Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

DU300HTH Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP0036 3 3 208-230/380/460 V 10.2-9.2/5.4/4.6 1.375" 213T 120 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP0056 5 3 208-230/380/415/460 V 15.8-14.3/8.4/8/7.2 1.375" 215T 123 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP7/56 7.5 3 208-230/460 V 22.3-20.2/10.1 1.625" 254T 170 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP7/56-50 7.5 3 190/220/380 V 22.3/19.3/11.2 1.625" 254T 170 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP7/54 7.5 3 200-208-230/380/400/460 V 21.5-21.1-19.1/11.4/10.8/9.6 1.375" 213T 104 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP7/54-50 7.5 3 190/208-230/380/415 V 22.9/21.1-19.1/11.5/10.7 1.375" 213T 158 lbs 1470 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP0104 10 3 190/208-230/380/460 V 29.9/27-24.4/15/12.2 1.375" 215T 143 lbs 1755 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP0104-50 10 3 190/380/415 V 30/15/13.7 1.375" 215T 143 lbs 1436 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

DTP0106 10 3 208-230/460 V 28.4-25.7/12.9 1.625" 256T 234 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

01012OT3H256T-S 10 3 575 V 11.1 1.625" 256T 214 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00312ET3H213T-W22 3 3 575 V 3.5 1.375" 213T 163 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00312ET3E213T-W22 3 3 208-230/460 V 9.7-8.8/4.4 1.375" 213T 99 lbs 1175 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP0036 3 3 208-230/460 V 10.2-9.2/4.6 1.375" 213T 126 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00509ET3E254T-W22-50 4 3 190/380 V 15.5/7.8 1.625" 254T 284 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00709ET3E256T-W22-50 5 3 190/380 V 19.3/9.7 1.625" 256T 313 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00509ET3E254T-W22 5 3 208-230/460 V 16.8-15.2/7.6 1.625" 254T 284 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00512ET3H215T-W22 5 3 575 V 5.5 1.375" 215T 180 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00512ET3E215T-W22 5 3 208-230/460 V 15.2-13.7/6.9 1.375" 215T 172 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP0056 5 3 208-230/460 V 15.6-14/7 1.375" 215T 164 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP7/56 7.5 3 208-230/460 V 21.1-19.1/9.6 1.625" 254T 267 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00709ET3E256T-W22 7.5 3 208-230/460 V 24.5-22.2/11.1 1.625" 256T 313 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP7/54-50 7.5 3 190/380 V 22.3/11.1 1.375" 213T 117 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP7/54 7.5 3 190/200-208-230/380/400/460 V 22.4/21.4-20.5-18.5/11.2/10.7/9.3 1.375" 213T 148 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
650DC-2	3/8" Romex Connector
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

00712ET3H254T-W22 7.5 3 575 V 7.6 1.625" 254T 316 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP7/56-50 7.5 3 190/380 V 22.4/11.2 1.625" 254T 267 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP0104 10 3 190/200-208-230/380/400/460 V 29.6/27.8-26.6-24/14.8/13.9/12 1.375" 215T 159 lbs 1755 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

GP0104-50 10 3 190/380 V 29.7/14.9 1.375" 215T 159 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

