207

[ 1 Used ]

Liquid level sensor - Float switch for standard evap & celdek evap. Hardware Specifications: 1/8" NPT. 6ft wire leads. (REPLACES PART AQ5510)

9154

[ 3 Used ]

MV EZ Kleen Metal Mesh Filter. 16"x 20"x 2" Used for heater and supply fan intakes. (3412)

EC130

[ 1 Used ]

P-Trap assembly for evaporative coolers

171

[ 1 Used ]

QUIK SEAL - Quick Seal 1/2"

HG-OTA100

[ 2 Used ]

Removable Door Hinge used on Pollution Control Units and KB Blowers

SB6-4-RIVET

[ 135 Used ]

RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.

EC136

[ 1 Used ]

Schedule 80 1/2" PVC NPT Elbow

EC105

[ 6 Used ]

Schedule 80 1/2" PVC Smooth elbow

EC110

[ 3 Used ]

Schedule 80 1/2" PVC Smooth TEE

EC111

[ 1 Used ]

Schedule 80 1/2" PVC Threaded Union used in evaporative cooler piping manifold

EC100

[ 86 Used ]

Schedule 80 PVC 1/2" Piping (1" length)

EC131

[ 1 Used ]

Schedule 80 PVC Smooth to Male MPT connector 1/2" X 4 1/2" Nipple.

EC240A

[ 1 Used ]

SOLENOID CONNECTOR - Cable Solenoid Connector with 3' Pigtail 3 Conductor Jacket. Old part# CZ2-01. EC240 Approved replacement part: CM1 N02 VL2 B02

EC120

[ 1 Used ]

Stainless Steel Drain with seal for evaporative coolers

L180B333Z610A

[ 1 Used ]

VALVE - 1/2" Water Valve, 110 VAC Solenoid. Used on evaporative cooler. Sirai equivalent = L182B03-ZB10A. Jefferson Valve equivalent =2036BA04T

90272A836

[ 4 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1-1/2" Length Old AX # A0026555

90272A829

[ 2 Used ]

Zinc-Plated Steel Pan Head Phillips Machine Screw, 10-32 Thread, 1/2" Length

Temperature Controls

No Temperature Controls Found.

Gas Manifold Parts

No Gas Manifold Parts Found.

Blower

Part
G7	7" forward curved, centrifugal blower. Permanently lubricated ball bearings. Galvanized finish. 400-2000 CFM. 3/4" x 14-3/16" Shaft. 3600 max. RPM. Used in heated and non-heated supply fans.

Burner

Part

HMA-2A-6-A-D76 Direct-fired burner assembly. 275,000 BTU/HR Maximum, 13,000 BTU/HR Minimum. Aluminum Casting with SS Baffles. 6" long. Used in size 1 compact & commercial direct-fired heater. Used for both Natural and Propane Gas. "Brute" Pilot/Flame Rod/Spark Assembly included. Used in D76.

1190850
[1 used]

BURNER PART - "BRUTE" PILOT ASSEMBLY W/ SPARK & FLAME ROD. Pilot hole size is drill #50 (.070 diameter) (342B) (A0003270) Includes pack of boots and hardware. REPLACES 1190870

