Fan Parts

Specifying Software

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

RPUD-24TH-MS Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP0016 1 3 208-230/380/460 V 3.8-3.4/1.9/1.7 0.875" 145T 36 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP0016-50 1 3 190/380 V 3.6/1.8 0.875" 145T 36 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP1/54 1.5 3 190/208-230/380/460 V 4.6/4.4-4/2.3/2 0.875" 145 46 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP1/54-50HZ 1.5 3 190/208/380/415 V 4.7/4.4/2.3/2.3 0.875" 145 46 lbs 1426 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP0024 2 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP0024-50HZ 2 3 190/220/380 V 6.5/5.5/3.2 0.875" 145T 44 lbs 1415 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00112ET3H145T-W22 1 3 575 V 1.4 0.875" 145T 55 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0016-50 1 3 190/380 V 3.6/1.8 0.875" 145T 37 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0016 1 3 208-230/460 V 3.9-3.5/1.8 0.875" 145T 37 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP1/54-50 1.5 3 190/380 V 4.8/2.4 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP1/54 1.5 3 190/200-208-230/380/400/460 V 4.3/4.3-4.5-4/2.1/2.1/2.1 0.875" 145T 40 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00158ET3H145T-W22 1.5 3 575 V 1.6 0.875" 145T 53 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00218ET3H145T-W22 2 3 575 V 2.2 0.875" 145T 54 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0024-50 2 3 190/220/380 V 6.2/6.1/3.1 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0024 2 3 190/200-208-230/380/400/460 V 6/5.9-5.7-5.2/3/2.9/2.6 0.875" 145T 40 lbs 1740 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800043 [12 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
800032 [52 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
0120763.0800 [12 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
11626-03224 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
8451A84 [6 used]	Heavy Duty Plastic U-channel Push on trim (per foot). 1/64" -1/32" wide, 3/8" outside height.
800030 [2 used]	Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
PP2024-INTAKE-DD [1 used]	Prop Fan Direct Drive Power Pack Assembly for 20/24. Mounts on Intake side of Venturi.
SB6-4-RIVET [126 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
9540K26 [1 used]	Rubber Bumper with unthreaded hole, SBR, Concave, 31/32" OD.
90064A633 [12 used]	Self Drilling Sheet Metal Screw. 1/4"-14 Thread, 2.5" Long, Drill Point #3. 3/8" Hex Head.
SSPI-08-06-RIVET [56 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
91090A115 [20 used]	Washer. Zinc-Plated Steel Oversized Washer for 3/8" Screw Size, 0.406" ID, 1.5" OD.

Curbs

Part
CRB34X6E	ROOF CURB - 34" sq.x 6" high for exhaust fan
CRB34.0X12E	ROOF CURB - 34.0" Square X 12" High.
CRB34X12E	ROOF CURB - 34" sq.x 12" high for exhaust fan
CRB34X14E	ROOF CURB - 34" sq.x 14" high for exhaust fan
CRB34.0X18E	ROOF CURB - 34.0" Square X 18" High.
CRB34X20E	ROOF CURB - 34" sq.x 20" high for exhaust fan
CRB34X24E	ROOF CURB - 34" sq.x 24" high for exhaust fan
CRB34x25	CURB - 34.0" Square X 25" Height
CRB34X26E	ROOF CURB - 34" sq.x 26" high for exhaust fan
CRB34X30E	ROOF CURB - 34" Square X 30" High.
CRB34X35.5E	ROOF CURB - 34.0" Square X 35.5" High.
CRB34.00x42E	CURB - 34.00" Square X 42" Height

Options

Part
RPU24DAO	Roof Prop Up-blast 24 Damper Assembly Option.
Show parts
	SB6-4-RIVET [34 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	RPUSTRKPLT [2 used]	Roof Prop Up-blast Magnet Steel Strike Plate. Mounts to underside of butterfly damper.
	H9295LH-02 [2 used]	Small Locking Spring Pin (Left) used on RPUD20-48.
	H9295RH-02 [2 used]	Small Locking Spring Pin (Right) used on RPUD20-48.
RPUDMO2	Roof Prop Up-blast Damper Magnetic Latch Option for fans with 2 magnets.
Show parts
	02-20-411-10 [2 used]	5.5 lbs round black plastic magnet used to hold dampers down on RPUD models.
	SB6-4-RIVET [8 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
RPU2024ADO	Roof Prop Up-blast 20/24 Access Door Option.
Show parts
	0120763.0800 [10 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03224 [10 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
	SB6-4-RIVET [100 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.