NP0106 10 3 208-230/460 V 28.3-25.6/12.8 1.625" 256T 311 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8	1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.
SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
800041	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800030	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800043 [8 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800026 [10 used]	A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc
800032 [14 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
800034 [35 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
0120763.0800 [10 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
F2370030 [1 used]	Angle Ring 1/8" X 1" X 1" Aluminum Angle, 52 13/16" Dia. Out. For BDU30 / BDU30HP / BDCR30 (620079A)
F5020030 [1 used]	Baffle 19 3/16" Dia. Ins. Venturi X 9" Height, .080 x 48" 1100-0 Alum. (Spun) (-0 Drill 1.500 Hole) (-1 No Hole) (620189)
F8040030 [1 used]	Base Assembly For BDU30 / BDU30HP / BDCR30 (-0 Drill .875 Hole)(-1 No Hole) (620075)
92323A575 [4 used]	Bolt Whiz - Grade 5 Steel Serrated Flange Head Cap Screw, 1/2"-13 Thread, 1-1/2" Long, Fully Threaded.
F5170030 [1 used]	Bottom Skirt 38" Dia. Out. Bottom X 51 31/32" Dia. Out. Top X 11 3/8" Height, .080 x 60" 1100-0 Alum. For 30" Belt Drive Upblast & Downblast Fan (620166)
F2140030 [1 used]	Cooling Tube 3 1/2" Out. Dia. X 9" Long, .080 Wall Thk. Extruded Alum. For BDU30 / BDU30HP (620197)
F2100001 [2 used]	Cooling Tube Grommet 3 1/2" Ins. Dia., 4 1/2" Out. Dia., 3/8" Thk., Black Silicone Rubber(620047)
800103 [3 used]	Cotter Pin Hammerlock Zinc 1/16 X 1/8 X 4 1/2, Steel
8098 [2 used]	Heyco Bushing SB-875-11, .685 Dia. Ins. X .850 Dia. Out. X .450 Height, Matl. Plastic Black
ETL-Label [1 used]	Label - ETL Information Label. Label located in job docs should be printed and shipped.
A-17 [4 used]	Ludwig A-17 Clip (Hood Retaining) 1" Width X 2 1/2" Height, Spring Steel - Exh.fans, Includes Mounting Hardware When Shipped As A Replacement Part. Old AX# A0005723.
MANUAL EXHAUST [1 used]	Manual for PRVs
F5150030-S [1 used]	Motor Cover 37 15/16" Dia. Ins. X .875" Height, .24GA Galv. (Spun) BDU/HP/BDCR 30 Pan Hood
F2090036DD [1 used]	Motor Plate 12 13/16" X 6 1/16" X 28 1/2", 12 Ga. Galv. Steel For DU/DR 300 and DU/DR 360. Mounts 3 phase 7.5 HP motors with 213T frames.
F2080036DDR [1 used]	Motor Plate Right Support 22 1/2" X 10 5/8" X 1 5/8", 12 Ga. Galv. Steel For DU/DR 300 and DU/DR 360.
F2090036DDSUP [1 used]	Motor Plate Support 12 3/4" X 17" X 11 7/8", 12 Ga. Galv. Steel For DU/DR 300 and DU/DR 360.
800113-D60 [5 used]	Motor/Blower Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 60
800031 [20 used]	Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
99904A104 [4 used]	Nut Whiz - Zinc-Plated Steel Serrated-Flange Hex Locknut 1/2"-13 Thread Size, 3/4" W, 29/64" O'all Height. Grade 5.
SB6-4-RIVET [21 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
800023B [30 used]	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
800114 [1 used]	Shaft Key USBI 5/16" X 5/16" X 2" Long, Steel
F2050030-S [1 used]	Shaft Wrapper 37 3/4" Dia. Out. X 20" Height. For BDU30 / BDU30HP / BDCR30
SKID-5858 [1 used]	Skid - 58" X 58" - Used For BDU/BDCR 30.
SSPI-08-06-RIVET [38 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
F5040030 [1 used]	Top Plate / Motor Mount 37 11/16" Dia. Out. X 1" Height, 14 Ga. Galv. Steel x 39.25" (Spun) (-0 Drill .875 Hole) (-1 No Hole) (620095)
F2160030-S [1 used]	Top Windband 51 3/8" Dia. Out. X 15 3/16" Height, 20GA Galv For 30" Centrifugal Upblast (Std & High Pressure) Exhaust Fan.
F8030030-P [10 used]	Vertical Brace Assy With PEM Nut. 1/8" X 18 1/2", 12 Ga. Galv. Steel For GV30 (was A0004731).
800014 [20 used]	Washer Nylon 1/4 Dia. Ins. X 9/16 Dia. Out. X 1/16 Thk., Nylon (Color White)
F8010030P1-B [1 used]	Wheel Assembly 30 7/8" Dai. Top X 21 1/16" Dia. Ins. Bottom X 11 7/8" High. Uses 10" Ø B Hub with P1 Bushings. *Requires P1 type split taper bushing if ordered as a replacement part.
5/16-18 WHIZNUT [8 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.