Replacement Parts

Part
8003 [4 used]	CONDUIT CONNECTOR - 90deg; 1/2" Bridgeport, 1/2" long thread
2020 [1 used]	High Voltage Label for Commercial MUA units.
G7BRACKET [1 used]	Motor Platform for G7 Blower
Scroll Plate [2 used]	Scroll Plate Angle Support for G7/G10/G12G15/G18 Blower Wheel - Ship With Mounting Hardware.
Common Heater Electrical Components
SU201M-K2 [1 used]	CIRCUIT BREAKER - 2 AMP Circuit Breaker Used for Commercial Heaters. Trip Curve 9. Old P/N S201U-K2
Controller&HMI
HMI_01_MUA_POPULATED [1 used]	HMI assembly. Preprogrammed for use with MUA Board. Includes CASHMI PCB, 4 mounting screws, 16 ga. SS backing plate, membrane switches & gasket. HMI should have populated RH sensor.
Direct Fired Air Movement Control Components
8164 [15 used]	1/4" Nylon Tubing - Used with the Modular Make-Up Air Units A1-D, A2-D, A3-D, A4-D, A5-D and the NHMUA1, NHMUA2, NHMUA3, AI (Price Per Foot). Type 12.
88130 [2 used]	1/4" Plastic Union Elbow for connecting airflow tubing to airflow probes (17045 & 17045A).
17045 [4 used]	Airflow Switch Components Cleveland Controls Airflow Probe 2".
Direct Fired Flame Control Components
35-630501-001 [1 used]	Fenwal Auto Ignition System. 24V, 60 Hz. Includes Spark generator and Flame Sensing. 15 sec. PTFI.
Direct Fired Sheet Metal Components
D76BPH [1 used]	BACK PLATE HORIZONTAL FOR D76 HEATER.
D76HBB [1 used]	BASE FOR D76 HEATER.
D76BLB [2 used]	BLOWER BRACE COLLAR FOR D76 HEATER.
D76BBR [2 used]	BLOWER BRACKET FOR D76 HEATER.
D76BUB [1 used]	BURNER BLANK FOR D76 HEATER.
D76CAP [1 used]	CAP FOR D76 HEATER. Use D76CAPM for units with single phase motors.
D76CPN [1 used]	CENTER POST (NO-SWITCH) FOR D76 HEATER.
D76CPSSW [1 used]	CENTER POST (SWITCH) FOR D76 HEATER, FOR USE WITH THE HUBBEL SWITCH.
MDBSUP [1 used]	DF BURNER SUPPORT 22X10 GALV14GA REV0
MDFRSD [1 used]	DF FLOOR HEAT SHIELD
D76DOF [2 used]	DOOR FRAME FOR D76 HEATER.
D76DOS [2 used]	DOOR NO LOUVERS (SMALL) FOR D76 HEATER.
D76DON [1 used]	DOOR NO LOUVERS FOR D76 HEATER.
D76DOL [1 used]	DOOR WITH LOUVERS FOR D76 HEATER.
D76ELB [1 used]	ELECTRIC CABINET BACK FOR D76 HEATER.
D76ELP [1 used]	ELECTRIC PLATE FOR D76 HEATER.
D76EXB [1 used]	EXHAUST BLANK FOR D76 HEATER.
D76HOS [2 used]	HORIZONTAL SUPPORT FOR D76 HEATER.
D76INC [1 used]	INSULATION CAP FOR D76 HEATER.
D76LCP [1 used]	LEFT CORNER POST FOR D76 HEATER.
D76PPA [1 used]	PROFILE PLATE PART "A" FOR D76 HEATER.
D76PPB [1 used]	PROFILE PLATE PART "B" FOR D76 HEATER.
D76RCP [1 used]	RIGHT CORNER POST FOR D76 HEATER.
D76SB [4 used]	SHIPPING BRACKET FOR D76 HEATER.
Disconnect Switch
WR74-C [1 used]	BELL BOX DISCONNECT SWITCH COVER
Exhaust Fan Whiz Nuts & Bolts
800043 [4 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
0120763.0800 [4 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
Exhaust Fan Wiring Options
8002 [12 used]	CONDUIT - 1/2" LT FLEX JIC. (Price per Foot)
8002A [4 used]	CONDUIT CONNECTORS - Straight 1/2" Liquid Tite - LT201
Miscellaneous Electrical Parts
CAT5_3FT [1 used]	3 Foot Long CAT5 Cable
8012A [1 used]	J-BOX - SWITCH BOX - CY X 1/2.
MUA Board [1 used]	Printed Circuit board for use in heaters. Used in conjunction with CAS HMI.
Miscellaneous Heater Components
NBB4000516 [2 used]	5/16" NUTS
NBB4000516 [4 used]	5/16" NUTS
WA4000516 [8 used]	5/16" WASHERS
17916 [11 used]	GASKETING - Weather Stripping w/PSA , Color Gray, 1/4" X 1" (Price per foot) (17916)
INSULATION/sq ft [25 used]	INSULATION (Price per Sq Foot)
STS1122 [2 used]	Profile Plate Spring and Hinge used on D76 low cfm commercial direct fired heaters. Use in place of STS1117.
1319 [1 used]	VIEWPORT - 2" Plastic Viewport Used on the Modular Make-Up Air Units A1-D, A2-D, A3-D, A4-D, A5-D and the NHMUA1, NHMUA2, NHMUA3 Units
RING TERMINAL [1 used]	Yellow, 12-10, size #10 ring terminal for spark ignition transformermers. .190 inner hole, .38 OD, vinyl insulated
Miscellaneous Hood Parts
SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - DOOR HANDLE [6 used]	SCREW 10-24X3/8 ZINC RD HD SLOTTED MS - Used on UC door handles and MUA door handles
P-50-1010 [3 used]	Handle for make up air doors, utility cabinet/ NSF fire door component. Also used for CELDEK Evap Cooler Media Frame.
Product Manuals
MANUAL D76 [1 used]	Manual for Compact Direct Fired Heater
Supply Fan Miscellaneous Parts
2T4000516040000 [2 used]	5/16" BOLTS 4" LONG
SB6-4-RIVET [89 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
ITH41234 [22 used]	SHEET METAL SCREWS 12-14 X 3/4"
Supply Fan Vibration Isolators
L1VIB [4 used]	Motor Frame Vibration Eliminator 1" Out. Dia. X 1/4" Tall, Rubber (Black) New Style, 5/16-18 x 1/2 dual studs. Durometer = 50
Transformers
BE161640GEK0018 [1 used]	TRANSFORMER - Low 40VA Voltage Transformer Used for 120v Primary and 24v Secondary.

