MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
MOTOR MOUNTING ADAPTER PLATE - To mount,1/4, and 1/3 1 phase (48 Frame), 3 HP 1 phase, and 1-3 HP 3 phase 2-speed (145T, 182T, and 184T Frame) motors in belt drive upblast and downblast fans with 18" and 20" wheels.
Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
The manufacturer reserves the right to use alternate motors from
alternate vendors that meet the operating requirements of the fan
but may have slightly different specifications.
Bearing 1" pillow block bearing with cast housing and grease fitting. (8B1000)
1/4-28 x 1/8 Socket Set Screw (2@62°). Serrated Tip Set Screw With Loctite Patch. Set Screw Torque = 85 inch lbs. Grease fitting on opposite side of standard.
Ludwig A-17 Clip (Hood Retaining) 1" Width X 2 1/2" Height, Spring Steel - Exh.fans, Includes Mounting Hardware When Shipped As A Replacement Part. Old AX# A0005723.
Wheel Assembly 20 3/4" Dia. Top X 14 5/8" Dia. Ins. Bottom X 9 3/16" High. Uses 10" Ø T Hub in the BD Configuration with P1 Bushings. *Requires P1 type split taper bushing if ordered as a replacement part.
Belt Tensioner Manual - Used On Up & Down Blast Exhaust Fans 11" Thru 24" - All 3 Phase HP & 1 Phase 2 HP Motors & Below. Not used with DHP 575 V or Explosion Proof - 48 Frame & Up - Can be used on wall mount applications. Standard Version Has 5/16 - 18 x 6" Bolt (92865A609).
Belt Tensioner Spring - Used On Exhaust Fans With 15" Wheels And Larger, Max 1 HP - Three Phase. Not used with DHP 575 V. Used With Stock Motors - 56 Frame Only. Cannot be used in wall mount applications.
Belt Tensioner Spring - Used On Exhaust Fans With 15" Wheels And Larger, Max 2 HP Single Phase And 3 HP Three Phase. Not used with DHP 575 V. Used With Stock Motors - 48 & 56 Frame - Consult Factory For Larger Frame Motors. Cannot be used in wall mount applications.
Wall Mount Bracket - 27.5" square x 2" for fans with 28" square base and with 24" centered square hole. Maximum Motor Size = 2 HP Single and Three & 3 HP Three.
Wall Mount Bracket - 27.5" square x 5" for fans with 28" square base, with 24" centered square hole. Used when gravity damper is ordered. Maximum Motor Size = 2 HP Single and Three & 3 HP Three.
Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Downblast size 18/20. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Tan Enamel Coating For 20" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive.
Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
