Sign In         Specifying Software      
 
    Home        About Us        Contact Us        Help Buy Online or Call 1-800-476-5888  
 
 
DU30HTH Parts
Motors, Pulleys, & Motor Specific Parts
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
CK48HF24KF01-60-115 0.25 1 115 V 3.8 0.5" 48Y 13 lbs 1625 HSSA
ODP (Open Drip Proof)  
Show parts
CK48HF24KF01-60-230 0.25 1 208-230 V 2.1-1.9 0.5" 48Y 12 lbs 1700 HSSA
ODP (Open Drip Proof)  
Show parts
CK48HF24KF01-50-115 0.25 1 115 V 4 0.5" 48Y 12 lbs 1440 HSSA
ODP (Open Drip Proof)  
Show parts
CK48HF24KF01-50-230 0.25 1 230 V 2 0.5" 48Y 12 lbs 1440 HSSA
ODP (Open Drip Proof)  
Show parts
CK48HF24KF02-50-115 0.25 1 115 V 4 0.5" 48Y 12 lbs 1400 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts
CK48HF24KF02-50-230 0.25 1 230 V 2 0.5" 48Y 12 lbs 1400 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts
CK48HF24KF02-60-115 0.25 1 115 V 3 0.5" 48Y 12 lbs 1625 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts
CK48HF24KF02-60-230 0.25 1 230 V 1.5 0.5" 48Y 12 lbs 1625 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Replacement Parts
Part
800026
[4 used]
A0005680 - Serrated Phillips Truss Screw, 1/4-20 X 5/8, Zinc
800034
[15 used]
A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
0120763.0800
[3 used]
A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
F5060011
[1 used]
Apron 17 5/8" Dia. Out. Bottom X 25 9/16" Dia. Ins. Top X 14" Height, .080 x 38" 1100-0 Alum. For BDU11 / DU33 / NCA08FA / BDU11RA (Spun) (620070)
F5020011
[1 used]
Baffle 7 1/2" Dia. Ins. Venturi X 5 1/4" Height, .064 x 23.5" 1100-0 Alum. (Spun) (-0 Drill 1.500 Hole) (-1 No Hole) (620067), With Welded Drain.
F8040011-S
[1 used]
BASE, 20GA GALVANIZED, BDU11,BDCR7-11,DU25,30,33 -ORDER WITH 620154
800041
[6 used]
Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
F2140014
[1 used]
Cooling Tube 3 1/2" Out. Dia. X 5 7/8" Long, .080 Wall Thk. Extruded Alum. For BDU11, DU12H, DU30 & DU33 (620307)
F2100001
[2 used]
Cooling Tube Grommet 3 1/2" Ins. Dia., 4 1/2" Out. Dia., 3/8" Thk., Black Silicone Rubber(620047)
800103
[3 used]
Cotter Pin Hammerlock Zinc 1/16 X 1/8 X 4 1/2, Steel
F2030011-S
[3 used]
Horizontal Brace 3 7/8" Long X 1" Wide, 16GA Galv Steel. For BDU11 / DU33
ETL-Label
[1 used]
Label - ETL Information Label. Label located in job docs should be printed and shipped.
90675A195
[8 used]
Lock Nut, 10-32, Zinc Plated Steel with integral star washer. 3/8 inch wrench.
A-17
[3 used]
Ludwig A-17 Clip (Hood Retaining) 1" Width X 2 1/2" Height, Spring Steel - Exh.fans, Includes Mounting Hardware When Shipped As A Replacement Part. Old AX# A0005723.
MANUAL EXHAUST
[1 used]
Manual for PRVs
F5150011-S
[1 used]
Motor Cover 17 1/16" Dia. Ins. X .875" Height, .24GA Galv. (Spun) BDU/HP11,DU25,30,33 Pan Hood
S11
[4 used]
Motor Frame Vibration Eliminator 3/4" Out. Dia. X 1/2" Tall, Rubber (Black), 10-32 x 3/8 dual studs. Durometer = 45. Used on direct drive motors with lugs.