Curbs

Part
CRB19.5X52X6INS	ROOF CURB - 19.5X52X6INS
CRB19.5X52X10INS	ROOF CURB - 19.5X52X10INS
CRB19.5X52X12INS	ROOF CURB - 19.5X52X12INS
CRB19.5X52X14INS	ROOF CURB - 19.5X52X14INS
CRB19.5X52X16INS	ROOF CURB - 19.5X52X16INS
CRB19.5X52X18INS	ROOF CURB - 19.5X52X18INS
CRB19.5X52X20INS	ROOF CURB - 19.5X52X20INS
CRB19.5X52X24INS	ROOF CURB - 19.5X52X24INS
CRB19.5X52X36INS	ROOF CURB - 19.5X52X36INS

Options

Part
6631T18	Combustible Gas and Carbon Monoxide Detector 120VAC input. On-Board 10A, 250V Relay and 85db Audible Alarm. 150ppm CO, 17ppm H2, 5000 ppm Methane, 35ppm Propane. (HIC-822). 10,000 cubic feet recommended coverage per detector.
CSMDTIL	Commercial Smoke Detector Interlock (Detector By Others)
D4120-DST-1.5-C	Duct Mounted Smoke Detector For Commercial Direct Fired Heater. Complete with detector (D4120) and sampling tube (DST-1.5). Ships Loose
Show parts
	D4120 [1 used]	Duct Mounted Smoke Detector For Direct Fired Heater. Air Velocity 100 to 4000 FPM, Humidity Range 0 to 95 Percentage RH, Current Consumption Alarm 125 Milliamps, Current Consumption Standby 21 Milliamps @ 24vdc, Alarm Auxiliary Contact Current @ 250 VAC 10 Amps, Alarm Auxiliary Contact Current @ 30 VDC 10 Amps, Ambient Temperature Limit -4 to 158 Degrees Fahrenheit, Photoelectric, Base.
	DST-1.5 [1 used]	Duct Mounted Smoke Detector Sampling Tube, Duct Width 1 to 2 Feet, Metal, For Duct Mounted Smoke Detector, used with D4120 Detector.
CTR-CC	DX Cooling Intake Air Thermostat and Relays Mounted in Unit - Set Point For Thermostat Should Be 85°F.
Show parts
	T678A1361 [1 used]	On/off stat two stage - Used with drain and fill evaporative cooler option. 20' capillary length, 55-175 degree range, 3.6 to 12 degree adjustable differential. Also used as cooling interlock thermostat.
	34.110.0184.0 [2 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [2 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
CTR-RPI-CC	Cooling Thermostat and Relay Mounted in Fan with Remote Panel Interlock - Set Point For Thermostat Should Be 85°F.
Show parts
	T678A1361 [1 used]	On/off stat two stage - Used with drain and fill evaporative cooler option. 20' capillary length, 55-175 degree range, 3.6 to 12 degree adjustable differential. Also used as cooling interlock thermostat.
	34.110.0184.0 [2 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [2 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
ECRPI	Evap Cooler Cooling Interlock Between Remote Panel and Heater
EC-FPDK-Evap	Freeze Protection Drain Control kit for Evaporative Coolers. Includes 3-Way water solenoid valve 8316G064 (shipped loose), Pressure switch installed upstream of 2way solenoid in unit, Brass Tee, 2 NPT half inch nipples, and two stage thermostat T678A1361. Field wiring required by others for 3-way valve. For both Celdek and Standard V-bank type Configurations.
Show parts
	EC261 [1 used]	Black Rubber Weather proof cover for Pressure switch for Evap Coolers with Freeze protection option.
	T6031A1136 [-1 used]	Intake Air Thermostat For Commercial Heaters - Honeywell Temp Control Used, temp range of -30 to 90 deg f and 5' capillary tube.
