Fan Parts

Specifying Software

Home About Us Contact Us Help

Buy Online or Call 1-800-476-5888

Heaters

Exhaust Fans

Make-Up Air

Accessories » Economy Inline Filtered Modular Packaged Unit Rooftop Filtered

Cooling Modules Heating Modules Intake/Discharge Accessories

DUCTWORK

Single Wall Grease Duct Double Wall Grease Duct Chimney Special Gas Vent HVAC Supply Duct

Kitchen Ventilation

HVAC

CASLINK

Resources

WPD-24TH-MS Parts

Motors, Pulleys, & Motor Specific Parts

Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor

DTP0016 1 3 208-230/380/460 V 3.8-3.4/1.9/1.7 0.875" 145T 36 lbs 1150 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP0016-50 1 3 190/380 V 3.6/1.8 0.875" 145T 36 lbs 958 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00112OT3H145T-S 1 3 575 V 1.3 0.875" 145T 35 lbs 1150 WEG

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00158OT3H145T-S 1.5 3 575 V 1.6 0.875" 145T 42 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP1/54 1.5 3 190/208-230/380/460 V 4.6/4.4-4/2.3/2 0.875" 145 46 lbs 1750 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP1/54-50HZ 1.5 3 190/208/380/415 V 4.7/4.4/2.3/2.3 0.875" 145 46 lbs 1426 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP0024 2 3 190/208-230/380/460 V 5.9/6.1-5.5/2.9/2.7 0.875" 145T 44 lbs 1740 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

DTP0024-50HZ 2 3 190/220/380 V 6.5/5.5/3.2 0.875" 145T 44 lbs 1415 Mimco/TECO

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00218OT3H145T-S 2 3 575 V 2.1 0.875" 145T 39 lbs 1750 WEG

ODP, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

BMN145-2.0I2-ES-UB1-60 (1800RPM) 2 1 208-230 V 15.5-14 0.875" 145T 25 lbs 1850 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

BMN145-2.0I2-ES-UB1-50 (1800RPM) 2 1 208-230 V 15.5-14 0.875" 145T 25 lbs 1850 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

BMN145-2.0I3-ES-UB1-60 (1800RPM) 2 3 208-230 V 8.5-7.7 0.875" 145T 25 lbs 1850 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

BMN145-2.0I3-ES-UB1-50 (1800RPM) 2 3 208-230 V 8.5-7.7 0.875" 145T 25 lbs 1850 Telco Intercontinental Corp

TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0016 1 3 208-230/460 V 3.9-3.5/1.8 0.875" 145T 37 lbs 1150 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0016-50 1 3 190/380 V 3.6/1.8 0.875" 145T 37 lbs 958 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00112ET3H145T-W22 1 3 575 V 1.4 0.875" 145T 55 lbs 1150 WEG

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00158ET3H145T-W22 1.5 3 575 V 1.6 0.875" 145T 53 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP1/54 1.5 3 190/200-208-230/380/400/460 V 4.3/4.3-4.5-4/2.1/2.1/2.1 0.875" 145T 40 lbs 1800 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP1/54-50 1.5 3 190/380 V 4.8/2.4 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0024 2 3 190/200-208-230/380/400/460 V 6/5.9-5.7-5.2/3/2.9/2.6 0.875" 145T 40 lbs 1740 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

GP0024-50 2 3 190/220/380 V 6.2/6.1/3.1 0.875" 145T 40 lbs 1440 Mimco/TECO

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

00218ET3H145T-W22 2 3 575 V 2.2 0.875" 145T 54 lbs 1750 WEG

TEFC, Premium (E-Plus3) Eff.

H-7/8

7/8" "H" Steel Split Taper Bushing with key set screw. Used On Applications With a 7/8" Shaft Diameter.

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.

Replacement Parts

Part
800032 [18 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
PP2024-INTAKE-DD [1 used]	Prop Fan Direct Drive Power Pack Assembly for 20/24. Mounts on Intake side of Venturi.
SSPI-08-06-RIVET [36 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
91090A115 [12 used]	Washer. Zinc-Plated Steel Oversized Washer for 3/8" Screw Size, 0.406" ID, 1.5" OD.