800031
[8 used]
Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
800030
[6 used]
Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
SB6-4-RIVET
[7 used]
RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
800023B
[11 used]
Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
F2050011-S
[1 used]
Shaft Wrapper 17 1/16" Dia. Out. X 13" Height. For BDU/HP11, DU25,30,33
SKID-3237
[1 used]
Skid - 32" X 37" - Used For BDU 11, BDCR 7, 8, 9 & 11, DU/DR 25, 30 & 33.
F5040011-S
[1 used]
TOP PLATE, 20GA GALVANIZED, BDU11,BDCR7,8,9,11 DU25,30,33 (MOTOR MOUNT)
F8030011-P
[4 used]
Vertical Brace Assy With PEM Nut. 1 1/8" X 10 7/8", 16 Ga. Galv. Steel For BDU11 / DU33 / BDCR11 (A0025410).
800011
[4 used]
Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel - 360 PER lbs.
800014
[8 used]
Washer Nylon 1/4 Dia. Ins. X 9/16 Dia. Out. X 1/16 Thk., Nylon (Color White)
F8010010
[1 used]
Wheel Assembly 11 3/4" Dia. Top X 8 3/8" Dia. Ins. Bottom X 6 27/32" High. (620227)
Curbs
Part
CRB19.5X4E ROOF CURB - 19.5" Square X 4" High
CRB19.5X6E ROOF CURB - 19.5" Square X 6" High
CRB19.5X8E ROOF CURB - 19.5" Square X 8" High
CRB19.5X8E ROOF CURB - 19.5" Square X 8" High
CRB19.5X9E ROOF CURB - 19.5" Square X 9" High
CRB19.5X10E ROOF CURB - 19.5" Square X 10" High
CRB19.5X12E ROOF CURB - 19.5" Square X 12" High
CRB19.5X12-BTC BOLT TOGETHER ROOF CURB - 19.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB19.5X13E ROOF CURB - 19.5" Square X 13" High
CRB19.5X14E ROOF CURB - 19.5" Square X 14" High
CRB19.5X15E ROOF CURB - 19.5" Square X 15" High
CRB19.5X16E ROOF CURB - 19.5" Square X 16" High
CRB19.5X18E ROOF CURB - 19.5" Square X 18" High
CRB19.5X20E ROOF CURB - 19-1/2" sq. x 20" high.
CRB19.5X20L-BTC BOLT TOGETHER ROOF CURB -19.5" Square X 20" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB19.5X22E ROOF CURB - 19-1/2" sq. x 22" high.
CRB19.5X22L-BTC BOLT TOGETHER ROOF CURB -19.5" Square X 22" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB19.5X23E ROOF CURB - 19-1/2" sq. x 23" high.
CRB19.5X24E ROOF CURB - 19-1/2" sq. x 24" high.
CRB19.5X24.5E ROOF CURB - 19-1/2" sq. x 24-1/2" high.
CRB19.5X26E ROOF CURB - 19.5" Square X 26" High
CRB19.5X33E CURB - 19.5" Square X 33" High For Exhaust Fans
CRB19.5X34E CURB - 19.5" Square X 34" High For Exhaust Fans
CRB19.5X35E CURB - 19.5" Square X 35" High For Exhaust Fans
CRB19.5X36E CURB - 19.5" Square X 36" High For Exhaust Fans
CRB19.5X39E CURB - 19.5" Square X 39" High For Exhaust Fans
CRB19.5X40E ROOF CURB - 19-1/2" sq. x 40" high.
CRB19.5X42E ROOF CURB - 19-1/2" sq. x 42" high.
CRB19.5X44E ROOF CURB - 19-1/2" sq. x 44" high.
CRB19.5X45E ROOF CURB - 19-1/2" sq. x 45" high.
CRB19.5X48E ROOF CURB - 19-1/2" sq. x 48" high.
CRB19.5X50E ROOF CURB - 19-1/2" sq. x 50" high.
CRB19.5X52E ROOF CURB - 19-1/2" sq. x 52" high.
CRB19.5X54E ROOF CURB - 19-1/2" sq. x 54" high.
CRB19.5X55E ROOF CURB - 19-1/2" sq. x 55" high.
CRB19.5X63E ROOF CURB - 19-1/2" sq. x 63" high.
