Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

BDCR13TH Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

CK48HB06K01-60HZ 0.25 1 115/208-230 V 4.5/2.5-2.3 0.5" 48 21 lbs 1735 HSSA

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HB06K01-50HZ 0.25 1 220 V 2.6 0.5" 48 21 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

B606 0.25 1 277 V 2.1 0.5" 48Z 14 lbs 1725 Marathon

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

B607 0.333 1 277 V 2.5 0.5" 48Z 15 lbs 1725 Marathon

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HB07J01-60HZ 0.333 1 115/208-230 V 5.8/3.2-2.9 0.5" 48 23 lbs 1735 HSSA

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HB07J01-50HZ 0.333 1 220 V 3.3 0.5" 48 23 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HB06H01-60HZ 0.5 1 115/208-230 V 7.6/4.2-3.8 0.625" 56 26 lbs 1730 HSSA

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

CK48HB06H01-50HZ 0.5 1 220 V 4.3 0.625" 56 26 lbs 1435 HSSA

ODP (Open Drip Proof) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

.5018OT3E56-S48PP 0.5 3 208-220-230/380/460 V 1.9-1.7-1.7/0.9/0.9 0.625" 56 20 lbs 1730 WEG

ODP (Open Drip Proof) Pulleys

Show parts

SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

B608 0.5 1 277 V 3.6 0.625" 56 25 lbs 1725 Marathon

ODP (Open Drip Proof) Pulleys

Show parts

SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

.5018OT3E56-S48PP-50HZ 0.5 3 190/220/380/415 V 1.9/1.8/1/1 0.625" 56 20 lbs 1400 WEG

ODP (Open Drip Proof) Pulleys

Show parts

SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

C664V1 0.25 1 115/208-230 V 3.6/1.7-1.8 0.625" 56 16 lbs 1725 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

C223 0.333 1 115/208-230 V 5.2/2.6-2.5 0.625" 56 18 lbs 1725 PRECISION ELECTRIC MOTOR SALES

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts

SJOOW-143	14/3 SJOOW Cord - OD = .365 - 300V Single Phase Applications. Price per foot.
3231	Connector 1/2" Straight - Non Metallic Gray, For Use With SJOOW Cord OD Range .170 To .470. Also used on Residential Hood
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

H868L 0.5 3 208-230/460 V 1.8-1.6/0.9 0.625" 56 18 lbs 1800 Regal Beloit/A.O. Smith

