Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

RPUD-42TH-X Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP7/56 7.5 3 208-230/460 V 22.3-20.2/10.1 1.625" 254T 170 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

DTP7/56-50 7.5 3 190/220/380 V 22.3/19.3/11.2 1.625" 254T 170 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

00312ET3E213T-W22 3 3 208-230/460 V 9.7-8.8/4.4 1.375" 213T 99 lbs 1175 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-3/85/16	1-3/8" "P1" Steel Split Taper Bushing with key set screw. 5/16" Keyway. Used On Applications With a 1-3/8" Shaft Diameter.
MTRADP254T-213T	Motor Adapter Assembly for using 213T frame motors on USBI24-30DD, SIF24-30DD.

00509ET3E254T-W22-50 4 3 190/380 V 15.5/7.8 1.625" 254T 284 lbs 730 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

00509ET3E254T-W22 5 3 208-230/460 V 16.8-15.2/7.6 1.625" 254T 284 lbs 880 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

NP7/56 7.5 3 208-230/460 V 21.1-19.1/9.6 1.625" 254T 267 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

NP7/56-50 7.5 3 190/380 V 22.4/11.2 1.625" 254T 267 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

00712ET3H254T-W22 7.5 3 575 V 7.6 1.625" 254T 316 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

P1-1-5/8

1-5/8" "P1" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-5/8" Shaft Diameter.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800043 [12 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800032 [52 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
0120763.0800 [12 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
11626-03224 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
8451A84 [10 used]	Heavy Duty Plastic U-channel Push on trim (per foot). 1/64" -1/32" wide, 3/8" outside height.
800030 [2 used]	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
SB6-4-RIVET [190 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
9540K26 [2 used]	Rubber Bumper with unthreaded hole, SBR, Concave, 31/32" OD.
90064A633 [12 used]	Self Drilling Sheet Metal Screw. 1/4"-14 Thread, 2.5" Long, Drill Point #3. 3/8" Hex Head.
SSPI-08-06-RIVET [66 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
91090A115 [20 used]	Washer. Zinc-Plated Steel Oversized Washer for 3/8" Screw Size, 0.406" ID, 1.5" OD.

Curbs

Part
CRB58X12E	ROOF CURB - 58" sq.x 12" high for exhast fan
CRB58X20E	ROOF CURB - 58" Square X 20" High
CRB58X24E	ROOF CURB - 58" Square X 24" High
CRB58X30E	ROOF CURB - 58" Square X 30" High
CRB58X48E	ROOF CURB - 58" Square X 48" High.

Options

Part
RPU42DAO	Roof Prop Up-blast 42 Damper Assembly Option.
Show parts
	SB6-4-RIVET [34 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	RPUSTRKPLT [2 used]	Roof Prop Up-blast Magnet Steel Strike Plate. Mounts to underside of butterfly damper.
	H9295LH-02 [2 used]	Small Locking Spring Pin (Left) used on RPUD20-48.
	H9295RH-02 [2 used]	Small Locking Spring Pin (Right) used on RPUD20-48.
RPUDMO4	Roof Prop Up-blast Damper Magnetic Latch Option for fans with 4 magnets.
Show parts
	02-20-411-10 [4 used]	5.5 lbs round black plastic magnet used to hold dampers down on RPUD models.
	SB6-4-RIVET [16 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
RPU4248ADO	Roof Prop Up-blast 42/48 Access Door Option.
Show parts
	0120763.0800 [10 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03224 [10 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
	SB6-4-RIVET [160 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.