Sign In         Specifying Software      
 
    Home        About Us        Contact Us        Help Buy Online or Call 1-800-476-5888  
 
 
DDAR10TH Parts
Motors, Pulleys, & Motor Specific Parts
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
S33C252YB-01-60-115 0.033 1 115 V 1.1 0.312" 30 4 lbs 1500 HSSA
ODP (Open Drip Proof)  
S33C252YB-01-60-115 0.033 1 115 V 1.1 0.312" 30 4 lbs 1500 HSSA
ODP (Open Drip Proof)  
S33C252YB-01-60-115 0.033 1 115 V 1.1 0.312" 30 4 lbs 1500 HSSA
ODP (Open Drip Proof)  

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Replacement Parts
Part
800034
[6 used]
A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
800035
[3 used]
Accorn Nut 1/4-20, Steel
F2391810-S
[1 used]
Airshaft 3 3/8" Height X 11" Dia. Ins., 20 Ga. Galv. Steel For DDAR10
F2011810-S
[1 used]
Base 10 15/16" Dia. Out. Extruded 1" High Flange, 20 Ga. Galv. Steel For DDAR10
F2361810
[1 used]
Bird Screen - 1/2" X 1/2" (3 1/4" X 37") Wire Screen For Direct Drive Axial Radial Fans (DDAR10), Galv after welded wire cloth.
LT 1/2 Conduit
[1 used]
Conduit 1/2" Flexible - Non Metallic Gray, For Use With Non Metallic Liquid Tight Connectors.
LT 1/2 90 Connector
[1 used]
Connector 1/2" 90° - Non Metallic Gray, For Use With Non Metallic Liquid Tight Conduit.
F2011810F-S
[1 used]
Flat Base 19" Sq. Out X 10 15/16" Dia. Out. Extruded 1" High Flange, 16 Ga. Galv. Steel For DDAR10 / EMUA10 / GV10 With Flat Base Option.
I 12 BDD
[1 used]
Gravity Back Draft Damper - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq.
F5211810
[1 used]
Hood 5 5/8" Height X 18 5/16" Dia. Out., 9 5/8" Dia. Bolt Circle, .064 x 20" 1100-0 Alum. For DDAR10 (Spun) (620370)
Bushing 7/8
[1 used]
Insulated Snap Bushing - For .875 Hole Diameter.
58361-1/2
[1 used]
Junction Box 2 1/8" X 4" X 1 13/16" Steel City, 16 Ga. Galv. Steel 58361-1/2. 1-7/8" deep
58-C-1
[1 used]
Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
ETL-Label
[1 used]
Label - ETL Information Label. Label located in job docs should be printed and shipped.
MANUAL EXHAUST
[1 used]
Manual for PRVs
800036
[4 used]
Nut Whiz 8-32, Steel
34100000
[1 used]
PROPELLER - 10" dia., 5 blades, 30 deg. pitch with 5/16" bore.
SB6-4-RIVET
[3 used]
RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
SKID-3237
[1 used]
Skid - 32" X 37" - Used For BDU 11, BDCR 7, 8, 9 & 11, DU/DR 25, 30 & 33.
F2041810-S
[1 used]
Top Plate 11" Dia. Out., 18 Ga. Galv. Steel For DDAR10
F8031810-S
[3 used]
Vertical Brace Assembly 5 1/8" Height X 1" Width, 14 Ga. Galv. Steel For DDAR10
800011
[3 used]
Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel - 360 PER lbs.
Curbs
Part
CRB17.5X8E ROOF CURB - 17.5" Square X 8" High
CRB17.5X9E ROOF CURB - 17.5" Square X 9" High
CRB17.5X12E ROOF CURB - 17.5" Square X 12" High
CRB17.5X12-BTC BOLT TOGETHER ROOF CURB - 17.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB17.5X14E ROOF CURB - 17.5" Square X 14" High
CRB17.5X16E Roof Curb 17-1/2" sq. x 16" high
CRB17.5X18E Roof Curb 17-1/2" sq. x 18" high
CRB17.50X20E ROOF CURB - 17.50" Square X 20" High
CRB17.5X20E Roof Curb 17-1/2" sq. x 20" high
CRB17.50X21E ROOF CURB - 17.50" Square X 21" High
CRB17.5x22E ROOF CURB - 17.5" Square X 22" High
CRB17.5x24E ROOF CURB - 17.5" Square X 24" High
CRB17.5x26E ROOF CURB - 17.5" Square X 26" High
CRB17.5x26L-BTC BOLT TOGETHER ROOF CURB - 17.5" Square X 26" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB17.5x52E Roof Curb 17-1/2" sq. x 52" high
CRB17.5x55E Roof Curb 17-1/2" sq. x 55" high
CRB17.5x61E Roof Curb 17-1/2" sq. x 61" high
Options
Part
I 12 BDD w/ 120/240V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq. Actuator is 120/240V
Show parts
I 12 BDD w/ 24V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq. Actuator is 24V
Show parts
WALLMOUNT 18.5"SQ x 2" Wall Mount Bracket - 18.5" square x 2" for fans with 19" square base and with 13" centered square hole.
WALLMOUNT 18.5"SQ x 5" Wall Mount Bracket - 18.5" square x 5" for fans with 19" square base, with 13" centered square hole. Used when gravity damper is ordered.
MIAMI-DADE CERT Miami Dade Impact and Wind Load Certification - Miami Dade County Product Control Approved. Florida Building Code approval. Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized. Exhaust Rails limited to 10" high.
2E340 Line Voltage Thermostat, 120 or 240 volt, used as fan thermostat in cooling applications. Close on temperature rise. 80-130 degree dial. 2E340. 13.8 amps at 120V, 10 amps at 240V.
I 12 BDD Gravity Back Draft Damper - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq.
Full Crating for Exhaust Fan Full crating for exhaust fans for shipping.
EPO11-Enamel Tan Enamel Coating For 11" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
 
 
 

Security Policy     Privacy Policy     Legal Notice     Warranty     Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.