	T678A1361 [1 used]	On/off stat two stage - Used with drain and fill evaporative cooler option. 20' capillary length, 55-175 degree range, 3.6 to 12 degree adjustable differential. Also used as cooling interlock thermostat.
	175097-00 [1 used]	Pressure switch for Evap Coolers with Freeze protection option. 1/4" male NPT, pressure range 1.1-3 PSI. Wired normally closed. Installed upstream of the 2way solenoid valve in Unit. Replaces part number EC260 (174776-00).
	8316G064 [1 used]	Three-Way Water Solenoid Valve. 1/2" Pipe Thread. 120V, 60Hz. Normal Closed Pressure Connection. Normally Open Exhaust Connection.
IBT-EC-FPDK-Evap	Freeze Protection Drain Control kit for Evaporative Coolers. Includes 3-Way water solenoid valve 8316G064 (shipped loose), Pressure switch installed upstream of 2way solenoid in unit, Brass Tee and 2 NPT half inch nipples. Field wiring required by others for 3-way valve. For both Celdek and Standard V-bank type Configurations.
Show parts
	175097-00 [1 used]	Pressure switch for Evap Coolers with Freeze protection option. 1/4" male NPT, pressure range 1.1-3 PSI. Wired normally closed. Installed upstream of the 2way solenoid valve in Unit. Replaces part number EC260 (174776-00).
	8316G064 [1 used]	Three-Way Water Solenoid Valve. 1/2" Pipe Thread. 120V, 60Hz. Normal Closed Pressure Connection. Normally Open Exhaust Connection.
CD-G-24x20x12	Glasdek Media for size 1 celdek evaporative cooler intake. 24in wide x 20in tall x 12in thick.
PRESSGA15	Gas Pressure Gauge, 0-15PSI, 2.5" Diameter, 1/4" Thread Size
PRESSGA35	Gas Pressure Gauge, 0-35", 2.5" Diameter, 1/4" Thread Size
PRESSGA5	Gas Pressure Gauge, 0-5#, 2.5" Diameter, 1/4" Thread Size
PRESSGA-5-0+15	Gas Pressure Gauge, -5 to +15 Inches Wc., 2.5" Diameter, 1/4" Thread Size
1/2-496-5/16-6-14"	Gas regulator - 1/2" diameter thread size, 40 PSI Inlet Gas Pressure. 600 CFH, 6" - 14" Outlet Pressure. Includes 071-03409-002 "Green" spring and 5/16" 40 PSI orifice (018-01029-035).
XB-2	Extra Set of V-Belts. Only to be ordered as fan option at time fan is ordered.
MIAMI-DADE CERT	Miami Dade Impact and Wind Load Certification - Miami Dade County Product Control Approved. Florida Building Code approval. Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized. Exhaust Rails limited to 10" high.
MWP-HMUA	Melink Wiring Package for Heated Make-Up Air Units. 3 Phase Inverter duty Motor must be selected.
Show parts
	Gasket-black [2 used]	GASKETING - Weather Stripping w/PSA , Color BLACK, 1/8" X 1" (Price per foot)
	8012A [3 used]	J-BOX - SWITCH BOX - CY X 1/2.
	MRDPLATE [1 used]	Rotary Disconnect Plate for Supply Fans. 16 GA G90 Galvanized.
IBT EVAP INTERLOCK	Layer Control for IBT Evap
Show parts
	A/CP-DO-240-QC [1 used]	10K, Type II thermistor with 6" probe. 20' wire leads. (Replaces part# A/CP-DO-120-QC)
IHC-D76	Indoor Hanging Cradle For The Compact Direct Fired unitt. 2 HSA125 Hanging Isolators per Uni-Strut Included. Isolator quantity subject to change based on unit configuration.
Show parts
	UNIVERSAL STRUT [12 used]	1-5/8"W x 2-7/16"D 12ga Uni-strut with yellow dichromate finish for mua hanging cradle. Per foot price.
	HSA125 [4 used]	Isolation spring with 125lbs resistance, 1.33" rated deflection, for hanging installation. Color, Brown