TEFC (Totally Enclosed Fan Cooled) Pulleys

Show parts

SOOW-144	14/4 SOOW Cord - OD .572 - 600V Three Phase Applications. Price per foot.
LPCG507	Connector 1/2" Straight - Non Metallic Gray, For Use With SOOW / SJOOW Cord OD Range .385 To .750.
810022	Green Ground Screw
58371-1/2	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
58-C-1	Junction Box Cover 58C30 (10004) 2 1/4" X 4 1/8" X 3/16, 24 Ga. Zinc Plated Steel (810091)
F2100008	MOTOR MOUNTING ADAPTER PLATE - To mount non-standard motors in belt drive upblast and downblast fans with 13" or 15" wheels.
800023B	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800043 [4 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800032 [12 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
800034 [12 used]	A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
F5020013 [1 used]	Baffle 9 1/16" Dia. Ins. Venturi X 5 3/4" Height, .080 x 26" 1100-0 Alum. (Spun) (-0 Drill 1.500 Hole) (-1 No Hole) (620068), With Welded Drain.
F8040013-S [1 used]	BASE, 20GA GALVANIZED, BDU/BDCR13,DU50
UCP204-12-AH-SP4 [2 used]	Bearing 3/4" pillow block bearing with cast housing and grease fitting. (8B0750) 1/4-28 x 1/8 Socket Set Screw (2@62°). Serrated Tip Set Screw With Loctite Patch. Set Screw Torque = 85 inch lbs. Grease fitting on opposite side of standard.
F2360013 [1 used]	Bird Screen - 1/2" x 1/2" (6 1/2" X 63") Wire Screen for Upblast & Downblast Fans DU/DR-50H, BDU/BDCR13, Galv after welded wire cloth.
800048 [4 used]	Bolt Whiz 1/4-20 X 1/2, Steel
92323A558 [4 used]	Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
LT 1/2 Conduit [2 used]	Conduit 1/2" Flexible - Non Metallic Gray, For Use With Non Metallic Liquid Tight Connectors.
ETL-Label [1 used]	Label - ETL Information Label. Label located in job docs should be printed and shipped.
800113-D40 [4 used]	Motor Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black with Marking) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 40
F8020013 [1 used]	Motor Plate / Angles Weldment (14 13/16" X 6 1/2" Mounting Holes) For BDU13 / BDCR13 (620024)
800031 [8 used]	Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
F2180013 [1 used]	Shaft 3/4" X 16", Material 1045 Cold Drawn Steel. (620102)
800104 [2 used]	Shaft Key 3/16" X 3/16" X 1 1/4" Long, Steel
SKID-4242 [1 used]	Skid - 42" X 42" - Used For BDU/BDCR 13 & 15, DU/DR 50 & 85.
F2200006 [4 used]	Standoff Hex Head MF 1/4-20 4625.2520A 1/2" Dia. I.D. Hex, Zinc Plated Steel
F5040013-S [1 used]	TOP PLATE, 20GA GALVANIZED, BDU/BDCR13,DU50,DR75 (MOTOR MOUNT) F5040013
F8030013-P [4 used]	Vertical Brace Assy With PEM Nut. 1 1/8" X 11 7/8", 16 Ga. Galv. Steel For BDU13 / DU50 / BDCR13 (A0025412)
800011 [4 used]	Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel - 360 PER lbs.
800014 [8 used]	Washer Nylon 1/4 Dia. Ins. X 9/16 Dia. Out. X 1/16 Thk., Nylon (Color White)
5/16-18 WHIZNUT [4 used]	Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.

Curbs

Part
CRB19.5X4E	ROOF CURB - 19.5" Square X 4" High
CRB19.5X6E	ROOF CURB - 19.5" Square X 6" High
CRB19.5X8E	ROOF CURB - 19.5" Square X 8" High
CRB19.5X8E	ROOF CURB - 19.5" Square X 8" High
CRB19.5X9E	ROOF CURB - 19.5" Square X 9" High
CRB19.5X10E	ROOF CURB - 19.5" Square X 10" High
CRB19.5X12E	ROOF CURB - 19.5" Square X 12" High
CRB19.5X12-BTC	BOLT TOGETHER ROOF CURB - 19.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB19.5X13E	ROOF CURB - 19.5" Square X 13" High
CRB19.5X14E	ROOF CURB - 19.5" Square X 14" High
CRB19.5X15E	ROOF CURB - 19.5" Square X 15" High
CRB19.5X16E	ROOF CURB - 19.5" Square X 16" High
CRB19.5X18E	ROOF CURB - 19.5" Square X 18" High
CRB19.5X20E	ROOF CURB - 19-1/2" sq. x 20" high.
CRB19.5X20L-BTC	BOLT TOGETHER ROOF CURB -19.5" Square X 20" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB19.5X22E	ROOF CURB - 19-1/2" sq. x 22" high.
CRB19.5X22L-BTC	BOLT TOGETHER ROOF CURB -19.5" Square X 22" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB19.5X23E	ROOF CURB - 19-1/2" sq. x 23" high.
CRB19.5X24E	ROOF CURB - 19-1/2" sq. x 24" high.
CRB19.5X24.5E	ROOF CURB - 19-1/2" sq. x 24-1/2" high.
CRB19.5X26E	ROOF CURB - 19.5" Square X 26" High
CRB19.5X33E	CURB - 19.5" Square X 33" High For Exhaust Fans
CRB19.5X34E	CURB - 19.5" Square X 34" High For Exhaust Fans
CRB19.5X35E	CURB - 19.5" Square X 35" High For Exhaust Fans
CRB19.5X36E	CURB - 19.5" Square X 36" High For Exhaust Fans
CRB19.5X39E	CURB - 19.5" Square X 39" High For Exhaust Fans
CRB19.5X40E	ROOF CURB - 19-1/2" sq. x 40" high.
CRB19.5X42E	ROOF CURB - 19-1/2" sq. x 42" high.
CRB19.5X44E	ROOF CURB - 19-1/2" sq. x 44" high.
CRB19.5X45E	ROOF CURB - 19-1/2" sq. x 45" high.
CRB19.5X48E	ROOF CURB - 19-1/2" sq. x 48" high.
CRB19.5X50E	ROOF CURB - 19-1/2" sq. x 50" high.
CRB19.5X52E	ROOF CURB - 19-1/2" sq. x 52" high.
CRB19.5X54E	ROOF CURB - 19-1/2" sq. x 54" high.
CRB19.5X55E	ROOF CURB - 19-1/2" sq. x 55" high.
CRB19.5X63E	ROOF CURB - 19-1/2" sq. x 63" high.
CRB19.5X64E	ROOF CURB - 19-1/2" sq. x 64" high.
CRB19.5X65E	ROOF CURB - 19-1/2" sq. x 65" high.
CRB19.5X78E	CURB - 19.5" Square X 78" High For Exhaust Fans
CRB19.5X80E	CURB - 19.5" Square X 80" High For Exhaust Fans

