Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

WP-16TH Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

CK48HF21HF01-50-115 0.5 1 115 V 7.6 0.5" 48Y 17 lbs 1425 HSSA

ODP (Open Drip Proof)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
CKWC-110K	HSSA Motor Speed Control, Solid State, Model CKWC-110K (VR110B001), 10 AMPS - 120 V.A.C. @25°C. Factory set to reduce to 65VAC under motor load. (74 VAC with 100 Watt load). PARTS ORDERS: Include QTY. (4) #6-32 x 1/2" (A0014606) screws and QTY. (3) High Temp Wire Nut Medium (A0017569).
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.

CK48HF21HF01-50-230 0.5 1 230 V 3.8 0.5" 48Y 17 lbs 1425 HSSA

ODP (Open Drip Proof)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.
KBWC-25K-H6182	Motor Speed Control, Solid State, Model KBWC-25K (H6182), 5 AMPS - 230 V.A.C. @25°C. Factory set to reduce to 130 VAC under motor load. (150 VAC with 100 Watt load). Used On DU/DR 85 HFA.

CK48HF21HF01-60-115 0.5 1 115 V 8.4 0.5" 48Y 18 lbs 1670 HSSA

ODP (Open Drip Proof)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
CKWC-110K	HSSA Motor Speed Control, Solid State, Model CKWC-110K (VR110B001), 10 AMPS - 120 V.A.C. @25°C. Factory set to reduce to 65VAC under motor load. (74 VAC with 100 Watt load). PARTS ORDERS: Include QTY. (4) #6-32 x 1/2" (A0014606) screws and QTY. (3) High Temp Wire Nut Medium (A0017569).
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.

CK48HF21HF01-60-230 0.5 1 208-220-230 V 4.6-4.5-4.2 0.5" 48Y 17 lbs 1670 HSSA

ODP (Open Drip Proof)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
TY-224-107-CONNECTOR	Motor Connector - Quick Disconnect Wire Harness With Ground. Used To Connect Direct Drive DU/DR Motors With Six Pin Connectors To The Speed Control. Used For 115/1/60 & 230/1/60 Vac Motors & Speed Controls.
KBWC-25K-H6182	Motor Speed Control, Solid State, Model KBWC-25K (H6182), 5 AMPS - 230 V.A.C. @25°C. Factory set to reduce to 130 VAC under motor load. (150 VAC with 100 Watt load). Used On DU/DR 85 HFA.

BMN48-375I1-ES-M52-CA-50-115 0.5 1 115 V 6.3 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN48-375I1-ES-M52-CA-60-115 0.5 1 115 V 6.3 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN48-375I2-ES-M52-CA-50-230/277 0.5 1 220-230-277 V 3.7-3.5-2.9 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN48-375I2-ES-M52-CA-60-230/277 0.5 1 208-220-230-277 V 3.8-3.5-3.5-2.9 0.5" 48 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800048 [28 used]	Bolt Whiz 1/4-20 X 1/2, Steel
11626-03224 [28 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
SB6-4-RIVET [64 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
WP1416FGSCREENCOV [1 used]	Wall Prop 14/16 Front Gaurd Screen Cover.

Options

Part
ECM Wiring Package - MSC	ECM Wiring Package - Exhaust - Manual or 0-10VDC Reference Speed Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC	ECM Wiring Package - Exhaust - Manual or 0-10VDC Reference Speed Control -MSC- (TELCO), CCW Rotation. For Use with ECPM03
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
MSC w/ 10KLVC-DB	ECM Wiring Package - Exhaust - Manual Potentiometer Speed Control -MSC-
Show parts
	10KLVC-DB [1 used]	10K OHM POTENTIOMETER WITH INTEGRATED WALL PLATE.
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC - MODBUS	ECM Wiring Package - Exhaust - MODBUS Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package-ECPM03	ECM Wiring Package - PWM Signal from ECPMO3 Prewire (TELCO Motor), CCW Rotation
2E340	Line Voltage Thermostat, 120 or 240 volt, used as fan thermostat in cooling applications. Close on temperature rise. 80-130 degree dial. 2E340. 13.8 amps at 120V, 10 amps at 240V.
WP1416-BDD	Wall Prop 14/16 Gravity Back Draft Damper
MSC External Control - TWO SPEED	MSC external control by means of a switch, potentiometer or 0-10V signal. Enable TWO SPEED.
EPOWP-Enamel	Tan Enamel Coating For WP10-20 and WPD20-72. Weather Hood Painted Only. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
WP1416GS	Wall Prop 14/16 Gaurd Screen Option.
Show parts
	WP1416FGSCREENCOV [1 used]	Wall Prop 14/16 Front Gaurd Screen Cover.
WP1416WC-8	Wall Prop 14/16 Wall Collar (Set of 8).
Show parts
	90064A620 [24 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
WP1416WHA	Wall Prop 14/16 Weather Hood Assembly (Top, Bottom, and Side).
Show parts
	SB6-4-RIVET [24 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	WP1416FGSCREENCOV [1 used]	Wall Prop 14/16 Front Gaurd Screen Cover.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.