AC-Interlock	Cooling Interlock Relay. 24VAC Coil. 120V Contacts. Locks out burner circuit when AC is energized.
Show parts
	34.110.0185.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (24VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-24VAC-T+LED) with LED indicator light.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
Burner-Interlock-IBT/RTU	Burner Interlock Input. Locks out cooling when interlock is energized.
Burner-Interlock	Burner Interlock Relay. 120VAC Coil. 120V Contacts. Locks out burner circuit when Interlock is not energized.
Show parts
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
CLCOMM_REV04	CASLink building monitoring system communications module. Requires internet & field wired ethernet connection or 3G cellular service. Includes Rev 3 Comm Module, RJ45 to modbus converter, 3 FT cat5 cable, and 1 FT of shielded twisted pair.
Show parts
	COMM01_rev4 [1 used]	CASLink Building Monitoring system communications module. Includes monitoring provisions for CORE interlock fire network and hood control network. Requires internet connection. Should be used for an ethernet length of 100ft. or greater.
	CAT5_Regular_3 [1 used]	CAT-5E CABLE - 3 Foot.
	MDP18-24A-1C [1 used]	DIN rail power supply 100-240VAC input 24 VDC, 18 Watts Replaces: DR-15-24
	88760 [1 used]	Multi-Conductor - Single Shielded Twisted Pair Cable, 18 AWG stranded (19x30) TC conductors, plenum, FEP insulation, overall shield (100% coverage), 20 AWG stranded TC drain wire, FEP jacket. Priced per foot. For use with CORE Interlock Network, light dimming 0-10VDC reference signal, and PWM signal from ECPM03 to ECM.
AC-Interlock-IBT/RTU	Cooling Interlock Input to PCB Board. Locks out burner circuit when AC is energized.
DDC-IP BACnet Monitoring	Remote IP BACnet monitoring for supply fans.
Show parts
	CAS_BACNET_GATEWAY_FAN [1 used]	BMS Gateway for BACNET MS/TP or BACNET IP. Includes CAS_GATEWAY circuit board and Protocessor BACnet interface. For use with PEM mounting standoffs. Not rated for use outside of an enclosure. When ordered as a part, specify MS/TP or IP in programmable part notes. PART REQUIRES PROGRAMMING!
	CAT5_Regular_1 [1 used]	CAT-5E CABLE - 1.0 Foot.
	RJ45_MODBUS_CONVERTER [1 used]	RJ45 TO SHIELDED TWISTED MODBUS CONVERTER DIN RAIL MOUNTED PCB
	CELLULAR VERIZON DATA- 1 YR [1 used]	VERIZON DATA FOR 1 YEAR. FOR ONLINE STORE ORDERING ONLY.
DDC-LONWorks Monitoring	Remote LONWorks monitoring for supply fans.
Show parts
	FPC-N35-103-401-0862_FAN [1 used]	Protonode Modbus to LONWORKS converter. Only to be used with fans. MUST BE PROGRAMMED (FS-QS-1211-0085 is a direct substitute)
	RJ45_MODBUS_CONVERTER [1 used]	RJ45 TO SHIELDED TWISTED MODBUS CONVERTER DIN RAIL MOUNTED PCB
DDC-MSTP BACnet Monitoring	Remote MSTP BACnet monitoring
Show parts
	CAS_BACNET_GATEWAY_FAN [1 used]	BMS Gateway for BACNET MS/TP or BACNET IP. Includes CAS_GATEWAY circuit board and Protocessor BACnet interface. For use with PEM mounting standoffs. Not rated for use outside of an enclosure. When ordered as a part, specify MS/TP or IP in programmable part notes. PART REQUIRES PROGRAMMING!
	CAT5_Regular_1 [1 used]	CAT-5E CABLE - 1.0 Foot.