Options

Part
I 15 BDD w/ 120/240V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 120/240V
Show parts
	MTR-611 [1 used]	120/240 v Motor Pack for I Series Backdraft Dampers
	I 15 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
I 15 BDD w/ 24V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 24V
Show parts
	MTR-611 24V [1 used]	24 V Motor Pack for I Series Backdraft Dampers
	I 15 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
I 15 BDD w/ 460V Motor	MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 460V
Show parts
	MTR-611-460 [1 used]	460 v Motor Pack for I Series Backdraft Dampers
	I 15 BDD [1 used]	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
WALLMOUNT 20.5" SQ. x 2"	Wall Mount Bracket - 20.5" square x 2" for fans with 21" square base and with 16" centered square hole.
WALLMOUNT 20.5" SQ. x 5"	Wall Mount Bracket - 20.5" square x 5" for fans with 21" square base, with 16" centered square hole. Used when gravity damper is ordered.
FAN HEAT BAFFLE	Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
Show parts
	INSULATION/sq ft [3 used]	INSULATION (Price per Sq Foot)
XB-2	Extra Set of V-Belts. Only to be ordered as fan option at time fan is ordered.
EYEBOLTS-4	Eye Bolt 4 - Eye Bolts Are Installed On The Outside Of The Apron / Hood. Used For Guy Line Tie Off On Fans With 4 Tie Off Points.
Show parts
	9489T170 [4 used]	Eye Bolt - Light Duty With Nut, Zinc Plated, 1/4-20 x 7/8" Threads - 1" Shank.
	800031 [4 used]	Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
	800011 [8 used]	Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel - 360 PER lbs.
HBKIT-01	HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
Show parts
	800032 [6 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	31817 [30 used]	Self Drilling Screw - 12 - 14 X 3/4" - Steel, Zinc Coated - Used To Mount Hinge Kits.
MIAMI-DADE NOA-1 Aluminum Downblast 13	Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Downblast size 13. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Show parts
	F237DB13 [1 used]	Angle Ring 1/8" X 1" X 1" Aluminum Angle, 29.719" Dia. Out. For BDCR 13 (620366)
	800023B [6 used]	Self Drilling Screw 1/4-14 X 1 1/4", with rubber washer, drill & tap HWBS.
Through Wall Curb Mount	Through Wall Curb Mount Installation Option.
I 15 BDD	Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
Full Crating for Exhaust Fan	Full crating for exhaust fans for shipping.
EPO13-Enamel	Tan Enamel Coating For 12" or 13" Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.