Fan Parts

Specifying Software

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

TH-SIF9DD-SS Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

BMN42-120I1-ES-IBA-CA-60-115 0.166 1 115 V 1.9 0.375" 42 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

810022	Green Ground Screw
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN42-120I1-ES-IBA-CA-50-115 0.166 1 115 V 1.9 0.375" 42 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

810022	Green Ground Screw
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN42-120I2-ES-IBA-CA-60-230/277 0.166 1 208-230-277 V 1.3-1.2-1 0.375" 42 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

810022	Green Ground Screw
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN42-120I2-ES-IBA-CA-50-230/277 0.166 1 208-230-277 V 1.3-1.2-1 0.375" 42 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

810022	Green Ground Screw
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN42-120I5-ES-IBA-CA-50-230 0.166 1 208-230-277 V 1.2-1.1-1 0.375" 42 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

810022	Green Ground Screw
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

BMN42-120I5-ES-IBA-CA-60-230 0.166 1 208-230-277 V 1.2-1.1-1 0.375" 42 10 lbs 1800 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

810022	Green Ground Screw
Bushing 7/8	Insulated Snap Bushing - For .875 Hole Diameter.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
ECM-Harness-T	Wiring Harness for Telco EC motors. Connects power to speed control and transformer. Used with Telco EC Motors.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800032 [4 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
800034 [4 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
0120763.0800 [20 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
SIF910ADR-SS [2 used]	Access Door (Stainless Steel) for Square Inline Fan with 9-10" wheel.
SIF910DDBASED-SS [1 used]	Base (Stainless Steel) for Square Inline Fan with 9-10" wheel.
92323A558 [4 used]	Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
11626-03224 [16 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
SIF910CP-SS [2 used]	Corner Post (Stainless Steel) for Square Inline Fan with 9-10" wheel.
SIF910CPOR-SS [1 used]	Corner Post Opposite Rear (Stainless Steel) for Square Inline Fan with 9-10" wheel.
SIF910CPR-SS [1 used]	Corner Post Rear (Stainless Steel) for Square Inline Fan with 9-10" wheel.
SIF910CRNRS [4 used]	Corner Support for wall/ ceiling mounting Square Inline Fan Sizes 9-10.
SIF910FIP-SS [1 used]	Front Inlet Panel (Stainless Steel) for Square Inline Fan with 9-10" wheel.
58371-1/2 [2 used]	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1 [1 used]	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
SIF910DDMTRCVR-SS [1 used]	Motor Cover (Stainless Steel) for direct drive Square Inline Fan with 9-10" wheel.
SIF910DDMTRCVRB-SS [1 used]	Motor Cover Back (Stainless Steel) for direct drive Square Inline Fan with 9-10" wheel.
SIF910DDMTRPLT-SS [1 used]	Motor Plate (Stainless Steel) for direct drive Square Inline Fan with 9-10" wheel.
SIF910DDMTRPLTSUP-SS [1 used]	Motor Plate Support (Stainless Steel) for direct drive Square Inline Fan with 9-10" wheel.
SIF910DDBASE-SS [1 used]	Top (Stainless Steel) for Square Inline Fan with 9-10" wheel.
F5020009-SIF9DD [1 used]	Venturi 13.500" OD X 1 3/16" Height, .064" 1100-0 Alum. Used on SIF9DD