FECONTAAFS	Field Wired Exhaust Contactor After Airflow Switch. Rated 23 Amps. Starts up to (2) Single Phase Motors. 2HP max. 115V, 3HP max. 240V. Starts one Three Phase Motor. 5HP max. 208V, 7.5HP 230v, 15HP max. 460V, 15HP max. 575V or (4) Dry Interlocks. Overload not Included
Show parts
	100-C23D10 [1 used]	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. Used only with Rockwell 193-T1A System Overloads.
FECONTBAFS	Field Wired Exhaust Contactor Before Airflow Switch. Rated 23 Amps. Starts up to (2) Single Phase Motors. 2HP max. 115V, 3HP max. 240V. Starts one Three Phase Motor. 5HP max. 208V, 7.5HP max 230v, 15HP max. 460V. Overload not Included
Show parts
	100-C23D10 [1 used]	Contactor - 120V, 50/60Hz Coil, Rated for 23 AMPs. Used only with Rockwell 193-T1A System Overloads.
EXHSTARTER1-3AAFS	Exhaust Fan Starter Installed in size 1, 2, or 3 heater powered after airflow swtich
EXHSTARTER1-3BAFS	Exhaust Fan Starter Installed in size 1, 2, or 3 heater powered before airflow switch
Exhaust on Fire	Exhaust on Fire
FEInterBAFS	Relay for Field wired Exhaust Interlock. Located before airflow switch.
Show parts
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
MAN RES FSC	Manual reset of flame safety controller. Used to meet Canada requirement. Flame safety will not reset on cycle of power. Dips 1,2,3,5 closed, 4, 6 open standard settings.
OCCUPIED SCHEDULING	Occupied Scheduling Defaulted for IBT/RTU.
OPPSIDE-H-CTRLS	Mount motor and controls on opposite side of heater.
6 Pole Rotary Disconnect	6 Pole 40 Amp Rotary Disconnect for Fans. Includes Switch, switch handle, mounting plate, gasket, and junction box.
Show parts
	Gasket-black [2 used]	GASKETING - Weather Stripping w/PSA , Color BLACK, 1/8" X 1" (Price per foot)
	8012A [3 used]	J-BOX - SWITCH BOX - CY X 1/2.
	MRDPLATE [1 used]	Rotary Disconnect Plate for Supply Fans. 16 GA G90 Galvanized.
CLOGFILTHMI	Clogged Filter Switch with Notification on HMI
Show parts
	RFS-4100-078 [1 used]	AIR FLOW SWITCH - Used for IBT air proving switch and clogged filter switch option. Factory set @ .25", adjustable.
CLOGFILT	Clogged Filter Switch with Light on Remote Panel
Show parts
	RFS-4100-078 [1 used]	AIR FLOW SWITCH - Used for IBT air proving switch and clogged filter switch option. Factory set @ .25", adjustable.
CVOUTLET	GFCI 15 amp Convenience Outlet For Heater Enclosure. Power supply by others - Includes receptacle and J box.
EXTENDED-DROP	Extended Drop for Commercial Heaters and Supply Fans. Extends the power and remote panel connections to the unit to 20' of total length.
RPLTSWITCH	Light switch installed in heater remote panel.
HPL-D76	High Profile Lid Option for D76. Required with belt drive, single phase motors.
Show parts
	D76CAP [-1 used]	CAP FOR D76 HEATER. Use D76CAPM for units with single phase motors.
	D76CAPM [1 used]	EXTENDEDCAP FOR D76 HEATER. Used with single phase motors.
Shaft Grounding Ring Option	Shaft Grounding Ring Option
D76-D-MBDD	Motorized Back Draft Damper 13" X 17" for D76 Compact Direct Fired Heaters w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, TF120S Actuator Included
Show parts
	TFB120-S [1 used]	ACTUATOR- TF Series, (DCA) Spring Return, 22 in-lb torqe. Fits 3/8" - 1/2" shaft, Control direction CW & CCW, Spring direction reversible; 1/2" conduit fittings.