Options

Part
MSC w/ 10KLVC-DB	ECM Wiring Package - Exhaust - Manual Potentiometer Speed Control -MSC-
Show parts
	10KLVC-DB [1 used]	10K OHM POTENTIOMETER WITH INTEGRATED WALL PLATE.
	CAS MSC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% or 0 to 10V speed reference with rpm indication. 24VAC/24VDC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces: ECM-VCU-RTC. Controller needs initial programming before shipping from the factory.
ECM Wiring Package-RTC	ECM Wiring Package - Manual or 0-10VDC Reference Speed Control -RTC- (TELCO Motor), CCW Rotation
Show parts
	ECM-VCU-RTC [1 used]	Motor Speed Control for EC motors. For use with Nidec and Telco EC motors. Uses 0 to 100% speed reference with rpm indication. 24VAC input. Controls 4 Pole/1800 RPM motor with PWM input. Includes 0-10VDC input speed reference pins. Part replaces EVO/ECM-VCU-36-MP and EVO/ECM-ACU+S1.1-MP.
ECM Wiring Package-ECPM03	ECM Wiring Package - PWM Signal from ECPMO3 Prewire (TELCO Motor), CCW Rotation
WPD2024-BDD	Wall Prop 20/24 Gravity Back Draft Damper
Shaft Grounding Ring Option	Shaft Grounding Ring Option
WPD2024-BDDM	Wall Prop 20/24 Motorized Back Draft Damper
Show parts
	NFBUP-S [1 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	58371-1/2 [1 used]	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
WPD2024-MLD	Wall Prop 20/24 Motorized Louver Damper
Show parts
	NFBUP-S [1 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	58371-1/2 [1 used]	Junction Box - 2 1/8" X 4" X 2 1/16" - Used for mounting Speed Controls and 3 pole switches. 2-1/8" Deep.
EPOWP-Enamel	Tan Enamel Coating For WP10-20 and WPD20-72. Weather Hood Painted Only. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
WP2024GS	Wall Prop 20/24 Gaurd Screen Option.
Show parts
	WP2024RGSCREENCOV [1 used]	Wall Prop 20/24 Rear Gaurd Screen Cover.
WP2024-SUPPLYLD	Supply option for WPD-20/24. Includes louver damper assembly.
Show parts
	NFBUP-S [1 used]	ACTUATOR - NF Series (DCA) Spring Return, 90 in-lb torque. Running time <75 sec. (on/off) & <60 sec (spring), 24-240vac, 24-125vdc, 6.5VA @ 120vac, 95° Angle rotation, 1/2" to 1.05" Shaft dia, Visual position indicator, Control direction CW. Direct Replacement for NF120-S.
	2G4D-1/2-3/4 [1 used]	Junction Box - 4" X 4" X 2 " - 1/2" and 3/4" Knockouts. Used for mounting Speed Controls and 3 pole switches
	PP2024-INTAKE-DD [-1 used]	Prop Fan Direct Drive Power Pack Assembly for 20/24. Mounts on Intake side of Venturi.
WP2024-SUPPLY	Supply option for WPD-20/24. Includes supply weather hood assembly and intake screen.
Show parts
	PP2024-INTAKE-DD [-1 used]	Prop Fan Direct Drive Power Pack Assembly for 20/24. Mounts on Intake side of Venturi.
	WP2024WHAS [1 used]	Wall Prop 20/24 Supply Weather Hood Assembly (Top, Bottom, and Side).
WP2024WBOX	Wall Prop 20/24 Wall Box Assembly with Guard Screen.
Show parts
	800043 [12 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800032 [12 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	0120763.0800 [12 used]	A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
	11626-03227 [12 used]	Cage Nut - 1/4" - 20. Installed in 1/2" square hole. Used on 12 gauge material.
	MLIFTL [4 used]	LIFTING LUG
	SB6-4-RIVET [10 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	90064A620 [20 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
	SSPI-08-06-RIVET [32 used]	SSPI - 08 - 06 Interlock Rivet - 1/4" Diameter - Grip Range Min = .080" / Max = .375". Interlock™ RIVET Fastening System.
	WP2024RGSCREENCOV [1 used]	Wall Prop 20/24 Rear Gaurd Screen Cover.
WP2024WC-8	Wall Prop 20/24 Wall Collar (Set of 8).
Show parts
	90064A620 [40 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
WP2024WHA	Wall Prop 20/24 Exhaust Weather Hood Assembly with Guard (Top, Bottom, Side, and screen).
Show parts
	800043 [2 used]	A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
	800032 [2 used]	A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
	MLIFTL [2 used]	LIFTING LUG
	SB6-4-RIVET [20 used]	RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
	90064A620 [36 used]	Self Drilling Screw - 1/4-14 X 1" Long - Zinc Plate Steel - Used On Duct Vertical Support Plate Assembly.
	WP2024FGSCREENCOV [1 used]	Wall Prop 20/24 Front Gaurd Screen Cover.
VAV-WP-BSPC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Building Static Pressure Variable Frequency Drive Control Included
Show parts
	A3300-0-LT [1 used]	Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
	RPPHOTOHELIC BOX [1 used]	Photohelic remote panel box and lid for the 3300-0-LT Photohelic guage. 7" square x 9" high.
	A-306 [1 used]	Static Pressure Kit for Photohelic, contains 1/8" id tubing, fittings and outdoor sensor.
VAV-WP-MC	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans. Manual Speed Control Variable Frequency Drive Included
VAV-WP-PS	VAV (Variable-Air-Volume) Wiring Package for Commercial Fans with Frequency Drive. Preset Speed or Speed Reference Variable Frequency Drive Input Field Wired
VFDINUNIT	VFD factory mounted and wired in unit control vestibule.

Security Policy		Privacy Policy		Legal Notice		Warranty		Return Policy
Copyright ® 2003-2014 Thermotek All Rights Reserved.