Fan Parts

Specifying Software

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

WPD-72TH-A Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP0206-50 20 3 190/380 V 59.6/29.8 1.875" 286T 364 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

DTP0206 20 3 208-230/460 V 55-49.7/24.9 1.875" 286T 364 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

02012OT3H286T-W40 20 3 575 V 19.4 1.875" 286T 383 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

01509ET3E286T-W22-50 10 3 190/380 V 32.8/16.4 1.875" 286T 431 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

01509ET3E286T-W22 15 3 208-230/460 V 42.9-38.8/19.4 1.875" 286T 417 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

NP0206-50 20 3 190/380 V 59.6/29.8 1.875" 286T 454 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

NP0206 20 3 208-230/460 V 53.7-48.6/24.3 1.875" 286T 454 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

02012ET3H286T-W22 20 3 575 V 19.4 1.875" 286T 447 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Q1-1-7/8

1-7/8" "Q1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-7/8" Shaft Diameter.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
99904A104 [36 used]	Nut Whiz - Zinc-Plated Steel Serrated-Flange Hex Locknut 1/2"-13 Thread Size, 3/4" W, 29/64" O'all Height. Grade 5.
SSPI-08-06-RIVET [66 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.

Options

Part
Shaft Grounding Ring Option	Shaft Grounding Ring Option
WPD72-BDDM	Wall Prop 72 Motorized Back Draft Damper
Show parts
	NFBUP-S [2 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
WPD72-MLD	Wall Prop Motorized Louver Damper
Show parts
	NFBUP-S [2 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
EPOWP-Enamel	Tan Enamel Coating For WP10-20 and WPD20-72. Weather Hood Painted Only. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
WP72GS	Wall Prop 72 Gaurd Screen for front of Wall Box.
WP72-SUPPLYLD	Supply option for WPD-72. Includes louver damper assembly.
Show parts
	NFBUP-S [2 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	2G4D-1/2-3/4 [2 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
WP72-SUPPLY	Supply option for WPD-72. Includes supply weather hood assembly and intake screen.
Show parts
	WP72WHAS [1 used]	Wall Prop 72 Supply Weather Hood Assembly (Top, Bottom, and Side).
WP72WBOX	Wall Prop 72 Wall Box Assembly with Guard Screen.
Show parts
	800043 [12 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800032 [12 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03224 [8 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
	MLIFTL [4 used]	LIFTING LUG
	SB6-4-RIVET [32 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	90064A620 [20 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
	SSPI-08-06-RIVET [32 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
WP72WC-8	Wall Prop 72 Wall Collar (Set of 8).
Show parts
	90064A620 [96 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
WP72WHA	Wall Prop 72 Exhaust Weather Hood Assembly (Top, Bottom, and Side).
Show parts
	800043 [4 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800032 [4 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	0120763.0800 [8 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03224 [8 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
	MCONWAS [4 used]	Connecting Washer 12 Gauge 2-7/8" x 2-7/8"
	MLIFTL [4 used]	LIFTING LUG
	SB6-4-RIVET [67 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	90064A620 [40 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.