	D76 Damper [1 used]	Motorized Back Draft Damper 13" X 17" w/Extended Shaft, Standard Galvanized Construction, 3/4" Rear Flange, TF120S Actuator Not Included, for D76 Direct Fired Housing. Old Vendror # SER100AA9RD.
Full Crating for Heater	Full crating for commercial heaters for shipping.
ENAM-1	Tan Enamel Coating (exterior walls/roof) For Heaters with 7"-15" blower wheels, includes casing and intakes. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229)
D-Hanger	Curb Duct Hanger - 1-1/4" Angle Iron Frame Welded to Curb to support standard size ductwork. Priced per curb. Only available when curb assembly is ordered.
FIRESTAT-DISCHARGE-	Discharge Firestat. Set to 240°F
FREEZESTAT-	Freezestat factory set at 35°F and 10 minutes.
FRSTAT-LTL	Freezestat With 10' Sensor and Low Temp Light on Remote Panel. Factory set at 35°F and 10 minutes.
Show parts
	A/CP-DO-240-QC [1 used]	10K, Type II thermistor with 6" probe. 20' wire leads. (Replaces part# A/CP-DO-120-QC)
	00202-0289 [1 used]	Freezestat Control, (30°F to 75°F temperature range and 1min to 10min time range). Factory set at 35°F and 10 minutes. Also Known As Low Temp Sensor. Sensors sold separately, A/CP-DO-240-QC (20') and A/CP-DO-120-QC (10').
FRSTAT-365 Day	Freezestat With 10' Sensor and Low Temp Indicator on 365 Day Stat. Factory set at 35°F and 10 minutes.
Show parts
	A/CP-DO-240-QC [1 used]	10K, Type II thermistor with 6" probe. 20' wire leads. (Replaces part# A/CP-DO-120-QC)
	00202-0289 [1 used]	Freezestat Control, (30°F to 75°F temperature range and 1min to 10min time range). Factory set at 35°F and 10 minutes. Also Known As Low Temp Sensor. Sensors sold separately, A/CP-DO-240-QC (20') and A/CP-DO-120-QC (10').
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
FIRESTAT-INTAKE-	Intake Firestat. Set to 135°F
PRE-PT	Pre purge (set at 30 seconds) allowing the blower to purge the inside of the heater.
DCVWP-SUPPLY	Separate 120VAC Wiring Package for Make-Up Air Units. Option must be selected when mounting VFD in prewire panel or with DCV package. Provides separate 120VAC input to supply fan. This 120V signal must be run by electrician from DCV to mua switch.
Show parts
	34.110.0184.0 [1 used]	RELAY - Used with part number 34.110.0147.0. (120VAC, 10 Amps) DPDT. (Clion = HHC68A-2Z-120VAC-T+LED), with LED indicator light with AgCe contacts rated to 15A.
	34.110.0147.0 [1 used]	RELAY Socket PTF08A - 10 Amp Contacts, Plug in style. Used with part number 34.110.0146.0, 34.110.0188.0, or 34.110.0168.0. Coil Terminals = 7&8. (Contact 1: Com=5, NC=1, NO=3) (Contact 2: Com=6, NC=2, NO=4)
VAV-WP-VDC-INPUT-MUA	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. 0-10VDC Speed Control Variable Frequency Drive Included
VAV-WP-BSPC-MUA	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A/MLP2-D25-W-B-A-C-0P [1 used]	ACI- MLP2 Series Low Differential Pressure transmitters, pressure range of - .25" w.c. to + .25" w.c. low temperature version. Sensor has brass fittings. Accepts 0.25 O.D. x 0.17 I.D. Push On.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-MC-MUA	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS-MUA	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.