CRB19.5X64E ROOF CURB - 19-1/2" sq. x 64" high.
CRB19.5X65E ROOF CURB - 19-1/2" sq. x 65" high.
CRB19.5X78E CURB - 19.5" Square X 78" High For Exhaust Fans
CRB19.5X80E CURB - 19.5" Square X 80" High For Exhaust Fans
Options
Part
52012 Turn-tite Low-Pressure Mechanical Test Plug Steel W/Neoprene Seal, for Pipe ID 3.75". Used for Upblast Fan Wheel Access. - Cut Hole with McMaster Carr Hole Saw 4066A54 With Pilot Bit 4066A79.
GC-CUF Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 Gauge) (Includes Down Spout)
Show parts
I 15 BDD w/ 120/240V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 120/240V
Show parts
I 15 BDD w/ 24V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 24V
Show parts
WALLMOUNT 20.5" SQ. x 2" Wall Mount Bracket - 20.5" square x 2" for fans with 21" square base and with 16" centered square hole.
WALLMOUNT 20.5" SQ. x 5" Wall Mount Bracket - 20.5" square x 5" for fans with 21" square base, with 16" centered square hole. Used when gravity damper is ordered.
WBE-11-36 Windband Extension Assembly for Centrifigual Upblast Fan with 11.75" Wheel. 27.350" OD, 36" Height. Constructed of Galvanized Steel Ater 1/1/2016. Includes 3 Quick Release latches & 10 Self Drilling Screws.
Show parts
WBE-11-45-DEGREE Windband Extension Assembly for Centrifigual Upblast Fan with 11.75" Wheel. 27.350" OD, 30" Height. Constructed of Galvanized Steel After 1/1/2016. Includes 3 Quick release latches & 10 Self Drilling Screws. Non-Standard WBE 45 Degree Discharge. 3 Week Lead-Time.
Show parts
FAN HEAT BAFFLE Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
Show parts
EYEBOLTS-3 Eye Bolt 3 - Eye Bolts Are Installed On The Outside Of The Apron / Hood. Used For Guy Line Tie Off On Fans With 3 Tie Off Points.
Show parts
HD-HBKIT-LOCKING HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
HBKIT-01 HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
Show parts
F2050011-CS Shaft Wrapper 17 1/16" Dia. Out. X 8.5" Height. For DU,30 & 33 when used on concession stands. Low Profile Shaft Wrapper.
MIAMI-DADE NOA-1 Aluminum Upblast Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Hinge Kit Label Label - Remove The Hinge Kit Label From The Fan Base.
F2361425 Bird Screen - 1/2" X 1/2" (5" X 56") Wire Screen for Upblast & Downblast Fans DU/DR-25H/30H/33H, BDU/BDCR11, Galv after welded wire cloth.
Ship Loose Disconnect For Remote Mount Disconnect Switch Loose - Wire Is Extended 10' To Allow Remote Mounting Of The NEMA 3R Enclosure & Switch. Cord Fittings Are Installed In Switch Box. 10-32 Hardware and 7/8" Plug Are Installed In Apron Switch Mounting Holes.
Show parts
TCW25/30/33 Teflon Coated Wheel - Lead-Time 3 Weeks - Modify 11" Wheel - Part Number F8010011 To F8010010 By Replacing The Hub To 1/2" - Part Number F2240002.
2E340 Line Voltage Thermostat, 120 or 240 volt, used as fan thermostat in cooling applications. Close on temperature rise. 80-130 degree dial. 2E340. 13.8 amps at 120V, 10 amps at 240V.
Through Wall Curb Mount Through Wall Curb Mount Installation Option.
Wall Mount Construction-DD Wall Mount Construction for Direct Drive Fan. Through-Bolt mount motor for extra support in wall mount application. Vibration isolator mounts not used.
Show parts
I 15 BDD Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
Dry Mode Exhaust Current Sensor Mounted In Exhaust Fan For Use With Pool Room Temp Control
Show parts
Full Crating for Exhaust Fan Full crating for exhaust fans for shipping.
EPO11-Enamel Tan Enamel Coating For 11" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
 
 
 

Security Policy     Privacy Policy     Legal Notice     Warranty     Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.