Curbs

Part
CRB38.5X8E	ROOF CURB - 38.50" Square X 8" High.
CRB38.5X12E	ROOF CURB - 38.50" Square X 12" High.
CRB38.5X12-BTC	BOLT TOGETHER ROOF CURB -38.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB38.5X20E	ROOF CURB - 38.5" Square X 20" High.
CRB38.5X20L-BTC	BOLT TOGETHER ROOF CURB -38.5" Square X 20" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB38.5X22E	ROOF CURB - 38.5" Square X 22" High
CRB38.5X24E	ROOF CURB - 38.5" Square X 24" High
CRB38.5X26E	ROOF CURB - 38.5" Square X 26" High
CRB38.5X26.5E	ROOF CURB - 38.5" Square X 26.5" High
CRB38.5X44E	ROOF CURB - 38.5" Square X 44" High For Exhaust Fans

Options

Part
52012	Turn-tite Low-Pressure Mechanical Test Plug Steel W/Neoprene Seal, for Pipe ID 3.75". Used for Upblast Fan Wheel Access. - Cut Hole with McMaster Carr Hole Saw 4066A54 With Pilot Bit 4066A79.
GC-CUF	Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 Gauge) (Includes Down Spout)
Show parts
	F2100015 [1 used]	Grease Pipe Down Spout 1 1/2" Ins. Dia., Material Vinyl Color Grey, 60 Durometer For BDU11 Thru BDU36, BDU15HP Thru BDU36HP, DU8 Thru DU85 - 99800PEP.
I 35 BDD w/ 120/240V Motor	MOTORIZED BACKDRAFT DAMPER - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq. Actuator is 120/240V For the BDU30, BDCR30.
Show parts
	MTR-611 [1 used]	120/240 v Motor Pack for I Series Backdraft Dampers
	I 35 BDD [1 used]	Gravity Backdraft Damper - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq.
I 35 BDD w/ 24V Motor	MOTORIZED BACKDRAFT DAMPER - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq. Actuator is 24V For the BDU30, BDCR30.
Show parts
	MTR-611 24V [1 used]	24 V Motor Pack for I Series Backdraft Dampers
	I 35 BDD [1 used]	Gravity Backdraft Damper - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq.
I 35 BDD w/ 460V Motor	MOTORIZED BACKDRAFT DAMPER - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq. Actuator is 460V For the BDU30, BDCR30.
Show parts
	MTR-611-460 [1 used]	460 v Motor Pack for I Series Backdraft Dampers
	I 35 BDD [1 used]	Gravity Backdraft Damper - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq.
WBE-30-24	Windband Extension Assembly for Centrifigual Upblast Fan with 30.8125" Wheel. 52.813" OD, 24.00" Height. Constructed of Galvanized Steel Ater 1/1/2016. Includes 4 Quick release latches & 10 Self Drilling Screws.
Show parts
	800032 [4 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	F2370030 [2 used]	Angle Ring 1/8" X 1" X 1" Aluminum Angle, 52 13/16" Dia. Out. For BDU30 / BDU30HP / BDCR30 (620079A)
	92323A558 [4 used]	Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	SB6-4-RIVET [26 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	800023B [10 used]	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
	97-60-320-11 [4 used]	Southco large draw latch for windband extensions
WBE-30-45-DEGREE	Windband Extension Assembly for Centrifigual Upblast Fan with 30.8125" Wheel. 52.813" OD, 52" Height. Constructed of Galvanized Steel After 1/1/2016. Includes 4 Quick Release latches & 10 Self Drilling Screws. Designed For 45 Degree Discharge. 3 Week Lead Time.
Show parts
	800032 [4 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	F2370030 [2 used]	Angle Ring 1/8" X 1" X 1" Aluminum Angle, 52 13/16" Dia. Out. For BDU30 / BDU30HP / BDCR30 (620079A)
	92323A558 [4 used]	Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	SB6-4-RIVET [23 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	800023B [10 used]	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
