Fan Parts

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

WPD-30TH-X Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP1/56 1.5 3 208-230/415/460 V 6.6-6/2.6/3 1.125" 182T 62 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

DTP1/56-50 1.5 3 190/220/380/415 V 5.5/4.8/2.8/2.6 1.125" 182T 62 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

00212OT3H184T-S 2 3 575 V 2.3 1.125" 184T 67 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

DTP0026 2 3 208-230/415/460 V 8.3-7.5/3.1/3.8 1.125" 184T 68 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

DTP0026-50 2 3 190/380/415 V 7.2/3.6/3.1 1.125" 184T 68 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

00212ET3E184T-W22 2 3 208-230/460 V 7.2-6.5/3.3 1.125" 182T 99 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

DTP0036 3 3 208-230/380/460 V 10.2-9.2/5.4/4.6 1.375" 213T 120 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

BMN145-2.0I2-CS-UB1-60 (1200RPM) 2 1 208-230 V 15.5-14 0.875" 145T 25 lbs 1250 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

BMN145-2.0I2-CS-UB1-50 (1200RPM) 2 1 208-230 V 15.5-14 0.875" 145T 25 lbs 1250 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

BMN145-2.0I3-CS-UB1-60 (1200RPM) 2 3 208-230 V 8.5-7.7 0.875" 145T 25 lbs 1250 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

BMN145-2.0I3-CS-UB1-50 (1200RPM) 2 3 208-230 V 8.5-7.7 0.875" 145T 25 lbs 1250 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

Show parts

H-7/8	7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.
MTRADP182T-145T	Motor Adapter Assembly for using 145T frame motors on USBI18DD, SIF18DD, CASRE20DD.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

GP1/56 1.5 3 208-230/460 V 6.5-5.8/2.9 1.125" 182T 65 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

00152ET3H182T-W22 1.5 3 575 V 2 1.125" 182T 97 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

00212ET3H184T-W22 2 3 575 V 2.6 1.125" 182T 103 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

GP0026 2 3 200-208-230/460 V 7.6-7.3-6.6/3.3 1.125" 184T 84 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

Show parts

H-1-1/8	1-1/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 1-1/8" Shaft Diameter.
MTRADP213T-182T	Motor Adapter Assembly for using 182T frame motors on USBI20DD, SIF20DD, CASRE24DD.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800032 [24 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
PP3036-INTAKE-DD [1 used]	Prop Fan Direct Drive Power Pack Assembly for 30/36. Mounts on Intake side of Venturi.
SSPI-08-06-RIVET [36 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
91090A115 [12 used]	Washer. Zinc-Plated Steel Oversized Washer for 3/8" Screw Size, 0.406" ID, 1.5" OD.

Options

Part
MSC w/ 10KLVC-DB	ECM Wiring Package - Exhaust - Manual Potentiometer Speed Control -MSC-
Show parts
	10KLVC-DB [1 used]	10K OHM POTENTIOMETER WITH INTEGRATED WALL PLATE.
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package - MSC - MODBUS	ECM Wiring Package - Exhaust - MODBUS Control -MSC- (TELCO), CCW Rotation
Show parts
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package-ECPM03	ECM Wiring Package - PWM Signal from ECPMO3 Prewire (TELCO Motor), CCW Rotation
WPD3036-BDD	Wall Prop 30/36 Gravity Back Draft Damper
Shaft Grounding Ring Option	Shaft Grounding Ring Option
WPD3036-BDDM	Wall Prop 30/36 Motorized Back Draft Damper
Show parts
	NFBUP-S [1 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	58371-1/2 [1 used]	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
WPD3036-MLD	Wall Prop 30/36 Motorized Louver Damper
Show parts
	NFBUP-S [1 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	58371-1/2 [1 used]	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
EPOWP-Enamel	Tan Enamel Coating For WP10-20 and WPD20-72. Weather Hood Painted Only. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
WP3036GS	Wall Prop 30/36 Gaurd Screen for front of Wall Box.
WP3036-SUPPLYLD	Supply option for WPD-30/36. Includes louver damper assembly.
Show parts
	NFBUP-S [1 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 1/8" - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
	PP3036-INTAKE-DD [-1 used]	Prop Fan Direct Drive Power Pack Assembly for 30/36. Mounts on Intake side of Venturi.
WP3036-SUPPLY	Supply option for WPD-30/36. Includes supply weather hood assembly and intake screen.
Show parts
	PP3036-INTAKE-DD [-1 used]	Prop Fan Direct Drive Power Pack Assembly for 30/36. Mounts on Intake side of Venturi.
	WP3036WHAS [1 used]	Wall Prop 30/36 Supply Weather Hood Assembly (Top, Bottom, and Side).
WP3036WBOX	Wall Prop 30/36 Wall Box Assembly with Guard Screen.
Show parts
	800043 [12 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800032 [12 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	0120763.0800 [24 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03227 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 12 gauge material.
	11626-03224 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
	MLIFTL [4 used]	LIFTING LUG
	SB6-4-RIVET [24 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	90064A620 [20 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
	SSPI-08-06-RIVET [32 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
WP3036WC-8	Wall Prop 30/36 Wall Collar (Set of 8).
Show parts
	90064A620 [48 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
WP3036WHA	Wall Prop 30/36 Exhaust Weather Hood Assembly with Guard (Top, Bottom, Side, and screen).
Show parts
	800043 [2 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800032 [2 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	0120763.0800 [4 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03224 [4 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 20 gauge material.
	MLIFTL [2 used]	LIFTING LUG
	SB6-4-RIVET [38 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	90064A620 [36 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.