Options

Part
ECM Wiring Package - MSC	ECM Wiring Package - Exhaust - Manual or 0-10VDC Reference Speed Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC	ECM Wiring Package - Exhaust - Manual or 0-10VDC Reference Speed Control -MSC- (TELCO), CCW Rotation. For Use with ECPM03
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
MSC w/ 10KLVC-DB	ECM Wiring Package - Exhaust - Manual Potentiometer Speed Control -MSC
Show parts
	10KLVC-DB [1 used]	10K OHM POTENTIOMETER WITH INTEGRATED WALL PLATE.
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC - MODBUS	ECM Wiring Package - Exhaust - MODBUS Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package-ECPM03	ECM Wiring Package - PWM Signal from ECPMO3 Prewire (TELCO Motor), CCW Rotation
I 12 BDD w/ 120/240V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq. Actuator is 120/240V
Show parts
	MTR-611 [1 used]	120/240 v Motor Pack for I Series Backdraft Dampers
	I 12 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq.
I 12 BDD w/ 24V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq. Actuator is 24V
Show parts
	MTR-611 24V [1 used]	24 V Motor Pack for I Series Backdraft Dampers
	I 12 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq.
HSA75-4	Hanging Vibration Isolators for Square Inline Fans. Contains four HSA75 Hanging Isolators.
Show parts
	HSA75 [4 used]	Isolation spring with 75lbs resistance, 1.50" rated deflection, for hanging installation. Color, Orange.
I 12 BDD	Gravity Back Draft Damper - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq.
Pool Room Exhaust	Current Sensor Mounted In Exhaust Fan For Use With Pool Room Temp Control
Show parts
	A/MCS-A [1 used]	Current Sensor - Solid Core, AC Current Range: 0.32 - 150A , NO Contact w/ Max Rating of 1A @ 36VAC/VDC
Full Crating for Exhaust Fan	Full crating for exhaust fans for shipping.
SIF910SD-Left-Square	Side Discharge door for SIF 9-10. Left side from inlet. Square Duct Connection.
SIF910SD-Right-Square	Side Discharge door for SIF 9-10. Right side from inlet. Square Duct Connection.
SIF910SD-Straight-Square	SIF9-10 with straight discharge. Square Duct Connection.
SIF910SD-Left-DW10FRISER-SS	Side Discharge door (Stainless Steel) for SIF 9-10. Left side from inlet. Standard 10" Duct Connection.
Show parts
	800034 [8 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	SIF910DA-SS [1 used]	Discharge Adapter (Stainless Steel) used to go from SIF9-10 to round duct.
SIF910SD-Right-DW10FRISER-SS	Side Discharge door (Stainless Steel) for SIF 9-10. Right side from inlet. Standard 10" Duct Connection.
Show parts
	800034 [8 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	SIF910DA-SS [1 used]	Discharge Adapter (Stainless Steel) used to go from SIF9-10 to round duct.
SIF910SD-Straight-DW10FRISER-SS	SIF9-10 with straight discharge (Stainless Steel). Standard 10" Duct Connection.
Show parts
	800034 [8 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	SIF910DA-SS [1 used]	Discharge Adapter (Stainless Steel) used to go from SIF9-10 to round duct.
SIF910DSO-SS	Discharge Screen Option (Stainless Steel) used on the SIF9-10.
Show parts
	SIF910DS-SS [1 used]	Discharge Screen (Stainless Steel) used on the SIF9-10.
SIF910DSO-SS	Discharge Screen Option (Stainless Steel) used on the SIF9-10.
Show parts
	SIF910DS-SS [1 used]	Discharge Screen (Stainless Steel) used on the SIF9-10.
SIF910SD-Inlet-Square	SIF9-10 - Square Duct Inlet Connection.
SIF910SD-Inlet-DW10FRISER-SS	SIF910 Standard 10" Duct Inlet Connection (Stainless Steel).
Show parts
	DW10RERI2PCS-SIF10 [2 used]	2 Piece Duct Riser Retaining Ring, 10" Duct, Used on SIF 9 / 10 inlet connections. 12 GA Steel, Clear Zinc Coating. 1 Piece Per Part Number, 2 Pieces Required Per Assembly.
	800034 [8 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
SIF-Mount-Top(9-10)	SIF - Horizontal Overhead Pre-Installed Mounts (Used on sizes 9-10). Includes shipping brackets.
Show parts
	SIF910CRNRS [8 used]	Corner Support for wall/ ceiling mounting Square Inline Fan Sizes 9-10.
SIF-Mount-Loose(9-10)	SIF - Mounting Brackets Shipped Loose (Used on Sizes 9-10).
Show parts
	SIF910CRNRS [4 used]	Corner Support for wall/ ceiling mounting Square Inline Fan Sizes 9-10.
5C126-4	Floor Mount Spring Vibration Isolators. Option for the BI10, USBI11, USBI13 & USBI15 (4 required) Utility Set units and SIF11-18 (4 required). Max Weight = 75 lbs. 1.3" Deflection. 3/8" bolt diameter. Set of 4. "Orange" (5C126x4) Grainger equivalent = 5C126 - Mason C-A-75.
Show parts
	5C126 [4 used]	Floor Mount Spring Vibration Isolators. Option for the BI10 and BI11 (4 required) thru BI18 (6 required) Utility Set and MUA units. Max Weight = 75 lbs. 1.3" Deflection. 3/8" bolt diameter. (Sold separately for indoor/outside use). "Orange" (5C126) - Mason C-A-75.
8860041-4	Rubber Vibration Floor Isolators for In-Line Exhaust Fans (set of 4). Option for the SQB10 thru SQB15. (5079)
Show parts
	T44-5A [4 used]	Vibration Isolators for Utility Set Exhaust Fans and PCU blowers. Option for the BI-RM Utility Set. (Sold separately.) (5079) (T44-5A)

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.