	97-60-320-11 [4 used]	Southco large draw latch for windband extensions
	F2161030WBE-45-S [1 used]	Windband Extension 45 Degrees - .16GA Galv. For 30" Centrifugal Upblast (Belt & Direct Drive) Exhaust Fan. Non-Standard Part 3 Week Lead-Time. Must Ship To The Plant For Assembly. Sheet Metal Piece ONLY.
FAN HEAT BAFFLE	Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
Show parts
	INSULATION/sq ft [3 used]	INSULATION (Price per Sq Foot)
EYEBOLTS-5	Eye Bolt 5 - Eye Bolts Are Installed On The Outside Of The Apron / Hood. Used For Guy Line Tie Off On Fans With 5 Tie Off Points.
Show parts
	9489T170 [5 used]	Eye Bolt - Light Duty With Nut, Zinc Plated, 1/4-20 x 7/8" Threads - 1" Shank.
	800031 [5 used]	Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
	800011 [10 used]	Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel - 360 PER lbs.
HD-HBKIT-LOCKING	HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
	800034 [44 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [44 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	910XH [1 used]	HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. 10 GA Galvanized.
HD-HBKIT-01	HINGE KIT - Heavy Duty Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 24-30 inches. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
	800034 [45 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [45 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	910H [1 used]	HINGE KIT - Heavy Duty Hinge kit for exhaust fan roof curbs. 10 GA Galvanized.
HD-HBKIT-LOCKING-EXT	HINGE KIT - Extended Heavy Duty Hinge kit with locking spring pin on either side for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
	800034 [54 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
	0120763.0800 [54 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
MIAMI-DADE NOA-1 Aluminum Upblast	Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Hinge Kit Label	Label - Remove The Hinge Kit Label From The Fan Base.
SCR-30	Bird Screen - 1/2" x 1/2" Wire Screen for Belt Drive Upblast & Downblast Fans
Ship Loose Disconnect For Remote Mount	Disconnect Switch Loose - Wire Is Extended 10' To Allow Remote Mounting Of The NEMA 3R Enclosure & Switch. Cord Fittings Are Installed In Switch Box. 10-32 Hardware and 7/8" Plug Are Installed In Apron Switch Mounting Holes.
Show parts
	9750K25-APRON-PLUG [1 used]	Apron Plug - Push-in Flexible Round Plastic Plug, Fits 7/8" ID, 1-5/32" Head Diameter
	800041 [2 used]	Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800030 [2 used]	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
TCW30	Teflon Coated Wheel - Lead-Time 3 Weeks.
Show parts
	F8010030P1-B [-1 used]	Wheel Assembly 30 7/8" Dai. Top X 21 1/16" Dia. Ins. Bottom X 11 7/8" High. Uses 10" Ø B Hub with P1 Bushings. *Requires P1 type split taper bushing if ordered as a replacement part.
I 35 BDD	Gravity Backdraft Damper - with flange, damper is 35" sq., 2" deep, O.D. of flange is 37" sq.
Dry Mode Exhaust	Current Sensor Mounted In Exhaust Fan For Use With Pool Room Temp Control
Show parts
	A/MCS-A [1 used]	Current Sensor - Solid Core, AC Current Range: 0.32 - 150A , NO Contact w/ Max Rating of 1A @ 36VAC/VDC
Shaft Grounding Ring Option	Shaft Grounding Ring Option
EPO30-Enamel	Tan Enamel Coating For 30" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.
F21024-36VFDMT	VFD Mounting bracket for DU/DR 300 and 360.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.